WELCOME

“DIGISPARK ATTINY85 AND ITS

CAPABILITIES”

Synopsis of Digispark ATTINY 85 And

Its Capabilities :

The Digispark ATTINY85 Mini USB

Development Board is similar to the Arduino
but cheaper and smaller. With a whole host of
shields to extend its functionality and the
ability to use the familiar Arduino IDE, this
board is a great way to jump into
microcontroller electronics.
DR. BABASAHEB AMBEDKAR TECHNOLOGICAL
UNIVERSITY LONERE

Arvind Gavali College Of Engineering, Satara.

Department of Computer Science

Engineering

FY-BTECH 2023-24

(Semester II)

Under Guidance of – Dr. Madhuri More.

 Mr. MORE KISHOR SHAHAJI

1089
 Ms. NIKAM RUCHIRA ASHOK
1090
 Ms. KUMBHAR VAISHNAVI SANJAY
1091
 Mr. MANE ARYAN PRITAM
1092
 Introduction

 The IACS concept is well established. The

IACS concept is well established. Operational
Technology (OT) is used in a variety of
industries, including
production ,Transportation and utilities,
sometimes called cyberphysical (CPS)
systems. Since its first use in 1999, the term
IoT has been used for connected devices in
consumer, domestic, business and industrial
environments. This project is an Internet of Things
(IoT) device development project To realise the
proposed solution, master-slave architecture is
adopted by using a Raspberry Pi computer as master
control board and Digispark ATTINY85 Mini USB
Development Boards as slave devices.
 Justification
 The ATTiny85 USB microcontroller is often chosen for
projects due to its small size, low cost, and integrated USB
functionality, which eliminates the need for an external
USB-to-serial converter.

 Additionally, its low power consumption makes it suitable

for battery-powered applications.

 Despite its compact size, it offers a sufficient number of

I/0 pins and peripherals for many embedded projects,
making it versatile for various applications including DIY
electronics, wearables, and small-scale automotion
 Review of Litreature
Year Author Paper Title Methodology

2016 Nayyar,A. IOT Based Signal conditioners and

And Puri,V. Smart Senser Digital Signal Processor
(DSP) analogue to Digital
converter (ADC)

2019 Angel THINK INDIA A Low-Cost EMG Based

Swastik Journal Human-Computer
Duggal, Interface Peripheral Devi
Dushyant
Kumar
Singh , P.
Raja

1777 Pranay P. A Review on The application based

Gaikwad IOT architecture of IoT is
Jyotsna P. Techniques for explained with their
Gabhane Automating importance and
Devices applications such as sma
homes

2016 Matthys, N., Demonstration The Zero-Configuration

k

Considering the advanced growth rate of IoT technology, researcher predicts

that the shipment of agriculture IoT device will reach 52 million units in 2018 and the
crops production will be increased by 70 percent in the near future (Klubnikin, 2017).
Besides, factories are generating approximate 3.7 trillion economic values from the
implementation of Internet of Things. It is proven that by using IoT technology,
productivity of a business and operational efficiency have greatly improved.
According to experts, industrial IoT will reach 110 billion in the market by 2020
Table 1.2 Comparison between proposed IoT device and other
existing applications
Digispark ATTINY85 Mini USB Development Board

Digispark ATTINY85 Mini USB Development Board is one of the smallest

microcontrollers in the world. This small in size but powerful microcontroller
is integrated with micro-USB socket and an open source bootloader that
allows user to program it easily through a famous integrated development
environment, Arduino IDE, with a USB cable. With a bootloader, Digispark
ATTINY85 Mini USB Development Board is reprogrammable and enables
programmer to flash new program into the development board again and
again. Besides, this development board also has ability to perform
communication with other device through USB. This reduces the messiness of
wires when using GPIO pins to perform similar task.
 Reletead Photos

