Building Services

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 11

BUILDING SERVICES

TOPIC: MOVING WALKWAYS


BELT CONVEYOR
SKY LOBBY

SUBMITTED BY:
SEJAL K. M.
3PD18AT047
MOVING WALK WAYS
 A MOVING WALKWAY, ALSO KNOWN AS
AN AUTOWALK,MOVING SIDEWALK,
MOVING PAVEMENT, PEOPLE MOVER,
TRAVOLATOR.

 MOVING WALKWAYS IS A SLOW


MOVING CONVEYOR MECHANISM THAT
TRANSPORTS PEOPLE ACROSS A
HORIZONTAL OR INCLINED
PLANE OVER A SHORT TO MEDIUM
DISTANCE.

 MOVING WALKWAYS CAN BE USED BY


STANDING OR WALKING
ON THEM
TYPES OF MOVING WALKWAYS

1.ACCORDING TO
INCLINATION ANGLE
– Horizontal and Inclined Walkways
a- Zero degrees inclination “Horizontal”
Moving Walkways.
b- Up to 15 degrees inclination “Inclined”
Moving Walkways.
ACCORDING TO THE FLAT MOVING SURFACE
a- Pallet Type:
A continuous series of flat metal plates mesh together
to form a walkway. Most have a metal surface, though
some models have a rubber surface for extra traction.

b- Moving Belt:
These are generally built with mesh metal belts or
rubber walking surfaces over metal rollers. The walking
surface may have a solid feel or a "bouncy" feel.

Both types of moving walkway have a grooved surface


to mesh with comb plates at the ends. Also, all moving
walkways are built with moving handrails similar to
those on escalators
ACCORDING TO THE SPEED
a- Slow- speed Standard type:
The speed of these walkways is determined by the need for safety
upon entry and exit, which generally limits it to approximately half
normal walking speed, or 30–40m/min. The slow speed of the
walkway causes impatience, and passengers often walk on the
walkway itself or on the adjacent floor rather use the slower
walkway.

b- High-speed walkways:
Using the high-speed walkway is like using any other moving
walkway, except that for safety there are special procedures to
follow when joining or leaving. On entering, there is a 10 m
acceleration zone where the "ground" is a series of metal rollers.
Riders stand still with both feet on these rollers and use one hand
to hold the handrail and let it pull them so that they glide over the
rollers. The idea is to accelerate the riders so that they will be
traveling fast enough to step onto the moving walkway belt. Riders
who try to walk on these rollers are at significant risk of falling over .
APPLICATIONS OF MOVING
WALKWAYS
 Moving walkways are commonly used in
larger airports.
 They can also be used in museum
exhibits.
 They are also used in zoos.
 They are used in the shopping malls,
supermarkets.
 Moving walkways are useful for remote
platforms in
underground subway/metro stations.
BELT CONVEYOR
Belt conveyor is an endless belt operating
between two or more pulleys with its load
supported on idlers.

CLASSIFICATION:

According to design & application


1.General purpose conveyor
2. Special purpose conveyor

According to profile path


1.Horizontal type
2. Inclined type
PARTS OF BELT CONVEYOR:

1. Belt
2. Drive mechanism
3. Pulleys
4. Idlers
5. Loading and discharging device
Advantages:
1. High load carrying capacity (up to 30000t/h)
2. Large length of conveying path (up to 3-4 km in single conveyor)
3. Simple design
4. Easy maintenance
5. High reliability for operation
6. More flexible

Disadvantages:
1. Vertical transportation can not be done.
2. A separate arrangement for material handling is required.
3. Hot materials can not be transported .
4. High initial cost for short distances
SKY LOBBY
A sky lobby is an intermediate interchange floor where
people can change from an express elevator that stops
only at the sky lobby to a local elevator which stops at
every floor within a segment of the building.

• For building > 40 levels.

• A group lift with high speed moving lift without


interruption from the floor to the sky lobby.

• The elevator will move with normal velocity at the next level
THANK YOU

You might also like