Scribd Logo
Upload

Welcome to Scribd!

  • 14 views

    ACTION PLAN Dim 15.5

    Uploaded by

    gurpreet singh
    The document summarizes a part quality issue where the rachet assembly parking brake part was found to have a dimension of 15.5 mm, exceeding the allowed tolerance of 15.5+/-0.5mm. The root cause was determined to be an incorrect toggle clamp position in the welding fixture, which resulted in the child part lifting abnormally. To address this, the toggle position was corrected in the welding fixture. A receiving gauge was also implemented to check 100% of parts and control plans and FMEAs were updated to standardize the improvements.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd

    ACTION PLAN Dim 15.5

    Uploaded by

    gurpreet singh
    14 views1 page
    The document summarizes a part quality issue where the rachet assembly parking brake part was found to have a dimension of 15.5 mm, exceeding the allowed tolerance of 15.5+/-0.5mm. The root cause was determined to be an incorrect toggle clamp position in the welding fixture, which resulted in the child part lifting abnormally. To address this, the toggle position was corrected in the welding fixture. A receiving gauge was also implemented to check 100% of parts and control plans and FMEAs were updated to standardize the improvements.

    Original Description:

    Improvement done

    Original Title

    ACTION PLAN dim 15.5

    Copyright

    © © All Rights Reserved

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes a part quality issue where the rachet assembly parking brake part was found to have a dimension of 15.5 mm, exceeding the allowed tolerance of 15.5+/-0.5mm. The root cause was determined to be an incorrect toggle clamp position in the welding fixture, which resulted in the child part lifting abnormally. To address this, the toggle position was corrected in the welding fixture. A receiving gauge was also implemented to check 100% of parts and control plans and FMEAs were updated to standardize the improvements.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    14 views1 page

    ACTION PLAN Dim 15.5

    Uploaded by

    gurpreet singh
    The document summarizes a part quality issue where the rachet assembly parking brake part was found to have a dimension of 15.5 mm, exceeding the allowed tolerance of 15.5+/-0.5mm. The root cause was determined to be an incorrect toggle clamp position in the welding fixture, which resulted in the child part lifting abnormally. To address this, the toggle position was corrected in the welding fixture. A receiving gauge was also implemented to check 100% of parts and control plans and FMEAs were updated to standardize the improvements.

    Copyright:

    © All Rights Reserved
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    of 1

    Action Details – Part Quality Improvement

    Part Name. : Rachet ssembly Parking Brake Part No. : P80002117B Supplier Name : Moonlight Automat
    Defect Reported Date : 29.06.2023 Defect Stage : Incoming Inspection Impact:- Fitment issue
    Problem Statement : MarkDim 15.5 mm found oversize

    BEFORE  AFTER

    Details:- Toggle clamp position corrected &


    Details:- Dim. 15.5+/- 0.50mm found O/S due to toggle child part not lifting resulting in OK Dim.,
    clamp position not ok , lifting the child part . Receiving Gauge implemented 100%
       

    (What) (Why) (How) (When) (Who) (Where)


    # Status
    Defect Observations Root Cause Action Plan Target date Resp Location

    1. Toggle position corrected in welding


    1. Toggle position in welding
    fixture ,
    fixture was wrong resulting in Gurpreet
    Dim 15.5+/- 0.5 2. Receiving gauge implemented to check 29.06.2023 Done
    lifting of child part . Singh MAMPL,
    1. observed O/S upto 100% parts in gauge .
    2. No provision of 100% LUDHIANA
    17mm 3. Control plan & FMEA to update for 05.07.2023.
    inspection of this dimension . Rahul
    standardization of the above implemented
    1
    points .

    You might also like