Digispark ATTINY85 Mini USB Development

Board
 Besides, Digispark ATTINY85 Mini USB
Development Board has ability to integrate with a lot of
electronics. For instance, it even can integrate with an 8-bit
LCD screen by using I2C protocol. In addition, Digispark
ATTINY85 Mini USB Development Board also has GPIO pins
that can be configured to provide pulse-width modulation
which is used to adjust duty cycle of an output signal. For
instance, pulsewidth modulation can be used to adjust the
water output rate of a water pump or control the
brightness of LEDs. It also has a pin that output 5V of
voltage and a Ground pin for electronics connected to it.
Moreover, this development board also can read analog
input from its GPIO pins. This is useful when integrate with
sensor that only provides analog data. In addition, this
development board is cost effective and it is suitable to be
used as slave device in the proposed solution.
 Figure shows the wiring between Digispark ATTINY85
Mini USB Development Board and LDR module. In order to
collect and describe the intensity of light in percentage,
analog output pin of the LDR module is used. The analog
data of the LDR module is connected to pin 2 of the
Digispark ATTINY85 Mini USB Development Board due to
the pin can receive analog input. The analog data is then
being converted into meaningful brightness value based
on the voltage supplied to the LDR module via the
microcontroller‘s power output pin.
LDR Module

Light Dependent Resistor Module (LDR module)

is sensitive to light. It provides its readings based on
the intensity of light. This module output its analog
readings via its analog output pin and it can be
collected by Digispark ATTINY85 Mini USB
Development Board‘s analog input pin. LDR module‘s
power requirement is between 3.3V and 5V, thus it can
be powered by the Digispark ATTINY85 Mini USB
Development Board efficiently and the analog output
of LDR module con be converted into percentage
based on the voltage supplied to it.
Plan of work
 12 January to 30 april 2024 table
format.
 12-31 January Topic decide, research

paper collect.
 1-10 February material and method.
 10-29 February result and discussion.
 1-30 March project performance.
 1-30 April Demonstration of model

ppt.
 presentation and report writing
 1-10 May Research paper publication

on reputed journal
 PROJECT CONCLUSION
Internet of Things technology has brought
countless of benefits for industries as well as enhancing
people‘s daily life. By assigning IP address to sensing
electronics, the readings of sensors are available on the
Internet platform and allowing people to monitor their
IoT solution. Internet of Things in industrial setting
known as Industrial Internet of Things (IIoT) enables an
industry to implement a cyber-physical system that
optimises the manufacturing processes. The impacts of
IIoT are very significant as companies can use IIoT
concept to generate trillions of economic values.

