GOOD LABORATORY PRACTICE

(GLP)

B.Pharm IV th Year, Sem I Dr. IVL Padmini

Industrial Pharmacy-II Department of Pharmaceutics
 The birth of the GLP regulations

In the early 1970s, the conduct of non-clinical studies by

some test facilities raised much concern in the USA.
This led to the publication of the GLP regulations by the
USFDA in 1976, which in turn formed the basis for the
OECD (
Organisation for Economic Co-operation and Developm
ent
) principles of GLP established in 1978 under the
Special Programme on the Control of Chemicals.
Department of Pharmaceutics, MLRIP 2
 The primary aim

The driving force behind the GLP principles is the

need for concerted action amongst OECD Member
countries to protect man and the environment from
exposure to hazardous chemical.

Department of Pharmaceutics, MLRIP 3

 Good Laboratory Practice (GLP)
A quality system, concerned with the organizational
process and conditions under which non-clinical
health and environmental safety studies are
Planned
Performed
Monitored
Recorded
Archived
and
Reported
Department of Pharmaceutics, MLRIP 4
 GLP - Purpose
Promote development of quality test data

Mutual acceptance of data among countries on the basis

of comparable quality

Avoid duplicative testing, thereby saving time and

resources

Avoid technical barriers to trade

Improve protection of human health and environment

Department of Pharmaceutics, MLRIP 5

 GLP - Scope
Non-clinical safety testing of test item contained in
Pharmaceutical products
Pesticide products
Cosmetic products
Veterinary drugs
Food and feed additives
Industrial chemicals

The test items can be

Synthetic chemicals
Natural or biological origin
Living organisms Department of Pharmaceutics, MLRIP 6
 GLP – Non-clinical Studies

Toxicity studies
Mutagenicity studies
Pharmaco-kinetic and Metabolic studies
Physico-chemical studies
Analytical and Clinical chemistry studies
Environmental toxicity studies on aquatic and terrestrial organisms
Studies on behaviour in water, soil and air; biaccumulation etc.
Conducted in the laboratory, greenhouses and/or fields

Department of Pharmaceutics, MLRIP 7

 A Special GLP Definition

GLP is such a complex system of different types of

interlocking records that it is cheaper to do the work
than it is to attempt to fake it.
Message: Do not tell a lie to save yourself
Department of Pharmaceutics, MLRIP 8
WHY WAS GLP CREATED?
• In the early 70’s FDA became aware of cases of poor
laboratory practice all over the United States.
• FDA decided to do an in-depth investigation on 40
toxicology labs.
• They discovered a lot fraudulent activities and a lot
of poor lab practices.
• Examples of some of these poor lab practices found
were
1. Equipment not been calibrated to standard form ,
therefore giving wrong measurements.
2. Incorrect/inaccurate accounts of the actual lab study
3. Inadequate test systems

Department of Pharmaceutics, MLRIP 9

FAMOUS EXAMPLE
• One of the labs that went under
such an investigation made headline
news.
• The name of the Lab was Industrial
Bio Test. This was a big lab that ran
tests for big companies such as
Procter and Gamble.
• It was discovered that mice that
they had used to test cosmetics such
as lotion and deodorants had
developed cancer and died.
• Industrial Bio Test lab threw the
dead mice and covered results
deeming the products good for
human consumption.
• Those involved in production,
distribution and sales for the lab
eventually served jail time. 10
Department of Pharmaceutics, MLRIP
 Scope of the GLP Principles

• Non-clinical Testing to Assess Safety to Humans and

the Environment
• Applicable to the Testing of a Wide Range of
Regulated Commercial Products
• Both Synthetic Chemicals and Products of Biological
Origin
• Studies Conducted in the Laboratory, Greenhouses, and
the Field

Department of Pharmaceutics, MLRIP 11

 OBJECTIVES OF GLP

• GLP makes sure that the data submitted are a true

reflection of the results that are obtained during the

study.

• GLP also makes sure that data is traceable.

• Promotes international acceptance of tests.

Department of Pharmaceutics, MLRIP 12

 The GLP Principles
1. Test facility organization and personnel
2. Quality Assurance (QA) program
3. Facilities
4. Apparatus materials and reagents
5. Test systems
6. Test and reference items
7. Standard Operating Procedures (SOP’s)
8. Performance of the study
9. Reporting of study results
10. Storage and retention of records and materials

Department of Pharmaceutics, MLRIP 13

 1. Test Facility Organization and Personnel

• Test facility management’s

responsibilities
• Study director’s responsibilities
• Principal investigator’s responsibilities
• Study personnel’s responsibilities

Department of Pharmaceutics, MLRIP 14

 2. Quality Assurance Program
Responsibilities of the QA Personnel
• Designated individuals as members of the QA team directly
responsible to the management
• QA members not to be involved
in the conduct of the study being assured
• Access to the updated study plans and SOP’s
• Documented verification of the compliance of study plan to
the GLP principals
• Inspections to determine compliance of the study with GLP
principles. Three types of inspection
– Study-based inspections
– Facility-based inspections
– Process-based inspections

Department of Pharmaceutics, MLRIP 15

 3. Facilities
• Suitable size, construction and location
• Adequate degree of separation of the different
activities
• Isolation of test systems and individual projects to
protect from biological hazards
• Suitable rooms for the diagnosis, treatment and
control of diseases
• Storage rooms for supplies and equipment

Department of Pharmaceutics, MLRIP 16

• Separate areas for receipts and storage of the
test and reference items
• Separation of test items from test systems
• Archive facilities for easy retrieval of study plans,
raw data, final reports, samples of test items and
specimen
• Handling and disposal of waste in such a way not
to jeopardize the integrity of the study

Department of Pharmaceutics, MLRIP 17

 4. Apparatus, Materials and
Reagents
• Apparatus of appropriate design and adequate
capacity
• documented Inspection, cleaning, maintenance and
calibration of apparatus. Calibration to be traceable
to national or international standards
• Apparatus and materials not to interfere with the test
systems
• Chemicals, reagent and solutions should be labeled
to indicate identity, expiry and specific storage
instructions.

