Compression
Compression
Release – how quickly after the signal drops below the threshold the
compressor stops.
Knee – sets how the compressor reacts to signals once the threshold
is passed. Hard Knee settings mean it clamps the signal straight
away, and Soft Knee means the compression kicks in more gently as
the signal goes further past the threshold.
Output – allows you to boost or decrease the level of the signal output
from the compressor.
Release
Attack
Output
Threshold
Ratio Make-Up Gain
Knee
Timeline of Compression
• 1930s-40s – Compression created to control volume of
TV/Radio presenters whispering/talking quietly as-well as an
entire audience clapping.
No. 9: Louder music, even if it’s just slightly louder, almost always sounds better than
quieter music.
No. 8: Most music is listened to in the background to accompany some other activity like
working, reading exercising, driving, or cooking. When you’re doing something else,
uncompressed music’s constantly shifting volume level would be an annoyance.
No. 7: When listening in shuffle mode, there’s a good chance you’ll skip over the quieter
songs to get to the next tune. Record producers live in fear of a mix that’s too quiet.
No. 6: In the days before CD mastering, engineers needed to boost the quietest sounds
to keep them above the LP’s noise floor, and reduce the loudest sounds volume level to
keep the “needle” in the groove. Digital didn’t have those problems, but we still wound up
with CDs that have less soft-to-loud dynamic range than LPs.
No. 5: Engineers like using different types of compression to create
new sounds to catch the ear. There’s nothing wrong with that.