ICT II

Chapter Test
Quarter 2
1. Which Occupational Health and Safety Procedure should
be observed in handling computer components?
• A.Signage of OHS must be followed before and after
hands-on activity.
• B.Personal Protective Equipment should be worn during
the computer disassembly.
• C.Excessive force must NOT apply in attaching the
components to the motherboard.
• D.Parts organizer should be used to segregate the variety
of screws removed from the unit.
2. Which step is applied to manage health and safety at
work?
• A.Check and list down the functionality of the computer
hardware.
• B.Spot, assess and control the hazard to prevent
untoward accidents.
• C.Prepare and check the tools and materials needed in a
certain task.
• D.Medicine kit must be present inside the computer
laboratory.
3. Which risk is obtained after leaving the desktop computer
on for 16 hours?
• A.Leads to data loss if unsaved work is present.
• B.Expose to potential security threats, including malware,
viruses, or unauthorized access.
• C.Keeping a computer running for an extended period
contributes to higher energy consumption.
• D.Leads to overheating, potentially causing damage to
internal components like the CPU or graphics card.
4. Forms are used to give specific details to the accidents
that happened in the computer laboratory, which is NOT
included in the accident report?
• A.Date and time of the accidents.
• B.Type of injury and first aid given.
• C.Action taken to prevent further injury.
• Name of the person responsible for the accident.
5. Which fire safety procedure is NOT applicable in a computer
laboratory?
• A.Conduct fire drills to ensure familiarity with evacuation
procedures.
• B.Display emergency contact information of local fire
department.
• C.Train someone to use a fire extinguisher, who in the event of
fire will take charge.
• D.Follow designated evacuation routes and assemble at
predetermined assembly points.
6. Which electronic device is used for storing and
processing data?

• A.Calculator C. Computer
• B.Cellphone D. Radio
7. Which classification of computer is used for bulk data
processing?

• A.Digital C. Mainframe
• B.Server D. Minicomputer
8. Which statement BEST describes a tablet?
• A.It is intended to be used in a single location.
• B.It is often used to study the behavior of human health.
• C.They had a smaller feature set than a regular laptop.
• D.They use a touch screen technology that can be used
with a stylus pen.
9. Which BEST describes the characteristics of an
Application Software?
• A.They are Debuggers, drivers, and assemblers.
• B.It only needs 1 application per computer.
• C.It cannot run without the presence of system software.
• D.They are web browsers, spreadsheet software and
Linux.
10. Which printed circuit board enables the computer to use
a peripheral device?
• A.Adapter C. Optical drive
• B.Floppy disk D. CD-ROM
11. Which statement BEST describes a ROM?

A. A non-volatile computer storage used in computers.

B. A compact disc used as a read-only optical memory
device for a computer system.
C. An internal or external computer disk drive that uses
laser beam technology to read and write data.
D. It is where the data is stored that the computer processor
needs to run the applications and open files in the
computer.
12. Which component is used as a permanent storage for
data, and it is configured as C: drive and holds the
operating and application software?

• A.Hard disc drive C. Read only memory

• B.Solid state drives D. Random access memory
13. Which statement is CORRECT about the system unit?

• A.It is the main brain of a computer system.

• B.It is the main part of a computer that is sometimes
called a chassis.
• C.It is the computer's working storage space that holds
data and instructions.
• D.It is a data pathway between several hardware
components inside or outside a computer.
14. Which statement BEST describes a storage device?

• A.It is a type of memory that is volatile.

• B.It is a type of memory that is non-volatile.
• C.It is a device that is used for recording data in a
permanent or semi-permanent form.
• D.It can read text and illustrations printed on paper and
translate the information into a form the computer can
use.
15. Which peripheral is NOT considered as an input
device?

• A.Joystick C. Scanner
• B.Microphone D. Speakers
16. Which is TRUE about monitors?

• I.It uses a cathode ray tube.

• II.It is used as an audio-input device.
• III.It is the most significant output device.
• IV.It is a device for reading printed bar codes.

• A.I and II C. I, II and III

• I and III D. I, II, III, and IV
17. Which BEST describes a network interface?
• A.It protects a computer network from unauthorized
access.
• B.It is a part of the main circuit board in some computers
or printers.
• C.It connects client computer, server, printer, or another
component to a network.
• D.It consists of a small electronic circuit board that is
inserted into a slot inside a computer or printer.
18. Which is/are the common type of network devices?
• I.Hubs III. Routers
• II.Repeaters IV. Switches

• A.I and II C. I, II,III, and IV

• B.I, II, and III D. II, III, IV
19. Which tool is used for holding, bending, and stretching
the lead electronic component or connecting wire?

• A.LAN tester C. Flat screwdriver

• B.Long nose plier D. Anti-static wrist wrap
20. Which equipment is use as a connector at the back of a
computer or other device?

• A.Port C. Server
• B.USB D. LAN Card
21. What is the primary purpose of understanding and
addressing computer system errors? To ______.

• A. create more errors

• B. slow down the computer
• C. increase hardware costs
• D. enhance system security
22. What is a common cause of the "division by zero" error?

• A. Logical error C. Syntax mistake

• B. Runtime issue D. Hardware failure
23. How can you troubleshoot a computer system that is
overheating?

• A. Install more software.

• B. Cover the computer with a blanket.
• C. Ignore the issue and continue using the computer.
• D. Check for dust buildup, ensure proper airflow, and
consider using a cooling pad or adjusting power settings.
24. Which tool is commonly used for viewing system logs to
identify error messages?

• A. Event Viewer
• B. Disk Cleanup
• C. Task Manager
• D. System Configuration
25. When troubleshooting software conflicts, what is the
recommended approach to identify the problematic
software?

• A. Disable antivirus software.

• B. Update all installed software.
• C. Use a process of elimination.
• D. Reinstall the operating system.