Scribd
Upload
70 views21 pages

Micro-Electro-Mechanical Systems (MEMS) : Presented by Akshayraj V.R MTM672

Micro-Electro-Mechanical Systems (MEMS) are devices between 1-100 micrometers that convert electrical and mechanical energy. They are made up of microsensors, microactuators, microelectronics, and microstructures. MEMS are fabricated using deposition, patterning, and etching processes. Common applications of MEMS include inertial sensors in smartphones, biomedical devices, and automotive sensors due to their small size, low power consumption, and ability to integrate electronics.

Uploaded by

Akshayraj Vr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
70 views21 pages

Micro-Electro-Mechanical Systems (MEMS) : Presented by Akshayraj V.R MTM672

Micro-Electro-Mechanical Systems (MEMS) are devices between 1-100 micrometers that convert electrical and mechanical energy. They are made up of microsensors, microactuators, microelectronics, and microstructures. MEMS are fabricated using deposition, patterning, and etching processes. Common applications of MEMS include inertial sensors in smartphones, biomedical devices, and automotive sensors due to their small size, low power consumption, and ability to integrate electronics.

Uploaded by

Akshayraj Vr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 21

Micro-Electro-Mechanical Systems

(MEMS)

Presented by
Akshayraj V.R
MTM672
Outline of The Presentation
- What Are MEMS?
- Components of MEMS
- Fabrication
- MEMS Operation
- Applications
- Summary
- 5 Key Concepts
What are MEMS?
• Made up of components between 1-100 micrometers in size

• Devices vary from below one micron up to several mm

• Functional elements of MEMS are miniaturized structures, sensors,


actuators, and microelectronics

• One main criterion of MEMS is that there are at least some elements that
have mechanical functionality, whether or not they can move
Components
Microelectronics:

• “brain” that receives, processes, and makes decisions

• data comes from microsensors


Microsensors:

• constantly gather data from environment

• pass data to microelectronics for processing

• can monitor mechanical, thermal, biological, chemical optical, and magnetic


readings
Microactuator:

• acts as trigger to activate external device

• microelectronics will tell microactuator to activate device


Microstructures:

• extremely small structures built onto surface of chip

• built right into silicon of MEMS


Fabrication Processes
Deposition:
• deposit thin film of material (mask) anywhere between a few nm to 100 micrometers onto
substrate

• physical: material placed onto substrate, techniques include sputtering and evaporation

• chemical: stream of source gas reacts on substrate to grow product, techniques include
chemical vapor deposition and atomic layer deposition

• substrates: silicon, glass, quartz

• thin films:polysilicon, silicon


dioxide, silicon nitride, metals,
polymers
Patterning:
• transfer of a pattern into a material after deposition in order to prepare for etching

• techniques include some type of lithography, photolithography is common

Etching:
• wet etching: dipping substrate into chemical solution that selectively removes material

• process provides good selectivity, etching rate of target material higher that mask material

• dry etching: material sputtered or dissolved from substrate with plasma or gas variations

• choosing a method: desired shapes, etch depth and uniformity, surface roughness, process
compatibility, safety, cost, availability, environmental impact
Fabrication Methods
Bulk Micromachining:
• oldest micromachining technology
• technique involves selective removal of substrate to produce mechanical
components
• accomplished by physical or chemical process with chemical being used
more for MEMS production
• chemical wet etching is popular because of high etch rate and selectivity
• isotropic wet etching: etch rate not dependent on crystallographic
orientation of substrate and etching moves at equal rates in all directions
• anisotropic wet etching: etch rate is dependent on crystallographic
orientation of substrate
Surface Micromachining:

• process starts with deposition of thin-film that acts as a temporary


mechanical layer (sacrificial layer)
• device layers are constructed on top
• deposition and patterning of structural layer
• removal of temporary layer to allow movement of structural layer

• benefits: variety of structure, sacrificial and etchant combinations, uses


single-sided wafer processing
• allows higher integration density and lower resultant per die cost
compared to bulk micromachining
• disadvantages: mechanical properties of most thin-films are usually
unknown and reproducibility of their mechanical properties
Wafer Bonding:

• Method that involves joining two or more wafers together to create a wafer
stack

• Three types of wafer bonding: direct bonding, anodic bonding, and


intermediate layer bonding

• All require substrates that are flat, smooth, and clean in order to be
efficient and successful
High Aspect Ratio Fabrication (Silicon):

• Deep reactive ion etching (DRIE)


• Enables very high aspect ratio etches to be
performed into
silicon substrates
• Sidewalls of the etched holes are nearly vertical
• Depth of the etch can be hundreds or even thousands of
microns into the silicon substrate
Benefits
• Much smaller area
• Cheaper than alternatives
○ In medical market, that means
disposable
• Can be integrated with electronics • Imperfect fabrication
(system on one chip) techniques
• Speed: • Difficult to design on micro
○ Lower thermal time constant scales
○ Rapid response times(high
frequency)
• Power consumption:
○ low actuation energy
○ low heating power
Where Are MEMS?
Smartphones, tablets, cameras, gaming devices,
and many other electronics have MEMS
technology inside of them
MEMS Operation
• Sensors & Actuators
• 3 main types of transducers:
o Capacitive
o Piezoelectric
o Thermal

• Additionally: Microfluidic
Inertial Sensors

MEMS Accelerometer MEMS Gyroscope


Biomedical Applications
● Usually in the form of pressure sensors
○ Intracranial pressure sensors
○ Pacemaker applications
○ Implanted coronary pressure measurements
○ Intraocular pressure monitors
○ Cerebrospinal fluid pressure sensors
Blood Pressure sensor
○ Endoscope pressure sensors on the head of a pin
○ Infusion pump sensors
● Retinal prosthesis
● Glucose monitoring & insulin delivery
● MEMS tweezers & surgical tools
● Cell, antibody, DNA, RNA enzyme measurement devices
In the Car
Additional Applications
• Optical MEMS
o Ex: optical switches, digital
micromirror devices (DMD), bistable
mirrors, laser scanners, optical
shutters, and dynamic micromirror
displays

• RF MEMS
o Smaller, cheaper, better way to
manipulate RF signals
o Reliability is issue, but getting there
Summary
Micro-Electro-Mechanical Systems are 1-100 micrometer
devices that convert electrical energy to mechanical energy
and vice-versa. The three basic steps to MEMS fabrication
are deposition, patterning, and etching. Due to their small
size, they can exhibit certain characteristics that their macro
equivalents can’t. MEMS produce benefits in speed,
complexity, power consumption, device area, and system
integration. These benefits make MEMS a great choice for
devices in numerous fields.
5 Key Concepts
1. MEMS are made up of microelectronics, microactuators, microsensors,
and microstructures.
2. The three basic steps to MEMS fabrication are: deposition, patterning,
and etching.
3. Chemical wet etching is popular because of high etch rate and
selectivity.
4. 3 types of MEMS transducers are: capacitive, thermal, and piezoelectric.
5. The benefits of using MEMS: speed, power consumption, size, system
integration(all on one chip).

You might also like