Chapter 1

Introduction

Kyung Hee
University
1
 Data Communications and Networking

Kyung Hee
University
2
 1.1 DATA COMMUNICATIONS
The term telecommunication means communication at a
distance. The word data refers to information presented in
whatever form is agreed upon by the parties creating and
using the data. Data communications are the exchange of
data between two devices via some form of transmission
medium such as a wire cable.

Topics discussed in this section:

Components
Data Representation
Data Flow
Kyung Hee
University
3
 Fundamental Characteristics
 The effectiveness of a data communication system depends on
three fundamental characteristics

 Delivery

must deliver data to the correct destination
 (the intended device or user)
 Accuracy

 must deliver data accurately

 Timeliness

 must deliver data in a timely manner

 Jitter

 Refers to the variation in the packet arrival time.

Kyung Hee
University
4
 Data communication system components

Figure 1.1 Five components of data communication

Kyung Hee
University
5
 Data communication system components (cont’d)

 Message
 is the information(data) to be communicated.
(text, numbers, pictures, sound, video or any combination of
these)

 Sender
 is the device that sends the data message.
(computer, workstation, telephone handset, video camera)

 Receiver
 is the device that receives the message.
(computer, workstation, telephone handset, video camera)

Kyung Hee
University
6
 Data communication system components (cont’d)

 Medium

 is the physically path by which a message travels from sender

to receiver.

(twisted pair wire, coaxial cable, fiber- optic cable, laser , or

radio waves(terrestrial or satellite microwave))

 Protocol

 is a set of rules that govern data communication.

Kyung Hee
University
7
 Data Presentation
 Text is represented as a bit pattern.
 Code : Each sets of bit patterns to represent text symbols.
 ASCII : by ANSI, 7bits
 Extended ASCII, 8bits
 Unicode : 16 bits
 ISO : 32bits

 Numbers : also represented by bit patterns.

 Images : also represented by bit patterns. (Picture)

 Audio : It is continuous, not discrete. (Voice or music)

 Video : The recording or broadcasting of a picture or movie.

Kyung Hee
University
8
Direction of Data Flow
 is used to define the direction of signal flow between two link
devices

 Simplex

 unidirectional, as on a one-way street (keyboard, monitor)

 Half-Duplex

 each station can both transmit and receive, but not at the same
time

 Full-Duplex

 both stations can transmit and receive simultaneously

Kyung Hee
University
9
Direction of Data Flow (cont’d)
Figure 1.2 Data flow (simplex, half-duplex, and full-duplex)

Kyung Hee
University
10
 1.2 NETWORKS

A network is a set of devices (often referred to as nodes)

connected by communication links. A node can be a
computer, printer, or any other device capable of sending
and/or receiving data generated by other nodes on the
network.

Topics discussed in this section:

Distributed Processing
Network Criteria
Physical Structures
Network Models
Categories of Networks
Interconnection of Networks: Internetwork
Kyung Hee
University
11
 Distributed processing

 A task is divided among multiple computers.

 Instead of one single large machine being responsible

for all aspects of a process, separate computers handle
a subset.

Kyung Hee
University
12
 Network Criteria

Network Criteria

Performance Reliability Security

Kyung Hee
University
13
 Performance

 Depends on a number of factors.

 number of users

 type of transmission medium(data rate)

 hardware

 software : error-free delivery

 Evaluated by two networking metrics:

Throughput and Delay.

Kyung Hee
University
14
 Reliability

 Frequency of failure

 Recovery time of a network after a failure

 Catastrophe

 Networks must be protected from catastrophic events such as

fire, earthquake, or theft.

Kyung Hee
University
15
 Security

 Protecting data from Unauthorized access

 Protecting data from Viruses and Worms

Kyung Hee
University
16
 Physical Structures
 Type of Network Connection

 Point-to-point
 provides a dedicated link between two devices.

 Multipoint : multi-drop
 is configuration in which more than two specific devices share a
single link

Kyung Hee
University
17
 Physical Structures (cont’d)

Figure 1.3 Types of connections: point-to-point and multipoint

Kyung Hee
University
18
 Physical Topology

Kyung Hee
University
19
 Physical Topology
 Mesh
 Every device has a dedicated point-to-point link to
every other device.

 A fully connected mesh network therefore has

n(n-1)/2 physical channels to link n devices.

Kyung Hee
University
20
 Mesh
 Mesh

Kyung Hee
University
21
 Mesh (cont’d)

 Advantages

 The use of dedicated links guarantees that each connection

can carry its data load.

 Mesh topology is robust.

 Privacy and security.

 Point-to-point links make fault identification and fault isolation

easy.

