Ohm's Law

Ohm’s Law
Ohm’s Law The mathematical relationship between

voltage, current, and resistance was
discovered in 1826 by Georg Simon Ohm.
The relationship, known as Ohm’s law, is

the basic foundation for all circuit
analysis in electronics.
Ohm’s law,states that the amount of

current, I, is directly proportional to the
voltage, V, and inversely proportional to
the resistance, R.
Ohm’s Law Power can be defined as the time rate of
doing work. The symbol for power is P
and the unit is the watt.
The Current I = V/R
Ohm’s Law If we keep the same resistance in a
circuit but vary the voltage, the current
will vary.The applied voltage V can be
varied from 0 to 12 V.
The bulb has a 12-V filament, which

requires this much voltage for its normal
current to light with normal intensity.
The meter I indicates the amount of

current in the circuit for the bulb.
Ohm’s Law With 12 V applied, the bulb lights,
indicating normal current. When V is
reduced to 10 V, there is less light
because of less I.
As V decreases, the bulb becomes

dimmer.
The changing brilliance of the bulb shows

that the current varies with the changes in
applied voltage.
Ohm’s Law It is important to realize that with high
voltage, the current can have a low value
when there is a very high resistance in the
High Voltage but Low circuit.
Current For example, 1000 V applied across
1,000,000 ohms results in a current of only
0.001A. By Ohm’s law,
Ohm’s Law The practical fact is that high-voltage
circuits usually do have small values of
current in electronic equipment.
High Voltage but Low Otherwise, tremendous amounts of power
Current would be necessary.
Ohm’s Law A low value of voltage in a very low
resistance circuit can produce a very high
current.
Low Voltage but High
6-V battery connected across a resistance
Current of 0.01 ohms produces 600 A of current:
Ohm’s Law Example 2-1
A heater with a resistance of 8 ohms is

Less I with More R connected across the 120-V power line.
How much is the current I?
A small lightbulb with a resistance of

Less I with More R 2400 ohms is connected across the same
120-V power line. How much is current
I?
Ohm’s Law Transistors and integrated circuits
generally operate with a DC supply of 5, 6,
9, 12, 15, 24, or 50 V. The current is
Typical V and I usually in millionths or thousandths of
one ampere up to about 5 A.
The Voltage V = IR
Ohm’s Law The voltage across R must be the same as
the source V because the resistance is
connected directly across the battery.
The numerical value of this V is equal to

the product I x R.
V = 2 A x 3 ohms, which equals the 6 V of

the applied voltage.
If a 12-ohm resistor is carrying a current

of 2.5 A, how much is its voltage?
Ohm’s Law Besides the numerical calculations
possible with the IR formula, it is useful to
consider that the IR product means
voltage.
Whenever there is current through a

resistance, it must have a potential
difference across its two ends equal to
the IR product.
If there were no potential difference, no

electrons could flow to produce the
current.
The Resistance R = V/I
Ohm’s Law As the third and final version of Ohm’s
law, the three factors V, I, and R are related
by the formula
Whenever V and I are known, the

resistance can be calculated as the voltage
across R divided by the current through
it.
Ohm’s Law Physically, a resistance can be considered
some material whose elements have an
atomic structure that allows free electrons
to drift through it with more or less
force applied.
Electrically, though, a more practical way

of considering resistance is simply as a
V/I ratio.
Ohm’s Law Anything that allows 1 A of current with
10 V applied has a resistance of 10 ohms.
This V/I ratio of 10 V is its characteristic.
If the voltage is doubled to 20 V, the

current will also double to 2 A, providing
the same V/I ratio of a 10-ohm resistance.
Ohm’s Law We do not need to know the physical
construction of a resistance to analyze its
effect in a circuit, so long as we know its
V/I ratio.
Ohm’s Law For instance, a box with some unknown
material in it is connected in a circuit
where we can measure the 12 V applied
across the box and the 3 A of current
through it.
The resistance is 12V/3A, or 4 ohms.

How much is the resistance of a light

bulb if it draws 0.16 A from a 12-V
battery?

Ohm's Law

Uploaded by

Copyright:

Available Formats

Ohm's Law

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Ohm's Law

Uploaded by

Copyright:

Available Formats

Ohm’s Law

Ohm’s Law The mathematical relationship between

The relationship, known as Ohm’s law, is

Ohm’s law,states that the amount of

The bulb has a 12-V filament, which

The meter I indicates the amount of

As V decreases, the bulb becomes

The changing brilliance of the bulb shows

A heater with a resistance of 8 ohms is

A small lightbulb with a resistance of

The numerical value of this V is equal to

V = 2 A x 3 ohms, which equals the 6 V of

If a 12-ohm resistor is carrying a current

Whenever there is current through a

If there were no potential difference, no

Whenever V and I are known, the

Electrically, though, a more practical way

This V/I ratio of 10 V is its characteristic.

If the voltage is doubled to 20 V, the

The resistance is 12V/3A, or 4 ohms.

How much is the resistance of a light

You might also like