PPP-Eclipse-E05 Module 05 IDUs

ECLIPSE TERMINALS
Company Confidential 1
Eclipse Terminals
• Eclipse Terminals are single-link devices.
Each comprises an IDU & ODU
• IDUs have no plug-in modules; different

versions support different customer
interfaces: E1, Ethernet, SDH
• Compatible with ODU300 range
• Terminals may be operated as single links, or networked where IDUs are

back-to-back connected via their tributary ports at intermediate sites
• Most Terminals can be paired for protected link operation
• Except for the IDU ES, IDU GE and IDU 300 20xV2, Terminals are not
capacity licensed
• All are 1RU
2 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

Eclipse PDH & SDH Terminals:
By Application
300 Series
Application Variant Capacities Modulation Protection
E1 IDU 300 8x 4x, 5x, 8x E1 QPSK or 16QAM HS
IDU 300 20x 4x, 5x, 8x, 10x, 16x 20x E1 QPSK or 16QAM HS
IDU 300 20xV2 5 x E1 to 40 x E1 QPSK to 128QAM HS, SD
IDUsp 4x 4 x E1 QPSK None

IDUsp 16x 4x, 8x, 16x E1 QPSK HS
STM1 IDU 155o STM1/OC3 16/64/128QAM HS, SD
(Optical SC interface)
Ethernet IDU ES Up to 200Mbps + 8 E1 QPSK to 128QAM None
IDU GE 20x Up to 360Mbps QPSK to 128QAM HS

Up to 20E1
HS = Hot-standby
SD = Space diversity

IDU 300 20x & IDU 300 8x
IDU 300 20X

IDU 300 20x: 4x, 5x, 8x, 10x, 16x, 20x E1, QPSK or 16QAM
IDU 300 8x: 4x, 5x, 8x E1, QPSK or 16QAM
Tributaries on individual RJ-45 connectors & software configured for E1
Includes auxiliary data (synchronous 64 kbps or asynchronous to 19.2 kbps)

and alarm I/O options
May be paired to support 1+1 hot-standby operation with Y cables used to

provide single-point Tx & Rx tributary connections. Tx & Rx switching is not
hitless
Supports ODU 300ep, ODU 300hp or ODU 300sp

IDU 300 20xV2
Supports up to 20xE1 tributaries on individual RJ-45 connectors
Modulation options to 16QAM
Capacities to 20 x E1 for single link non-protected operation
Capacities to 40 x E1 for hot-standby or space diversity operation

• IDUs are paired for protected/diversity operation
• For capacities to 20 x E1 normal IDU equipment & path protection
applies, with Y cables used on the tribs
• For higher capacities traffic from the standby IDU is routed to the online
IDU to support termination of up to 40 x E1 tribs. In this configuration trib
& PSU protection is not supported, however RAC/ODU & path protection
functions are retained

IDU 300 20xV2
Contd
40x E1 operation is licensed – requires an upgrade from the

base license
Tx switching is not hitless
Rx switching (voting) is hitless (errorless)
Synchronous or asynchronous auxiliary data & alarm I/O

options are included
Requires ODU 300ep, ODU 300hp, or ODU 300sp

IDUsp 16x and IDUsp 4x
IDUsp 16x
IDUsp 16x and 4x are cost optimized for basic E1 services:
• IDUsp 4x: 4x E1 with QPSK modulation
• IDUsp 16x: 4x, 8x, 16x E1 with QPSK modulation
Paired 300sp 16x IDUs support hot-standby operation; Tx and Rx switching is

not hitless. The IDUsp 4x is not protectable
A single 64 kb synchronous auxiliary data connection is provided; there is no

alarm I/O
IDUsp requires an ODU 300sp; the ODU 300ep & ODU 300hp are not
supported
NMS connection is Ethernet-only; there is no serial interface for Portal PC

connection

IDU 155o
IDU 155o supports a one 155 Mbps STM1 tributary on single-mode optical SC
connectors
Modulation options are 16, 64 or 128 QAM
IDUs are paired to support hot-standby or space diversity operation - optical Y

cables provide a single Tx and Rx interface
• Rx path switching (voting) is hitless. Tx switching is not hitless.
Auxiliary data (synchronous 64 kbps or asynchronous to 19.2 kbps) & alarm I/O
options are included
Supports ODU 300ep or ODU 300hp

