IP-20C 1+0

Commissioning Ceragon Equipment

Imam Way
PC Setup

To get the connection between the PC and the IP-20 unit,

it is necessary to haveIP Address and subnet on the PC with the same IP-20 unit.
IP default adalah 192.168.1.1
Subnet mask 255.255.255.0

Imam Way
Login via web browser

Open an Internet browser (Internet Explorer, chrome or Mozilla Firefox).

Type the default IP address 192.168.1.1 in the Address Bar.
User Name: admin
Password: admin

Imam Way
 Konfigurasi
License
First, change the Demo admin license to Enable.

Imam Way
IP Address
To enter the IP configuration page, select Platform/Management/IP/Local.
By clicking on this sequence attached in the image (Example) below.
Then setting the IP Address 192.168.1.1 for site A and 192.168.1.2 for site B.

Imam Way
Modulation Config
The MRMC Symmetrical Scripts page lists the Multi-Rate Multi-Constellation (MRMC) radio script.
The radio script determines how the radio uses the available capacity.
Each script is a collection of configuration settings that define Radio Transmit and Received Level,
Link Modulation, Channel Spacing, and Bit Rate.
Modulation settings on both sites or 1 link must be the same.

Contoh Gambar Imam Way

Modulation Config
Choose according to the planning capacity (Adaptive)

Contoh Gambar Imam Way

Frequencies Setup
Open Radio by selecting Radio Parameters.
For IP-20, select the radio you want to configure and click Edit.

Set the TX freq and TX level according to the plan.

Change TX Mute to Unmute.
Then Apply

Contoh Gambar

Note :

Config up to here can be done Pointing, if the config to the two sites are the same. Imam Way
Create Service MNG
You can configure in-band management to manage units to communicate with each other via radio and/or Ethernet Interface.
Each IP-20C unit includes a designated Management Service with Service ID 257.
To enable in-band management, you must add at least one Service to the Management Service as shown in the following figure.

Contoh Gambar Imam Way

Create Service MNG
Below is the Vlan Management tagging on Microwave Radio for IP-20 units.
Note: The tagged Vlan must match the IP and Vlan Planning.
Radio connection NE to FE, Ethernet just input or output VLAN (sometime no need to add)

Contoh Gambar Imam Way

Create Service Ethernet
To add a Service Point, click "Add" as shown in the example below, configure the appropriate parameters and click "Apply".
After adding a Service Point, you must add a VLAN to the Service Point so that Traffic can pass.

Contoh Gambar Imam Way

Create Service Ethernet
Then click Add then configure according to Plan.

Contoh Gambar Imam Way

Create Service Ethernet
Here's what it looks like when it's finished.

Contoh Gambar Imam Way

Finishing port interface manager
Enable Ethernet port (radio 1 and eth 1 set to UP)

Contoh Gambar Imam Way

Finishing Installation and Configuration
Back to Point 1 for configuration opposite, after all configuration done.
Link ready to pointing and capacity testing.

Contoh Gambar Imam Way

 IP-20C 2+0
Commissioning Ceragon Equipment
Imam Way
Login
User & Pass : admin admin.

Contoh Gambar Imam Way

Enable Demo License (if not have license)

Contoh Gambar Imam Way

Unit Parameter (Site Information Labelling)

Contoh Gambar Imam Way

IP Setting (as per plan)

Contoh Gambar Imam Way

Enable 2+0 Configuration
Radio/Groups/Multicarier ABC, Create group

Contoh Gambar Imam Way

Creating MC-ABC Configuration Process

Step 1 : group name 2+0 than click next Step 2 : Member #1 than click next Step 3 : Member #2 than click finish

Contoh Gambar Imam Way

Created Radio Configuration Done

Contoh Gambar Imam Way

Frequency set up
Radio Parameter >> edit to setup frequency Setting (base high low frequencies)
Radio 1 also Radio 2 (different frequency channel)

Contoh Gambar Imam Way

Radio Parameter >> edit to setup frequency Setting (base high low frequencies)
Radio 2

Contoh Gambar Imam Way

 MRMC (Modulation) setup base on Frequencies bandwidth
Radio 1 & Radio 2 both MRMC setting

Contoh Gambar Imam Way

Select MRMC bandwidth

Contoh Gambar Imam Way

Click Configure Script >> Set Max Profile as per license plan

Contoh Gambar Imam Way

Management and Ethernet Service Configuration
The image below is a Service Point (Figure 2) on the Ethernet Service (Ethernet Service Figure 1).

Gambar 1

4 Gambar 2
Gambar 2

Contoh Gambar Imam Way

Ethernet Service Configuration
NMS Setting >> click add for Ethernet service and click service point

Contoh Gambar Imam Way

Ethernet Service Configuration
To create Ethernet Service, here are the steps :
1. Ethernet  Service
2. Add
3. Service Type P2P
4. Apply

3
1 2

Contoh Gambar Imam Way

Ethernet Service Configuration
Ethernet Service
The image below is inside a in Service Point.

Contoh Gambar Imam Way

Ethernet Service Configuration
Ethernet Service
The image below is a Service Point done for configuration.

Contoh Gambar Imam Way

Management Service Configuration
To create Ethernet Service, here are the steps :
1. Pre defined option  Option #8 PIPE, dot1q)
2. Interface Location  Choose Ethernet Slot 1, Port 2
3. Apply

3
2

Contoh Gambar Imam Way

Management Service Configuration
To create Ethernet Service, here are the steps :
1. Pre defined option  Option #1 (MNG, dot1q)
2. Interface Location  choose Multi Carrier ABC (PIPE, dot1q)
3. Apply

Contoh Gambar Imam Way

Interface Manager Configuration
Enable Ethernet port for NMS or Bandwith Testing
(Radio 1, Radio 2, Ethernet 1 and Multicarier ABC set to UP)

Contoh Gambar Imam Way

Interface Manager Configuration
Back to Point 1 for configuration opposite, after all configuration done.
Link ready to pointing and bandwidth testing.

Contoh Gambar Imam Way

Finish and Thank You

Imam Way