However, some of current existing IoT solutions

are having some issues in terms of user-friendliness
and customisation. After reviewing some of the existing
IoT applications, some of them are lack of plug-and-
play features that provides userfriendliness
characteristic, and some of them are lack of
customisable platforms. IoT applications such as IoT in
a Box offer great user-friendly customisation, but the
applications are not cost effective.
 REFERENCE
[1] Staffová, M.; Kucera, F.; Tochácek, J.; Dzik, P.; Ondreás, F.; Jancár, J. Insight into color change of
reversible thermochromic systems and their incorporation into textile coating. J. Appl. Polymer Sci., 2021,
138 (4), 49724. DOI: 10.1002/app.49724.
[2] Periyasami, A. P.; Vikova, M.; Vik, M. A review of photochromism in textiles and its measurement.
Textile Progress, 2017, 49 (2), 53-136. DOI: 10.1080/00405167.2017.1305833.
[3] Issatayeva, A.; Beisenova, A.; Tosi, D.; Molardi, C. Fiber-optic based smart textiles for real-time
monitoring of breathing rate. Sensors, 2020, 20 (12), 3408. DOI: 10.3390/s20123408.
[4] Tang, S. L. P.; Stylios, G. K. An overview of smart technologies for clothing design and engineering. Int.
J. Clothing Sci. Technol., 2006, 18 (2), 108-128. DOI: 10.1108/09556220610645766.
[5] Trummer, S.; Ehrmann, A.; Büsgen, A. Development of underwear with integrated 12 channel ECG for
men and women. AUTEX Res. J., 2017, 17 (4), 344-349. DOI: 10.1515/aut-2017-0008.
[6] Fafenrot, S.; Silbermann, P.; Grimmelsmann, N.; Assig, J.; Ehrmann, A. Integration of solar cells and
other electronic components into clothes. Kyosev, Y.; Mahltig, B.; Schwarz-Pfeiffer, A. (eds.) Narrow and
Smart Textiles, 2017, 229-239. Springer, Cham. DOI: 10.1007/978-3-319-69050-6_20.
[7] Schwarz, A.; van Langenhove, L.; Guermonprez, P.; Deguillemont, D. A roadmap on smart textiles.
Textile Progress, 2010, 42 (2), 99-180. DOI: 10.1080/00405160903465220.
[8] Catrysse, M.; Puers, R.; Hertleer, C.; van Langenhove, L.; van Egmond, H.; Matthys, D. Towards the
integration of textile sensors in a wireless monitoring suit. Sens. Act. A Phys., 2004, 114 (2-3), 302-311.
DOI: 10.1016/j.sna.2003.10.071.
[9] Langereis, G. R.; Bouwstra, S.; Chen, W. Sensors, actuators and computing systems for smart textiles for
protection. In: Chapman, R. A. (Ed.) Smart textiles for protection, 2013, 190-213. Woodhead Publishing
Series in Textiles. DOI: 10.1533/9780857097620.1.190.
[10] Kaynak, A.; Zolfagharian, A. Functional polymers in sensors and actuators: fabrication and analysis.
Polymers, 2020, 12(7), 1569. DOI: 10.3390/polym12071569.
[11] Jost, K.; Dion, G.; Gogotsi, Y. Textile energy storage in perspective. J. Mater. Chem. A, 2014, 2,
1077610787. DOI: 10.1039/C4TA00203B. [12] Heo, J. S.; Eom, J.; Kim, Y.-H.; Park, S. K. Recent progress of
textile-based wearable electronics: a comprehensive review of materials, devices, and applications. Small,
2018, 14 (3), 1703034. DOI: 10.1002/smll.201703034.
[13] Ehrmann, A.; Blachowicz, T. Recent coating materials for textile-based solar cells. AIMS Mater. Sci.,
2019, 6 (2), 234-251. DOI: 10.3934/matersci.2019.2.234.
[14] Bonderover, E.; Wagner, S. A woven inverter circuit for e-textile applications. IEEE Electron Device
Letters, 2004, 25 (5), 295-297. DOI: 10.1109/LED.2004.826537.
[15] Ojuroye, O.; Torah, R.; Beeby, S. Modified PDMS packaging of sensory e-textile circuit microsystems
for improved robustness with washing. Microsystems Technologies, 2019.
[16] Kiourti, A.; Lee, C.; Volakis, J. L. Fabrication of textile antennas and circuits with 0.1 mm precision. IEEE
Antennas and Wireless Propagation Letters,
[17] Del-Rio-Ruiz, R.; Lopez-arde, J.-M.; Legarda, J. Planar textile off-body communication antennas: a
survey. Electronics, 2019, 8 (6), 714. DOI: 10.3390/electronics8060714.
[18] Schwarz-Pfeiffer, A.; Obermann, M.; Weber, M. O.; Ehrmann, A. Smarten up garments through knitting.
IOP Conf. Series Mater Sci. Eng., 2016, 141, 012008. DOI: 10.1088/1757-899X/141/1/012008.
[19] Coppedè, N.; Giannetto, M.; Villani, M.; Lucchini, V.; Battista, E.; Careri, M.; Zappettini, A. Ion selective
textile organic electrochemical transistor for wearable sweat monitoring. Organic Electronics, 2020, 78,
105579. DOI: 10.1016/j.orgel.2019.105579.
[20] Kim, S. J.; Kim, H. J.; Ahn, J. T.; Hwang, D. K.; Ju, H. S.; Park, M.-C.; Yang, H. C.; Kim, S. H.; Jang, H. W.;
Lim, J. A. A new architecture for fibrous organic transistors based on a double-stranded assembly of
Thank
you