Scribd
Upload
55 views17 pages

Data Communication Lecture 9

This document provides an overview of Wavelength-division multiplexing (WDM) and Time-division multiplexing (TDM). It explains that WDM allows multiple optical signals of different wavelengths to be combined and transmitted through the same fiber optic cable. TDM involves dividing the transmission link into time slots and allocating each signal to a time slot, so that multiple signals can be transmitted through the same link by taking turns. The document also discusses synchronous TDM, where time slots are allocated evenly whether the signal is active or not.

Uploaded by

Sadatur Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
55 views17 pages

Data Communication Lecture 9

This document provides an overview of Wavelength-division multiplexing (WDM) and Time-division multiplexing (TDM). It explains that WDM allows multiple optical signals of different wavelengths to be combined and transmitted through the same fiber optic cable. TDM involves dividing the transmission link into time slots and allocating each signal to a time slot, so that multiple signals can be transmitted through the same link by taking turns. The document also discusses synchronous TDM, where time slots are allocated evenly whether the signal is active or not.

Uploaded by

Sadatur Rahman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

Bandwidth Utilization (Part 1):

WDM and TDM


Course Code: COE 3201 Course Title: Data Communication

Dept. of Computer Engineering


Faculty of Engineering

Lecture: 09
Lecture Outline

1. Wavelength-division multiplexing (WDM)


2. Time-division multiplexing (TDM)
3. Synchronous TDM
Wavelength-division multiplexing
(WDM)

• Wavelength-division multiplexing (WDM) is designed


to use the high-data-rate capability of fiber-optic
cable.
• The optical fiber data rate is higher than the data rate
of metallic transmission cable but using a fiber-optic
cable for a single line wastes the available bandwidth.
• WDM allows us to combine several lines into one.
• WDM is conceptually the same as FDM, except that the
multiplexing and demultiplexing involve optical signals transmitted
through fiber-optic channels.
• The idea is the same: We are combining different signals of
different frequencies.
• The difference is that the frequencies are very high.
• Figure 6.10 gives a conceptual view of a WDM multiplexer and
demultiplexer.
• Very narrow bands of light from different sources are combined to
make a wider band of light. At the receiver, the signals are
separated by the demultiplexer.
Figure 6.10: Wavelength-division multiplexing
• Although WDM technology is very complex, the basic
idea is very simple.
• We want to combine multiple light sources into one
single light at the multiplexer and do the reverse at the
demultiplexer.
• The combining and splitting of light sources are easily
handled by a prism.
Figure 6.11: Prisms in wave-length division multiplexing
Time-division multiplexing
(TDM)
• Time-division multiplexing (TDM) is a digital process that
allows several connections to share the high bandwidth of a
link.
• Instead of sharing a portion of the bandwidth as in FDM,
time is shared. Each connection occupies a portion of time
in the link.
• Figure 6.12 gives a conceptual view of TDM.
• Note that the same link is used as in FDM; here, however,
the link is shown sectioned by time rather than by
frequency.
• In the figure, portions of signals 1, 2, 3, and 4 occupy
the link sequentially.

Figure 6.12: TDM


Synchronous TDM
• We can divide TDM into two different schemes:
synchronous and statistical.
• In synchronous TDM, each input connection has an
allotment in the output even if it is not sending data.
• Time Slots and Frames: In synchronous TDM, the data flow
of each input connection is divided into units, where each
input occupies one input time slot. Each input unit becomes
one output unit and occupies one output time slot.
However, the duration of an output time slot is n times
shorter than the duration of an input time slot.
Synchronous TDM

Figure 6.13: Synchronous time-division


multiplexing
Synchronous TDM
Example 6.5: In Figure 6.13, the data rate for each input connection is 1 kbps.
If 1 bit at a time is multiplexed (a unit is 1 bit), what is the duration of 1. each
input slot, 2. each output slot, and 3. each frame?
Solution: We can answer the questions as follows:
1. The data rate of each input connection is 1 kbps. This means that the bit
duration is 1/1000 s or 1 ms. The duration of the input time slot is 1 ms (same
as bit duration).
2. The duration of each output time slot is one-third of the input time slot.
This means that the duration of the output time slot is 1/3 ms.
3. Each frame carries three output time slots. So the duration of a frame is 3 ×
(1/3) ms, or 1 ms. The duration of a frame is the same as the duration of an
input unit.
Synchronous TDM
Example 6.5: Figure 6.14 shows synchronous TDM with a data
stream for each input and one data stream for the output. The
unit of data is 1 bit. Find (a) the input bit duration, (b) the output
bit duration, (c) the output bit rate, and (d) the output frame rate.

Figure 6.14: Example 6.6


Synchronous TDM
Synchronous TDM
Example 6.5: Four 1-kbps connections are multiplexed together. A unit is 1 bit.
Find (1) the duration of 1 bit before multiplexing, (2) the transmission rate of
the link, (3) the duration of a time slot, and (4) the duration of a frame.
Books

[1] Forouzan AB. Data communications & networking.


5th ed., Tata McGraw-Hill Education.
References

1. Prakash C. Gupta, “Data communications”, Prentice Hall India Pvt.


2. William Stallings, "Data and Computer Communications”, Pearson
3. Forouzan, B. A. "Data Communication and Networking. Tata McGraw." (2005).

You might also like