Scribd
Upload
124 views

Power System Engineering Lecture 24

The document discusses electrical characteristics and grading of cables. It covers topics like insulation resistance, cable inductance, capacitance, grading techniques like capacitance and intersheath grading to reduce electric field stress differences. Loss tangent of different materials and factors affecting breakdowns in cables are also summarized.

Uploaded by

nnvpratap
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
124 views

Power System Engineering Lecture 24

The document discusses electrical characteristics and grading of cables. It covers topics like insulation resistance, cable inductance, capacitance, grading techniques like capacitance and intersheath grading to reduce electric field stress differences. Loss tangent of different materials and factors affecting breakdowns in cables are also summarized.

Uploaded by

nnvpratap
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 19

Review of Last Class

Electrical Characteristics of Cables

Insulation resistance Cable inductance (Empirical relations due presence of sheath, amour, shields, etc.) Cable capacitance

Belted core cable (Empirical relations, measurement method) Grading of cable


Electrical stress inside insulation

Capacitance grading Inter-sheath grading

Dielectric losses and tan delta (loss tangent) Sheath and armour losses Breakdowns in cable insulations

Electric Stress in The Cable

Maximum stress occurs at the surface of conductor

Minimum stress occurs at the sheath surface

Electric Stress in The Cable

Electric Stress in The Cable

Optimal radius minimum stress

Grading of Cables

Electric field inside the cable is not uniform, maximum at conductor surface and minimum at the sheath. Thus insulation material is not properly utilized. The insulation near conductor surface is stressed more while there is very less stress at the outer diameter of cable. Grading is used to decrease difference between Emax and Emin. Grading can be broadly classified into two categories.

Capacitance Grading Intersheath Grading

Capacitance Grading

There fore the permittivity is

This can not be realized in practice since it requires infinite number of dielectric materials with varying permittivity In practice, this can be realized by two or three layers of the dielectric materials.

Ideal condition for stress in cable

Capacitance Grading (With Same Safety Factor)

While designing cable


Let dielectric strengths of material is G1 G2 and G3 corresponding to 1, 2, and 3 and F is safety factor same for all materials.

Layer 1 (1)

Layer 1 (2)

Layer 1 (3)

Capacitance Grading (With Same Safety Factor)

Since r < r1<r2 Therefore material having highest product of permittivity and dielectric strength should be kept near to the conductor. The operating voltage of Cable is given by

Capacitance Grading (With Same Maximum Stress)

If the materials are subjected to same maximum stress at the r , r1, and r2

Layer 1 (1)

Layer 1 (2)

Layer 1 (3)

Capacitance Grading (With Same Maximum Stress)

Since r < r1<r2 Therefore same maximum stress material having highest permittivity needs to be kept at surface of conductor.

Capacitance Grading
r = 2.2
r = 4.4 r = 4.4 r = 6.6

Without grading

With capacitance grading

Intersheath Grading

Metal Sheaths having radii r1 and r2 are kept at potential V1 and V2. using auxiliary transformer .

Layer 1 (V)

Layer 1 (V1)

Layer 1 (V2)

Intersheath Grading

Since the material is same, the maximum stress is also same:

0 kV

0 kV 33 kV 66 kV

110 KV

110 KV

Without grading

Intersheath grading

Grading of Cable

Generally not used for following reasons: Non-availability of materials with required varying permittivity materials Change in permittivity with time

Damage of intersheath during cable laying Charging current through the intersheath can damage the cable due to overheating Resonance due to cable capacitance and transformers inductance

Dielectric Losses or Loss Tangent

Power loss in leakage resistance

For small angle From phasor diagram

Therefore, dielectric power loss:

Loss Tangent of Different Materials


Material Impregnated Paper Tan 0.01

Oil filled paper insulation


PVC XLPE

0.004
0.1 0.0004

The loss angle depends on the temperature. Roughly it follows V curve, i.e. Loss angle will be minimum at certain temperature.

Other Topics

Breakdowns in Cable Insulation

Intrinsic Breakdown or puncture: Thermal Breakdown: Tracking:

Sheath and armour losses

HVDC Cables

Current Carrying Capacity:

There is no charging current which will decrease copper losses. Only loss due to leakage current. dielectric hysteresis loss will be zero. No voltage will be induced in sheath hence sheath losses due to induced current will be zero.

Voltage Rating

DC breakdown stress is more than corresponding AC, hence cables can be used for higher DC voltages than AC. Or, for same voltage rating DC cable can have smaller insulation thickness than AC cable.

Underground Cable System

http://www05.abb.com/

You might also like