Kyung Hee
University
22
 Mesh (cont’d)

 Disadvantages
are related to the amount of cabling and the number
of I/O ports
 because every device must be connected to every other
device, installation and reconfiguration are difficult
 the sheer bulk of the wiring can be greater than the available
space(in walls, ceiling, or floors) can accommodate
 the hardware required to connect each link (I/O port and cable)
can be prohibitively expensive

Kyung Hee
University
23
 Star Topology
 Each device has a dedicated point-to-point link only to a central
controller, usually called a hub

 Star Topology

Kyung Hee
University
24
 Star (cont’d)

 Advantage

 Each device needs only one link and one I/O port to connect it
to any number of others (easy to install and reconfigure)

 Robustness

 if one link fails, only that link is affected

Kyung Hee
University
25
 Tree Topology

 Tree topology is a variation of a star

 active hub(central hub)

 contains a repeater, which is a hardware device that
generates the received bit patterns before sending them out

 passive hub
 provides a simple physical connection between the
attached devices

Kyung Hee
University
26
 Bus Topology
 Bus topology is multipoint. One long cable acts as a backbone to
link all the devices in the network

 Nodes are connected to the bus cable by drop lines and taps

 Drop line
 is a connection running between the device and the main
cable
 Tap
 is a connector either splices into the main cable or
punctures the sheathing of a cable to create a contact with
the metallic core

Kyung Hee
University
27
 Bus Topology (cont’d)

Kyung Hee
University
28
 Bus (cont’d)
 Advantages
 include ease of installation

 Disadvantages
 include difficult reconfiguration and fault isolation

Kyung Hee
University
29
 Ring Topology
 Each device has a dedicated point-to-point line configuration only
with the two devices on either side of it

 Advantage

 is relatively easy to install and reconfigure

 fault isolation is simplified

 Disadvantage

 unidirectional traffic

 break in the ring can disable the entire network

--> needs dual ring

Kyung Hee
University
30
 Hybrid Topology
 A network can be hybrid.

 For example, a main star topology with each branch connecting

several stations in a bus topology.

Kyung Hee
University
31
 Categories of Networks
 Three primary categories
 size, ownership, distance it cover, physical architecture

Network

Local area networks Metropolitan area network Wide area network

(LAN) (MAN) (WAN)

Kyung Hee
University
32
 LAN (Local Area Networks)

 LAN is usually privately owned and links the devices in a single

office, building or campus

Figure 1.10 An isolated LAN connecting 12 computers to a hub in a closet

Kyung Hee
University
33
 Categories of Networks (cont’d)

Kyung Hee
University
34
 Categories of Networks (cont’d)
 MAN (Metropolitan Area Networks)
 is designed to extend over an entire city

Kyung Hee
University
35
 Categories of Networks (cont’d)
 WAN(Wide Area networks)
 provides long-distance transmission of data, voice, image, and
video information over large geographical areas that may
comprise a country, a continent, or even the whole world

Kyung Hee
University
36
 Categories of Networks (cont’d)
Figure 1.11 WANs: a switched WAN and a point-to-point WAN

Kyung Hee
University
37
 Interconnection of Networks : Internetwork
 Two or more networks are connected, they become an internet.

Figure 1.12 A heterogeneous network made of four WANs and two LANs

Kyung Hee
University
38
 1.3 THE INTERNET

The Internet has revolutionized many aspects of our daily

lives. It has affected the way we do business as well as the
way we spend our leisure time. The Internet is a
communication system that has brought a wealth of
information to our fingertips and organized it for our use.

Topics discussed in this section:

A Brief History
The Internet Today (ISPs)

Kyung Hee
University
39
 Internet
 A Brief History
 Internet (not internet)
 ARPANET (Advanced Research Projects Agency: ARPA) – mid-1960s
 Advanced Research Projects Agency (ARPA) in the DOD : presented ideas
of ARPANET, 1967
 Reality : 1969 (UCLA, UCSB, SRI, U of Utah)
 Birth of Internet : in 1972
 Vint Cerf and Bob Kahn : Internetting Project
 TCP/IP : A paper by Cerf and Kahn in 1973
 In 1983, TCP/IP became to official protocol for the ARPANET
 MILNET : in 1983
 CSNET, NSFNET, ANSNET, …

Kyung Hee
University
40
 Internet Today
 1969. Four-node ARPANET established.

 1970. ARPA hosts implement NCP.

 1973. Development of TCP/IP suite begins.

 1977. An internet tested using TCP/IP.

 1978. UNIX distributed to academic sites.

 1983. TCP/IP becomes the official protocol

 1983. MILNET was born.

 1986. NSFNET established.

 1986, IETF First Meeting

 1990. ARPANET replaced by NSFNET.

 1991. WWW by CERN

 1995. NSFNET became a research network.

 1995. ISPs started.

 2006 GENI (Global Environment for Network Innovations) for Future Internet
Kyung Hee
University
41
 Internet Today
Figure 1.13 Hierarchical organization of the Internet

Kyung Hee
University
42
1-4 PROTOCOLS AND STANDARDS

In this section, we define two widely used terms: protocols

and standards. First, we define protocol, which is
synonymous with rule. Then we discuss standards, which are
agreed-upon rules.