Department of Pharmaceutics, MLRIP 18

 5. Test Systems
• Physical and chemical test systems
– Appropriate design and adequate capacity of
apparatus used for the generation of data
– Integrity of physical/chemical test systems
• Biological test systems
– Proper conditions for storage, housing, handling and
care
– Isolation of newly received animal and plant test
systems until health status is evaluated
– Humanely destruction of inappropriate test systems

Department of Pharmaceutics, MLRIP 19

• Records of source, date of arrival, and arrival conditions
of test systems
• Acclimatization of biological systems to the test
environment
• Proper identification of test systems in their housing or
container or when removed
• Cleaning and sanitization of housings or containers
• Pest control agents to be documented
• Avoid interference from past usage of pesticides

Department of Pharmaceutics, MLRIP 20

 6. Test and Reference Items
• Receipt, handling, sampling and storage
– Records for date of receipt, expiry date, quantities
received and used in studies etc
– Handling, sampling and storage procedures to ensure
homogeneity and stability and avoid contamination or
mix-up
– Identification information on storage containers

Department of Pharmaceutics, MLRIP 21

• Characterization
– Identification of each test and reference item
• Code, CAS number, name etc
– Identification of each batch of the test or reference
items
• Batch number, purity, composition, concentration
etc
– Cooperation between the sponsor and the test facility
• Verification of identity of the test item

Department of Pharmaceutics, MLRIP 22

• Known stability of test and reference items
• Stability of the test item in its vehicle (container)
• Experiments to determine stability in tank mixers used in
the field studies
• Samples for analytical purposes for each batch

Department of Pharmaceutics, MLRIP 23

 7. Standard Operating Procedures
• Approved SOP’s to ensure the quality and integrity of
the laboratory data
• Immediately available current SOP’s relevant to the
activities being performed
• Deviations from SOP’s to be acknowledged by the
study director

Department of Pharmaceutics, MLRIP 24

• SOP’s for
– Test and reference items
• Receipt, identification, labeling,handling, sampling,
storage
– Apparatus
• Use, maintenance, cleaning, calibration
– Computerized systems
• Validation, operation, maintenance security, change
control, back-up
– Materials, reagents and solutions
• Preparation and labeling

Department of Pharmaceutics, MLRIP 25

• Record keeping, reporting, storage and retrieval
– Coding system, data collection, preparation of
reports, indexing system, handling of data
• Test system
– Room preparation, environmental room
conditions, receipt, transfer, identification etc, test
system preparation, observations etc,
• Quality Assurance Procedures
– Operation of QA personnel

Department of Pharmaceutics, MLRIP 26

 8. Performance of the Study
• Study plan
– Written plan, verified for GLP compliance, approved
by the study director and by the management
– Approval of amendments by dated signatures
– Deviations to be explained and acknowledged

Department of Pharmaceutics, MLRIP 27

• Content of the study plan
– Identification of the study
• Title, nature and purpose of the study, test item
identity, reference item used etc
– Information concerning the sponsor and facility
• Names and address (sponsor, test facility, study
director)
– Dates
• Approval dates of the study plan, estimated starting
and completion dates etc
– Reference to test methods
– Records

Department of Pharmaceutics, MLRIP 28

• Conduct of the study
– Identification of each study
– The study to be conducted in accordance with the
study plan
– Data generated to be recorded directly and accurately
– Changes in the raw data not to obscure the previous
data
– Identification of electronic data

Department of Pharmaceutics, MLRIP 29

 9. Reporting of Study Results
• General
• Final report for each study
• Scientists to sign and date their reports
• Approval by the Study Director
• Corrections, additions, amendments to be
signed and dated by the study director
• Content of the final report
– Identification of the study
• Descriptive title, identification of the test and
reference item, purity, stability.

Department of Pharmaceutics, MLRIP 30

 9. Reporting of Study Results
• Information on sponsor and test facility
– Name and addresses of the sponsor, test facility,
study director, the scientists involved to the study
etc)
• Experimental starting and completion dates
• A Quality Assurance Program Statement
• Description of materials and test methods
• Results
– Including uncertainties, level of significance
– Evaluation discussion and conclusions
• Storage (of samples, reference items, raw data, final
reports etc
Department of Pharmaceutics, MLRIP 31
 10. Storage and Retention of Records and
Materials
• What to retain in archives
– The study plan, raw data, samples
– Inspection data and master schedules
– Qualification, training experience, job description
– Maintenance and calibration data
– Validation data
– SOPs
– Environmental, health & safety monitoring records

Department of Pharmaceutics, MLRIP 32

• Retention period to be defined
• If any study material is disposed of before expiry the
reason to be justified and documented
• Index of materials retained in the archives
• Controlled access to the archives
• In case that the laboratory goes out of business the
archives are transferred to the relevant sponsors(s)

Department of Pharmaceutics, MLRIP 33

 Role of Regulatory authorities

Decision on approval or rejection of a chemical or any

product is based on the information given in the final
report

 final report is the most important ”end product” in

GLP!

Department of Pharmaceutics, MLRIP 34

Thank You

Department of Pharmaceutics, 35
MLRIP