Scribd Logo
Upload

Welcome to Scribd!

  • 10 views

    20018-C-004 (A.MEGHANA) Final

    Uploaded by

    vajeedofficial
    The document summarizes the construction process of cement concrete (CC) roads under a municipality department. It details the 11 sites where CC road construction took place, totaling over 1000 meters in length. The key steps included: 1) site clearance and preparation of the subgrade and sub-base, 2) placing forms and mixing concrete using a specific ratio of cement, fine aggregate, and coarse aggregate, 3) compacting and curing the concrete for 28 days, and 4) opening the roads to traffic once curing was complete. The trainee gained practical experience and knowledge in constructing CC roads through this industrial training program.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    20018-C-004 (A.MEGHANA) Final

    Uploaded by

    vajeedofficial
    10 views22 pages
    The document summarizes the construction process of cement concrete (CC) roads under a municipality department. It details the 11 sites where CC road construction took place, totaling over 1000 meters in length. The key steps included: 1) site clearance and preparation of the subgrade and sub-base, 2) placing forms and mixing concrete using a specific ratio of cement, fine aggregate, and coarse aggregate, 3) compacting and curing the concrete for 28 days, and 4) opening the roads to traffic once curing was complete. The trainee gained practical experience and knowledge in constructing CC roads through this industrial training program.

    Original Title

    20018-C-004 (A.MEGHANA) final (2)

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the construction process of cement concrete (CC) roads under a municipality department. It details the 11 sites where CC road construction took place, totaling over 1000 meters in length. The key steps included: 1) site clearance and preparation of the subgrade and sub-base, 2) placing forms and mixing concrete using a specific ratio of cement, fine aggregate, and coarse aggregate, 3) compacting and curing the concrete for 28 days, and 4) opening the roads to traffic once curing was complete. The trainee gained practical experience and knowledge in constructing CC roads through this industrial training program.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    10 views22 pages

    20018-C-004 (A.MEGHANA) Final

    Uploaded by

    vajeedofficial
    The document summarizes the construction process of cement concrete (CC) roads under a municipality department. It details the 11 sites where CC road construction took place, totaling over 1000 meters in length. The key steps included: 1) site clearance and preparation of the subgrade and sub-base, 2) placing forms and mixing concrete using a specific ratio of cement, fine aggregate, and coarse aggregate, 3) compacting and curing the concrete for 28 days, and 4) opening the roads to traffic once curing was complete. The trainee gained practical experience and knowledge in constructing CC roads through this industrial training program.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 22

    INDUSTRIAL TRAINING

    ON
    “CONSTRUCTION OF C.C ROADS”
    (Under Municipality Department, Punganur)

    Presented
    by
    A.MEGHANA
    20018-C-004

    Internal Guide Training Incharge


    Smt.C. Gowri Sri.P.S MAHESH garu.
    Lecturer Deputy Executive Engineer
    Muncipality Department
    The following works are comes under municipal
    Department;
    Municipal roads and water drainage.
    Urban planning including town planning.
    Water supply for commercial purpose.
    Public health, sanitation.
    Street lighting.
    Under municipality, I worked on construction of
    CC roads and CC drains.
    CC ROAD
    SITE DETAILS
    S NO PLACE NAME LENGTH BREADTH
    1 BHAGATH SINGH 92.00 m 4.5 m
    COLONY