Topics discussed in this section:

Protocols
Standards
Standards Organizations
Internet Standards
Kyung Hee
University
43
 Protocols and Standard

 Communication in computer networks

Communication occurs between entities in different systems

 Entity

is anything capable of sending or receiving information

 Protocol

is a set of rules that govern data communication

Kyung Hee
University
44
 Protocol & Standards (cont’d)

 Key elements of a Protocol

 Syntax ( 문법 )
 refers to the structure or format of the data, meaning the
order in which they are presented.
 Semantics ( 의미론 )
 refers to the meaning of each section of bits.
 Timing ( 타이밍 )
 refers to two characteristics (when data should be sent and
how fast it can be sent)

Kyung Hee
University
45
 Standards
 Standards( 표준 )

 are essential in creating and maintaining an open and

competitive market for equipment manufactures and in
guaranteeing national and international interoperability of data
and communications technology and processes.

Standards

De facto De jure
(by fact) (by law)

Kyung Hee
University
46
 Standards Organizations ( 표준화 기구 )

 Standard Creation Committees

 ISO (The International Standard Organization)

 created in 1947

 Multi national body

 is an organization dedicated to worldwide agreement on

international standards in a variety of fields (scientific,
technological, economic activity)

Kyung Hee
University
47
 Standards Organizations (cont’d)

 ITU-T(International Telecommunications Union -

Telecommunications Standards Sector)

 is an international standards organization related to the

United Nations that develops standards for

telecommunications.

 Two popular standards developed by ITU-T are the V series

(data transmission over phone lines) and the X series

(transmission over public digital networks)

Kyung Hee
University
48
 Standards Organizations (cont’d)
 ANSI (American National Standard Institute)
 is a nonprofit organization and is the U.S. voting
representative to be both the ISO and the ITU-T

 IEEE (Institute of Electrical and Electronic Engineers)

 is the largest national professional group involved in
developing standards for computing, communication,
electrical engineering, and electronics)

 EIA (Electronic Industries Association)

 is an association of electronics manufactures in the United
States. (EIA-232-D, EIA-530 standards)

Kyung Hee
University
49
 Standards Organizations (cont’d)
 Forums

 consist of representatives from corporation that

test, evaluate and standardize new technologies.
 Frame Relay Forum

 ATM Forum and ATM consortium

 Regulatory agencies
 FCC (Federal Communications Commission)

Kyung Hee
University
50
 Internet Standards
 Internet standard by IETF (Internet Engineering Task
Force)
 is a thoroughly tested specification that is useful to and
adhered by those who work with the Internet

 A specification begins as an Internet draft

 Working document with no official status and six-month life-
time

 RFC (Request for Comment) Recommendation from

Internet authorities
Kyung Hee
University
51
 Standards (cont’d)
 by law standard
~ are those that have been legislated by an officially recognized body.

 by fact standard
~ are often established originally by manufactures seeking to define the
functionality of a new product or technology.

 proprietary (closed)

~ are those originally invented by a commercial organization as a

basis for the operation of its products.
 nonproprietary (open)

~ are those originally developed by group or committees that have

passed them into the public domain.

Kyung Hee
University
52
 Standards Organizations (cont’d)

 Telecommunications Technology Association

한국정보통신기술협회 (TTA) : http://www.tta.or.kr
ITU related standardization
 Korean Agency for Technology and Standards
한국기술표준원 [KATS] : http://www.kats.go.kr
ISO related standardization

Kyung Hee
University
53
 Summary (1)
 Data communications are the transfer of data from one device to another
via some form of transmission medium.

 A data communications system must transmit data to the correct

destination in an accurate and timely manner.

 The five components that make up a data communications system are the
message, sender, receiver, medium, and protocol.

 Text, numbers, images, audio, and video are different forms of information.

 Data flow between two devices can occur in one of three ways: simplex,
half-duplex, or full-duplex.

 A network is a set of communication devices connected by media links.

 In a point-to-point connection, two and only two devices are connected by a

dedicated link. In a multipoint connection, three or more devices share a
link.

Kyung Hee
University
54
 Summary (2)
 Topology refers to the physical or logical arrangement of a network.
Devices may be arranged in a mesh, star, bus, or ring topology.

 A network can be categorized as a local area network or a wide area

network.

 A LAN is a data communication system within a building, plant, or

campus, or between nearby buildings.

 A WAN is a data communication system spanning state, countries,

or the whole world.

 An internet is a network of networks.

 The Internet is a collection of many separate networks.

 There are local, regional, national, and international Internet service

providers.
Kyung Hee
University
55
 Summary (3)
 A protocol is a set of rules that govern data communication; the
key elements of a protocol are syntax, semantics, and timing.

 Standards are necessary to ensure that products from different

manufacturers can work together as expected.

 The ISO, ITU-T, ANSI, IEEE, and EIA are some of the organizations
involved in standards creation.

 Forums are special-interest groups that quickly evaluate and

standardize new technologies.

 A Request for Comment (RFC) is an idea or concept that is a

precursor to an Internet standard.

Kyung Hee
University
56
 Q&A

Kyung Hee
University
57