Chapter 3 Defect

Chapter Three
Types of defect and their influences

on property of crystal
Introduction
• Defect means something that makes thing imperfect
and causes weakness or failure
• “crystalline defect” is meant a lattice irregularity having
one or more of other atom or missing its own atom
• The properties of some materials are profoundly
influenced by the presence of imperfections.
• the mechanical properties of pure metals experience
significant alterations when alloyed (i.e., when impurity
atoms are added)—
• for example, brass (70% copper–30% zinc) is much
harder and stronger than pure copper
Types of defect
1. Point defect : vacancies, interstitials and , impurity
items
2. Line defect : fundamental of edge, screw and mixed
dislocations
3. Planer defect : grain boundaries phase boundaries,
twinning and stacking faults
Point Defects
Vacancies
• The simplest of the point defects is a vacancy, or vacant
lattice site, one normally occupied from which an atom is
missing .
• Missing an atom from lattice site is called vacancies
• All crystalline solids contain vacancies and, in fact, it is
not possible to create such a material that is free of these
defects.
• The presence of vacancies increases the entropy (i.e. the
randomness) of the crystal.
• The equilibrium number of vacancies Nv for a given
quantity of material depends on and increases with
temperature according to
Cont…
Continue……..
• In this expression,
N = is the total number of atomic sites,
Qv = is the energy required for the formation of a vacancy,
T = is the absolute temperature in Kelvin's, and
k = is the gas or Boltzmann’s constant.
k=
Conti……
Self-interstitials
• Foreign atom sitting in the void of a crystal
• A self-interstitial is an atom from the crystal that is crowded into
an interstitial site, a small void space that under ordinary
circumstances is not occupied.
• In metals, a self-interstitial introduces relatively large distortions
in the surrounding lattice because the atom is substantially
larger than the interstitial position in which it is situated.
Consequently,
• the formation of this defect is not highly probable, and it exists
in very small concentrations, which are significantly lower than
for vacancies.
continue….
Impurity
• Most familiar metals are not highly pure; rather, they are
alloys, in which impurity atoms have been added intentionally
to impart specific characteristics to the material.
• alloying is used in metals to improve mechanical strength and
corrosion resistance. For example, sterling silver is a 92.5%
silver % copper alloy. In normal ambient environments, pure
silver is highly corrosion resistant, but also very soft.
• Alloying with copper significantly enhances the mechanical
strength without depreciating the corrosion resistance
appreciably.
solid solution
• A solid solution forms when, as the solute atoms are

added to the host material,
• the crystal structure is maintained, and no new structures
are formed.
• The addition of impurity atoms to a metal will result in the
formation of a solid solution and/or a new second phase,
depending on the kinds of impurity, their concentrations,
and the temperature of the alloy
• Solvent” represents the element or compound that is
present in the greatest amount; on occasion, solvent
atoms are also called host atoms.
• “Solute” is used to denote an element or compound
present in a minor concentration
continue………
• Impurity point defects are found in solid solutions, of which

there are two types: substitutional and interstitial.
• For the substitutional type, solute or impurity atoms replace
or substitute for the host atoms
• For interstitial solid solutions, impurity atoms fill the voids or
interstices among the host atoms
• For metallic materials that have relatively high atomic packing
factors, these interstitial positions are relatively small
continue………
factors determine the degree to which the solute
dissolves in the solvent
1. Atomic size factor. Appreciable quantities of a solute may be
accommodated in substitutional type of solid solution only
when the difference in atomic radii between the two atom
types is less than about 15%.
Otherwise the solute atoms will create substantial lattice
distortions and a new phase will form.
2. Crystal structure. For appreciable solid solubility the crystal
structures for metals of both atom types must be the same.
3. Electro negativity. The more electropositive one element and
the more electronegative the other, the greater is the
likelihood that they will form an intermetallic compound
instead of a substitutional solid solution.
4. Valences. Other factors being equal, a metal will have more
of a tendency to dissolve another metal of higher valency
than one of a lower valency.
Line defects
• A dislocation is a linear or one-dimensional defect around

which some of the atoms are misaligned.
• Edge dislocation; it is a linear defect that centers around the
line that is defined along the end of the extra half-plane of
atoms. This is sometimes termed the dislocation line
• Within the region around the dislocation line there is some
localized lattice distortion. The atoms above the dislocation
line are squeezed together, and those below are pulled apart;
• The magnitude of this distortion decreases with distance
away from the dislocation line; at positions far removed, the
crystal lattice is virtually perfect.
continue………
• screw dislocation, exists, which may be thought of as being
formed by a shear stress that is applied to produce the
distortion.
• the upper front region of the crystal is shifted one atomic
distance to the right relative to the bottom portion.
• The atomic distortion associated with a screw dislocation is
also linear and along a dislocation line.
• The screw dislocation derives its name from the spiral or
helical path or ramp that is traced around the dislocation line
by the atomic planes of atoms.
• Most dislocations found in crystalline materials are probably
neither pure edge nor pure screw, but exhibit components of
both types; these are termed mixed dislocations.
• the lattice distortion that is produced away from the two
faces is mixed, having varying degrees of screw and edge
character.
continue,……
continue….
continue….
continue………
continue…….
Burgers vector
• The magnitude and direction of the lattice distortion
associated with a dislocation is expressed in terms of a
Burgers vector, denoted by a b.
• Furthermore, the nature of a dislocation (i.e., edge,
screw, or mixed) is defined by the relative orientations
of dislocation line and Burgers vector.
• For an edge, they are perpendicular, whereas for a
screw, they are parallel ; they are neither perpendicular
nor parallel for a mixed dislocation.
• Also, even Though a dislocation changes direction and
nature within a crystal (e.g., from edge to mixed to
screw), the Burgers vector will be the same at all points
along its line.
Interfacial(planer) defects
• Interfacial defects are boundaries that have two dimensions

and normally separate regions of the materials that have
different crystal structures and/or crystallographic
orientations.
• These imperfections include
I. external surfaces,
II. grain boundaries,
III. twin boundaries,
IV. stacking faults, and
V. phase boundaries.
Bulk or volume defects
• These include pores, cracks, foreign inclusions, and other

phases. They are normally introduced during processing
and fabrication steps.
…..
THE END
THANK YOU

Chapter 3 Defect

Uploaded by

Copyright:

Available Formats

Chapter 3 Defect

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chapter 3 Defect

Uploaded by

Copyright:

Available Formats

Chapter Three

Types of defect and their influences

• A solid solution forms when, as the solute atoms are

• Impurity point defects are found in solid solutions, of which

• A dislocation is a linear or one-dimensional defect around

• Interfacial defects are boundaries that have two dimensions

• These include pores, cracks, foreign inclusions, and other

You might also like