0% found this document useful (0 votes)
96 views17 pages

Smart Bird Feeder: 716. Yashashri Gosavi 717. Mangesh Gosavi 718. Aryan Goud 719. Kishan Goud 720. Payal Gupta

The document describes a smart bird feeder that collects data on bird populations and feeding habits using Sigfox technology. It consists of an Arduino MKR Fox 1200 module to communicate sensor data every hour including temperature, seed levels, and bird presence detected by an ultrasonic sensor. A photo resistor and LED indicate when the feeder is empty. Location is provided by Sigfox. Components would cost around 6,778 rupees to build. The smart feeder aims to help conserve declining bird populations by monitoring their environment and behavior.

Uploaded by

Kajal Goud
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
96 views17 pages

Smart Bird Feeder: 716. Yashashri Gosavi 717. Mangesh Gosavi 718. Aryan Goud 719. Kishan Goud 720. Payal Gupta

The document describes a smart bird feeder that collects data on bird populations and feeding habits using Sigfox technology. It consists of an Arduino MKR Fox 1200 module to communicate sensor data every hour including temperature, seed levels, and bird presence detected by an ultrasonic sensor. A photo resistor and LED indicate when the feeder is empty. Location is provided by Sigfox. Components would cost around 6,778 rupees to build. The smart feeder aims to help conserve declining bird populations by monitoring their environment and behavior.

Uploaded by

Kajal Goud
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 17

SMART BIRD

FEEDER
716. Yashashri Gosavi
717. Mangesh Gosavi
718. Aryan Goud
719. Kishan Goud
720. Payal Gupta
INTRODUCTION
• According to a CNRS study, the bird population is declining. This is a huge
problem for biodiversity and ecosystem.
• That’s why it is important to help bird populations and collect data on their habits
and environment.
• Smart bird feeders can be a solution, thanks to Sigfox technology, where
information is sent every hour.
• We can know the environment temperature, the amount of seeds left in the feeder,
and have statistics about feeder usage by birds.
COMPONENTS THAT ARE REQUIRED

• Arduino MKR fox 1200


• Ultrasonic sensor
• Photo resistor
• 5mm led
• Resistor 100 ohm
• Jumper wires
ARDUINO MKR FOX 1200
Communication module
• For the purposes of this project, we use an
Arduino MKR FOX 1200 module.
• This module is an Arduino electronic platform
integrating a Sigfox communication module and a
temperature sensor.
• Thanks to the Sigfox technology, it’s possible to
localize feeders with a sufficient precision.
Ultrasonic sensor
Ultrasonic sensor
• An ultrasonic sensor will evaluate the influence of
the feeder. With this sensor we can evaluate the
feeder usage by the birds. When they eat, birds are
in front of the sensor.
• The sensor make regular measurements to detect
bird presence.
LED and Photoresistor
• The led and photo resistor will allow us to know if the
feeder is empty.
• The led and the photo resistor are placed at the opposite of
the feeder where the seeds flows. If the photo resistance
detect the light of the led, the feeder is empty.

Temperature Sensor
• The temperature sensor is embedded in the MKR FOX
1200. It provides information about the environment in
which the feeder is installed.

 Location Sensor or GPS


• To reduce the cost of the feeder, we use location
capabilities of the Sigfox technology. It’s also possible to
have a more accurate localization by using a GPS module.
Steps and procedure of making the product
• A tank, which is a soda bottle, surrounded by rings to adapt it to the feeder
structure (black parts in the figure).
• The main feeder part, with two perches for birds. Several holes allow to place the
sensors and to pass the electric wires. (green in the figure)
• Boxes to enclose distance sensor, installed on front of the perches (orange in the
figure)
• Boxes to enclose sensor seed system, installed on the sides of the feeder (blue in
the figure)
• A box to enclose the sigfox communication module, under the feeder (yellow on
the figure)
Electronics scheme
Communication principle
• We use Sigfox to communicate.
• We don't need to send data all the time. To preserve battery, we only send a report each hour
and the size of the data is only 4 bytes. It's sufficient to have a feedback of specific
information.
Interface images
Pricing of components
• Arduino MKR fox 1200 : 4,599rs
• Sigfox antenna : 907rs
• Ultrasonic sensor (2) : 716rs
• Photo resistor (2) : 152rs
• 5mm led (2) : 30rs
• Resistor 100 ohm (4) : 60rs
• Jumper wires : 314rs
Total of the components are 6,778rs
Bird Buddy: A Smart Bird Feeder
Smart Bird Feeder with Camera, App Notification, AI Recognition and Automatic Bird
Sensing, Outdoor Wild Bird Feeder That can Identify Most Birds, Bird House Bird Feeder
with Built-in Microphone.

Functions:
• Auto-sensing function, Intelligent recognition function, Excellent shooting function and
built-in microphone, Support multi-device connection.

• Reference
• https://mybirdbuddy.com/
Bird Buddy
THANK YOU

You might also like