    2 MELUPATLA 97.00 m 4.5 m


    3 NEAR INDIAN BANK 45.00 m 4.5 m
    4 NEAR MARKET YARD 60.00 m 3.5 m
    5 KONETIPALEM 75.00 m 4.00 m
    6 SUBEDARA STREET 55.00 m 3.5 m
    7 THATIMAKULAPALEM 45.00 m 3.00 m
    8 MANGALAM COLONY 80.00 m 4.5 m
    9 KONETIPALEM 60.00 m 3.00 m
    10 KOTHAPET 210.00 m 4.5 m
    11 POLICE LINE STREET 60.00 m 3.5 m
    CONTENTS
    INTRODUCTION
    MATERIALS
    MACHINERY
    CONSTRUCTION PROCEDURE
    CONCLUSION
    INTRODUCTION
    ROADS
    The routes or path being at one destination and lead to
    another.
    Road is an open, generally public way for the passage
    of vehicles, people, and animals.(village Road)
    MATERIALS
     Cement:
    • A cement is a binder used in construction.
    • At site OPC 43 Grade used.
    Sand:
    • The aggregates which pass through IS sieve 4.75 mm is called Fine
    aggregate .
    • Source : Cheyeru river, Rajampeta to site .
    Coarse aggregate :
    • The aggregates which retain on mm IS sieve 4.75 mm is called coarse
    aggregate .At Some sites 40mm & 20 mm Size HBG metal used
    • CC(1:4:8) & CC(1:2:4)
     Water: Potable water is used for mixing and curing of concrete.
    MACHINERY
    Weigh batching plant : To weigh the ingredients of concrete.
    Concrete Mixer: To Mix the ingredients of concrete.
    Needle Vibrator: To vibrate and proper compaction. 40mm or
    60mm needle vibrator used.
    Trowels : It is used for adjusting and spreading the concrete.
    Wooden/ metal : To spread concrete and removing excess
    height of concrete.
    Surface vibrator : To vibrate and remove voids.
    Machineries
    AJAX FERARI: Which
    mixes and transports the
    concrete

    Concrete mixer
    MELUPATLA SITE:

     I am presenting on melupatla site.

     The length of the road is 97.00 m.

     The width of the road is 4.5 m.

     The thickness of the road is 0.2m.

     The Estimated cost of the road is Rs.7.60 lakhs.


    CONSTRUCTION PROCEDURE
     SITE CLEARENCE
     PREPARATION OF SUBGRADE
     PREPARATION OF SUB BASE
     PLACING OF FORMS
     BATCHING OF MATERIALS & MIXING
     TRANSPORTING & PLACING OF CONCRETE
     COMPACTION
     CURING
     OPENING TO TRAFFIC
    SITE CLEARENCE

    •Removal of Unwanted
    plants .
    • Disposing of all
    unsuitable materials
    such as trees,bushes,
    shrubs, and top Organic
    soils up to a minimum
    depth of 4”.
    PREPARATION OF SUBGRADE.

    •The subgrade course is


    typically the natural soil.
    • After cleaning ,it is
    prepared to the required
    grade and profile,
    that is 4 inches.
    PREPARATION OF SUB BASE
    When natural sub-
    grade is not very firm,
    a sub-base over the
    subgrade .
    The thickness of the
    Sub-base is 0.1 m.
    PLACING OF FORMS
    The forms are made
    up of Steel or
    timber.
    The depth of the
    steel sections is
    equal to thickness of
    the road that is 4
    inches.
    BATCHING OF MATERIALS & MIXING
    The materials used
    Cement ,Fine & Coarse
    aggregates, and water
    with weigh batch
    CC(1:1 1/2:3)-M25 Grade
    Mixing is Done for
    Two minutes until
    Homogeneous mixture.
    TRANSPORTING AND PLACING OF CONCRETE
    Transferring of concrete from mixing plant to
    construction site by chute and placed it ,spread on
    subsurface with required thickness that is 4 inches
    .
    COMPACTION

    Packs the aggregate


    particles
    together so as to increase the
    density of concrete.
    • The Surface is finished with
    Wooden tamper.
    • It increases the strength of
    Concrete.
    CURING
    • For hardening of concrete ,and to achieve strength
    oit is cured by ponding method regularly for about
    28 days.
    OPENING TO TRAFFIC
     After completion of curing the road is open to
    traffic.
    CONCLUSION
    I learnt How the Construction of CC Roads Undergoes.
    I can conclude that there is difference between theoretical
    and practical work. The scope of understanding will be more
    when practical work is done.
    I got more knowledge and experience by doing
    practical work.
    I have successfully completed the Industrial
    Training by the guidance of Internal & External guides.
    Thank
    you

    You might also like