IDU ES: Fast Ethernet
Ethernet to 200 Mbps with up to 8x E1 wayside trib circuits
Marketed by Harris-Stratex Networks as the Connect ES link package

comprising 2x IDU ES, and 2x ODU 300
Includes a Layer 2 switch to support four customer 10/100base-T ports, two

over-air transport channels and comprehensive QoS policing & prioritization
options
Functionality is similar to DAC ES for Ethernet, and DAC 16x for E1 Capacity is
licensed - base license supports 50 Mbps - licensed steps to 80, 100, 150 or
200 Mbps
Can be over-air interfaced to Eclipse Node
Auxiliary data and alarm I/O options included
Supports ODU 300ep, ODU 300hp or ODU 300sp

IDU GE: Gigabit Ethernet
Ethernet to 360 Mbps with up to 20x E1 wayside trib circuits
Includes a Layer 2 switch to support three customer 10/100/1000base-T plus

one 1000Base-X ports, two over-air transport channels and
comprehensive QoS policing & prioritization options
Ring protection using HSTX RWPRTM
Functionality is similar to DAC GE for Ethernet, and DAC 16x for E1
Can be over-air interfaced to Eclipse Node & IDU ES
Auxiliary data & alarm I/O options included
Supports ODU 300ep, ODU 300hp, or ODU 300sp

IDU GE 20x (cont.)

PPP-Eclipse-E05 Module 05 IDUs

Uploaded by

Copyright:

Available Formats

PPP-Eclipse-E05 Module 05 IDUs

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

PPP-Eclipse-E05 Module 05 IDUs

Uploaded by

Copyright:

Available Formats

ECLIPSE TERMINALS

• IDUs have no plug-in modules; different

• Compatible with ODU300 range

• Terminals may be operated as single links, or networked where IDUs are

• Most Terminals can be paired for protected link operation

• All are 1RU

2 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

E1 IDU 300 8x 4x, 5x, 8x E1 QPSK or 16QAM HS

IDU 300 20xV2 5 x E1 to 40 x E1 QPSK to 128QAM HS, SD

IDUsp 4x 4 x E1 QPSK None

Ethernet IDU ES Up to 200Mbps + 8 E1 QPSK to 128QAM None

IDU GE 20x Up to 360Mbps QPSK to 128QAM HS

3 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

IDU 300 20X

IDU 300 8x: 4x, 5x, 8x E1, QPSK or 16QAM

Tributaries on individual RJ-45 connectors & software configured for E1

Includes auxiliary data (synchronous 64 kbps or asynchronous to 19.2 kbps)

May be paired to support 1+1 hot-standby operation with Y cables used to

Supports ODU 300ep, ODU 300hp or ODU 300sp

4 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

Supports up to 20xE1 tributaries on individual RJ-45 connectors

Modulation options to 16QAM

Capacities to 20 x E1 for single link non-protected operation

Capacities to 40 x E1 for hot-standby or space diversity operation

5 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

40x E1 operation is licensed – requires an upgrade from the

Tx switching is not hitless

Rx switching (voting) is hitless (errorless)

Synchronous or asynchronous auxiliary data & alarm I/O

Requires ODU 300ep, ODU 300hp, or ODU 300sp

6 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

Paired 300sp 16x IDUs support hot-standby operation; Tx and Rx switching is

A single 64 kb synchronous auxiliary data connection is provided; there is no

NMS connection is Ethernet-only; there is no serial interface for Portal PC

7 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

Modulation options are 16, 64 or 128 QAM

IDUs are paired to support hot-standby or space diversity operation - optical Y

Supports ODU 300ep or ODU 300hp

8 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

Ethernet to 200 Mbps with up to 8x E1 wayside trib circuits

Marketed by Harris-Stratex Networks as the Connect ES link package

Includes a Layer 2 switch to support four customer 10/100base-T ports, two

Can be over-air interfaced to Eclipse Node

Auxiliary data and alarm I/O options included

Supports ODU 300ep, ODU 300hp or ODU 300sp

Ethernet to 360 Mbps with up to 20x E1 wayside trib circuits

Includes a Layer 2 switch to support three customer 10/100/1000base-T plus

Functionality is similar to DAC GE for Ethernet, and DAC 16x for E1

Can be over-air interfaced to Eclipse Node & IDU ES

Auxiliary data & alarm I/O options included

Supports ODU 300ep, ODU 300hp, or ODU 300sp

10 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

11 AVIAT NETWORKS | JANUARY 28, 2010 Company Confidential

You might also like