CONTENT

 INTRODUCTION
 WHAT IS SOLAR TRACKERS
 NEED OF SOLAR TRACKERS
 TYPES OF SOLAR TRACKERS
 INTERNAL BIOCK DIAGREM
 WORKING PRINCIPLE
 HARDWARE COPONENTS OF SOLAR TRACKER
 COMPARISON OF STATIONARY VS TRACKED SOLAR
ENERGY
 ADVANTAGES
 DISADVANTAGES
 CONCLUTION
 REFERENCE
1
 INTRODUCTION
 Renewable energy solutions are becoming popular.

 Maximizing output from solar system increases efficiency.

 Presently solar panels are of fixed type which lower the efficiency.

 Maintaining vertical direction between light and panel maximizes

efficiency.
 Solar tracking system has 35% higher generating power than
fixed.
 Solar tracking system based on PLC can adjust automatically

orientation of panel

2
 WHAT IS SOLAR TRACKER?

A Solar tracker is a
used device for orienting a solar
photovoltaic panel or lens towards
the sun by using the solar or light
sensors connected with the
machine ( ex: stepper motor, servo
motor, gas filled piston ).

Fig:1 4
 NEED OF SOLAR TRACKER
 Increase Solar Panel Output

 Max.efficency of the panel

 Maximize Power per unit Area

 Able to grab the energy through out the day

Fig:2 5
 TYPES OF SOLAR TRACKERS
Single axis trackers
 Single axis solar trackers can either have a horizontal or a vertical
axle.

Fig:3 Fig:4 6
Dual Axis Trackers
 Double axis solar trackers have both a horizontal and
vertical
axis
 It can track the Sun's apparent motion exactly anywhere
in the world.

Fig:5
7
OVERVIEW OF PRESENT
TRACKER DRIVE TYPES

Fig:6 8
 1. PASSIVE (GAS) TRACKERS

 Passive trackers use a compressed

gas fluid in two canisters .
 The mechanism is in such a way
that if one side cylinder is heated
other side piston rises causing the
panel to tilt over the sunny side.

Fig:7 9
 2. ACTIVE TRACKERS

 measure the light intensity from

the sun by using light sensors
 And determine where the solar
modules should be pointing

Fig:9
9
 3. OPEN LOOP
SOLAR

TRACKERS
Open loop trackers determine the
position of the sun using computer
controlled algorithms or simple timing
systems.
1. Timed Trackers
A timer is used to move the
tracker across the sky.
2. Altitude / Azimuth Trackers
It uses the astronomical data or
sun position algorithms to determine the
position of sun for any given time and
location by using PLC
Fig:9
10
BLOCK DIAGRAM

Fig:10

11
 WORKING PRINCIPLE
 Auto-tracking control system composed of PLC, sensors, signal
processing units, PV cells, electromagnetic and mechanical motion
control modules and power supply systems.
 Panel detects the sun light strength to sensors
 The sensors output is given to the PLC which compares it and
produces an equivalent output so as to rotate the motor and align
the panel in the direction of sun

12
HARDWARE COMPONENTS

 SOLAR PANEL
 LDR SENSORS
 STEPPER MOTOR
 RELAY
 PLC

13
 SOLAR PANEL
 Its made up of a number of solar cells connected in series internally
 Convert solar energy to electricity.
 Based on photo voltaic effect.
 Photo voltaic effect produces a change in electrical
characteristics when light is incident upon it.

Fig:11
14
 LDR SENSORS
 A high resistance semiconductor whose resistance decreases with
increasing incident light intensity.
 When light falls on such a semiconductor, the valence electrons
receive the light energy incident and jump to the conduction band.
 The conductivity of the device increases, decreasing its resistivity.

Fig:12

15
 STEPPER MOTOR
 Its an electromechanical device which converts digital pulse inputs
to incremental shaft rotation.
 Used for precision positioning control applications.
 Its controlled by a series of electromagnetic coils.

Fig:13 Fig:14 Fig:15

16
 RELAY
 Its an electrically operated switch used for switching of
large currents.
 Uses an electromagnet to operate a switching
mechanism mechanically

Fig:16 Fig:17 18
 PROGRAMMABLE
LOGIC CONTROLLER(PLC)

Fig:18
18
C0MPARISON OF SOLAR
ENERGY

Fig:19
19
 ADVANTAGES
 Simple
 Low cost
 Eco-Friendly
 We can monitor directly using PC
 Tracking accuracy is more
 Reduce the usage of power from power grid

20
 DISADVANTAGES
 Solar electricity is not available at night and is less available in
cloudy weather conditions. Therefore, a storage or complimentary
power system is required.
 Limited power density.
 Solar cells produce DC which must be converted to AC when used in
currently existing distribution grids

21
 CONCLUSION
 The invention of Solar Tracking System helps us improve the
performance of PV solar system in a simple way
 Used relative method of sunlight strength.
 Established a model of automatic tracking system to keep vertical
contact between solar panels and sunlight.
 Improved the utilization rate of solar energy and efficiency of
photovoltaic power generation system.

22
 REFERENCE
 http://www.alltronics.com/stpper _motor.html
 http://fsae.mae.cornell.edu/
 http://www.optimum-tracker.com/solartrackers/

23
24
25