Goodmanufacturingpracticepritesh 160516130050

GOOD MANUFACTURING PRACTICE
Engr.Tahir Iqbal
Assistant Manager QSHE
2023
What is GMP?
Good Manufacturing
Practice is a set of
regulations, codes, and
guidelines for the
manufacture of drug
substances and drug
products, medical devices,
in vivo and in vitro
diagnostic products, and
foods.
GMP handbooks for every

industry 3
OBJECTIVE
Guarantee high quality products to the
consumer.
Delivering products free of all

possible contamination
4
GENERAL REQUIREMENTS
Avoid risks and possibilities of mix-up at all
stages of Mfg, labeling Pkg and testing
AHUs, comfort of the personnel working
and regular monitoring of temp & humidity,
Particle Count, DOP testing etc.
 Proper drainage system which prevents
backflow. Avoid open channels and
provided if must be able to clean and
disinfect.
5
Building & Facilities
1. Design and construction features.
2. Lighting.
3. Ventilation, air filtration, air heating and cooling.
4. Plumbing.
5. Sewage and refuse.
6. Washing and toilet facilities.
7. Sanitation.
8. Maintenance.
6
Good Manufacturing Practices
A basic principle of GMP is that quality cannot

be tested into a batch of product but must be
built into each batch of product during all stages
of the manufacturing process.
It is designed to minimize the risks involved in

any pharmaceutical production that cannot be
eliminated through testing the final product.
7
Ten Principles of GMP
1. Design and construct the facilities and
equipments properly
2. Follow written procedures and Instructions
3. Document work
4. Validate work
5. Monitor facilities and equipment
6. Write step by step operating procedures and
work on
instructions
7. Design ,develop and demonstrate job competence
8. Protect against contamination
9. Control components and product related
processes
10. Conduct planned and periodic audits
8
GMP Categories
Packaging
Sale Material Testing
Premises Finished Product
Equipment Testing
Quality
Personnel
Control
Sanitation Department
Raw Material Testing Records
Manufacturing Samples
Control Stability
Sterile
Products
9
Sale
No distributor … and no importer shall sell a
drug unless it has been fabricated,
packaged/labeled, tested, and stored .
Premises & Equipment

Permits effective cleaning
Prevents contamination
Orderly conditions
Good state of repair
10
Personnel
Appropriate education, training and
experience
Sufficient number of people
Receive GMP training
sanitation
Sanitation Program to prevent
contamination
Limit the sources and types of contamination
 Cleaning procedures for facilities & equipment
 Pest control
 Environmental monitoring
11
Raw Material, Packaging Material and
Finished Product Testing
each lot or batch of raw material is tested
 confirm the identity of the raw materials
 provide assurance that quality of the drug in dosage
Samples of incoming materials are collected and

tested before use
Approved test methods and specifications are used
Results must conform to specifications for release
for use or sale
Transportation and storage records
12
Manufacturing Control
Written procedures are established and followed
Master formulae, manufacturing order and
packaging order
Critical processes are validated
2nd person verification of activities
Self-Inspection Programmed
13
Quality Control Department
Quality Control Responsibilities
Testing of bulk components prior to use by
production
Testing of finished product prior to release for sale
Stability program
Review batch records, labels
Release product, based on QC test results
Training, auditing
Customer complaints
14
Records
Document all GMP activities
Use Good Documentation Practices
(GDP)
Records must be readily available
Good Documentation Practices

Documentation must be:
permanent (black or blue ink)
legible, clear, concise
accurate
Timely, complete
15
Samples
Retain samples of each lot of raw material and
finished product for specified period of time
Stability
Establish the length of time in which
the product meets all specifications
Monitor the drug for this period of time
Sterile Products
Packaged in separate enclosed area by trained
personnel using method to ensure sterility
16
Why GMP is important
A poor quality medicine may contain toxic

substances that have been unintentionally added.
A medicine that contains little or none of the claimed

ingredient will not have the intended therapeutic
effect.
17
GMP IN……
GMP in solid dosage forms

GMP in semisolid dosage forms
GMP in Liquid orals
GMP in Parenterals Production
GMP in Ayurvedic medicines
GMP in Bio technological products
GMP in Nutraceuticals and
cosmeceuticals
GMP in Homeopathic medicines
18
Some of the main risks are….
unexpected contamination of products, causing damage

to health or even death.
incorrect labels on containers, which could mean

that patients receive the wrong medicine.
insufficient or too much active ingredient, resulting

in ineffective treatment or adverse effects.
19
Conclusion
From the above discussion we can conclude that -
Pharmaceutical Industry is regulated by GMPs
Good Manufacturing Practices must be followed
GMPs ensure drug products are safe, pure

and effective.
20
References
Dipak K.Sarker, Quality system & cantrol for
pharmaceutics by published John wiley & sons Ltd P.N.-57-
88
Quality Assurance of Pharmaceuticals – A Compendiam
of guidelines & related material vol-2 GMP & inspection,
published by Pharma Book Syndicate , Page.No.- 6-83
www.Scribd.com/doc/5554035/The-Ten -Principles-of-
GMP
www1.agric.gov.ab.ca/...nsf/all/.../good_manufacturing_pra
ctices_pp.ppt
www.fda.gov/cosmetics/guidancecomplianceregulatoryinf
ormation/goodmanufa...
21
22

Goodmanufacturingpracticepritesh 160516130050

Uploaded by

Copyright:

Available Formats

Goodmanufacturingpracticepritesh 160516130050

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Goodmanufacturingpracticepritesh 160516130050

Uploaded by

Copyright:

Available Formats

GOOD MANUFACTURING PRACTICE

GMP handbooks for every

Delivering products free of all

A basic principle of GMP is that quality cannot

It is designed to minimize the risks involved in

Premises & Equipment

Samples of incoming materials are collected and

Good Documentation Practices

A poor quality medicine may contain toxic

A medicine that contains little or none of the claimed

GMP in solid dosage forms

unexpected contamination of products, causing damage

incorrect labels on containers, which could mean

insufficient or too much active ingredient, resulting

Good Manufacturing Practices must be followed

GMPs ensure drug products are safe, pure

You might also like