Traps and Pots2

Pots and traps are generally rigid structures into which fish or shellfish are guided or enticed
through funnels that make entry easy but from which escape is difficult. There are many different
styles and designs, each one has been designed to suit the behaviour of its target species. Many
designs have evolved over many years to suit the coastline and seabed where it is used only
changing to make use of modern materials.
In certain circumstances there may well be instances of Ghost fishing of lost pots and traps but this
can be minimised by using appropriate gear and release devices. One of the main causes of gear
losses is the interaction of mobile gear with static gear. Nowadays the instances of this should be
fewer due to the improvements in communication between different commercial fishing sectors and
the ability to accurately monitor gear placement using GPS systems.
By-catch is minimal and usually confined to small animals of the target species. This can be
minimised by the use of appropriate mesh sizes in the cover netting and the use of relevant
escape gaps. Any by-catch in the pots can be easily removed from the trap and released back
into the sea immediately without harm.
Seabed impact with pots and traps is limited to light contact of the traps and minimal
penetration of the seabed from the small anchors or weights that are used at the ends of the
fleets of some gears. There may be some movement of the gear and the ropes on the seabed
particularly in poor weather but this will not have much effect on the seabed.
Traps, in various forms of cages or baskets, have been used throughout the world for thousands of years to
catch a wide variety of fish and shellfish. The basic design has not changed much over the years; the major
changes have been in the materials that are used to make the gear. Early gear would have been made with
wicker or willow, woven into a basket-form with a tapered entrance in the top, and stones inside to weight
them down on the seabed. Nowadays, the pots and traps are made, along similar lines to the old wicker
ones, but using modern materials such as wood, steel, plastic, etc. for the frame; this being covered with
nylon and polyethylene netting.
Modern pots and traps tend to differ in shape, size and construction materials according to the behaviour of the
target species, and local fishing practices. However, they will all be similar in that they will have at least one
tapered entrance that makes it easy for the shellfish to enter, but very difficult for them to find their way out
again. There is a big variation in the names of the different traps in different fisheries, with them being referred to
most commonly as pots, creels, traps - but there will be numerous different local names for the different styles of
pot. The pots are baited, usually with some type of fish. As with the pot construction, the choice of bait varies
greatly with the locality and the target species, with some baits proving much more suitable for certain species
than others. Despite this, it often comes down to what type of bait is readily available, and at a reasonable price.
The traps can either by shot individually or more commonly in strings (fleets), where a number of pots
are attached to one long rope and laid on the seabed, with a dhan or bouy to mark the location of each
end of the fleet. If the pots are very light weight, as in Nephrops creels, an anchor or weight may be
added at both ends of the fleet.
The number of pots in a fleet depends on many factors, such as the type of pot used, the target
species, the size and design of vessel, the area they are shot in, the type of seabed, and the personal
preference of the skipper and crew.
The numbers in a fleet can vary from five in some inshore lobster fisheries to over 100 in offshore crab
fisheries and Nephrops fisheries. The pots are baited and shot away from the vessel as it steams slowly
ahead and, are left on the seabed to fish for a period of, usually, 24 hours. If left much more than
overnight, there can be a tendency for some of the shellfish that are already in the traps to escape,
thereby creating a loss of revenue for the vessel. The pots are hauled by firstly picking up the dhan at the
end of the fleet of pots and leading the rope to the creel hauler. The hauler is usually mounted forward, to
one side of the vessel. As the pots are hauled up to the vessel, the creel hauler will be slowed down as the
pots approach the vessel side. They will then be hauled, or manhandled, over the side of the vessel and
onto a flat working table where the catch is removed and placed in a container for onboard sorting and
processing before storage.
As the catch is being taken out of the trap, any by-catch or undersized crabs and lobster will be
immediately returned to the sea and the traps will be re-baited. The re-baited pots are passed across
the deck and stowed in correct order so that they are all ready to be shot away again. In the
meantime, the hauler will have been engaged again to haul in the rope until the next pot is at the side
of the vessel, and the whole process is repeated and continues like this until the whole fleet is
onboard the vessel. The skipper will manoeuvre the vessel into position and start to shoot the fleet
again. This is usually done by shooting away the dhan and rope and probably manhandling the first
trap into the water. After this, the rest of the fleet should be ‘towed of the stern of the boat in turn as
each length of rope comes tight. However, if there has not been a good catch the skipper may opt to
keep the fleet onboard and move fishing grounds a short way in an attempt to improve the next day’s
catch. This routine and layout is fairly standard on all UK vessels, and many overseas vessels fishing
with traps and pots.
All sizes of vessels can fish with traps, with small inshore open boats often operating with a few traps shot
individually instead of in fleets and hauled by hand, right up to 20 – 30 metre vessels operating several thousand
pots in fleets of around 100. The smaller vessels will store their catch in boxes and land them daily, or put them into
storage cages left underwater until the shellfish buyer is in port to collect them. The larger vessels will store their
catch in vivier tanks to keep them alive onboard the vessel and land their catch after several days of fishing. A vivier
tank is a tank built into the hull of the vessel with a pump system to circulate fresh seawater to keep the animals
alive. Once put ashore, many shellfish buyers will transport the catch in lorries fitted with vivier tanks to ensure the
shellfish are still alive and fresh when they reach the end user.

Traps and Pots2

Uploaded by

Copyright:

Available Formats

Traps and Pots2

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Traps and Pots2

Uploaded by

Copyright:

Available Formats

Pots and traps are generally rigid structures into which fish or shellfish are guided or enticed

You might also like