Scribd
Upload
302 views12 pages

Interfacing The Led Using 8086 Microprocessor

This document discusses interfacing an LED to an 8086 microprocessor. It includes: 1. An introduction to the 8086 microprocessor and its features. 2. Details on interfacing an LED, including connecting the anode to ground and cathode to an 8086 pin. 3. A circuit diagram showing how to connect an LED to an 8255 interface chip connected to the 8086. 4. It concludes an assembly program will be written to turn the LED on and off using the 8086.

Uploaded by

Singarayya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
302 views12 pages

Interfacing The Led Using 8086 Microprocessor

This document discusses interfacing an LED to an 8086 microprocessor. It includes: 1. An introduction to the 8086 microprocessor and its features. 2. Details on interfacing an LED, including connecting the anode to ground and cathode to an 8086 pin. 3. A circuit diagram showing how to connect an LED to an 8255 interface chip connected to the 8086. 4. It concludes an assembly program will be written to turn the LED on and off using the 8086.

Uploaded by

Singarayya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

JEPPIAAR INSTITUTE OF TECHNOLOGY

“Self-Belief | Self Discipline | Self Respect”

Department of Electronics and communication Engineering

Subject Name : MICROPROCESSOR AND MICROCONTROLLER

Presentation Title: INTERFACING THE LED USING 8086 MICROPROCESSOR

Team Members:
Students Name Reg.No:
1. TONIE RAALPH .C 210617106081
2. ALWIN REVANTH.P 210617106007
3. KRISHNA KUMAR.S 210617106050
4. SANGAVI.L 210617106070
5. SURYA PRABHA.S.V 210617106078
OBJECTIVE:
Know that how to work a 8086 microprocessor
Show the different parts of a 8086 microprocessor
internal architecture
CONTENTS
 INTRODUCTION
 8086 TRAINER BOARD
 LED(light emitting diode)
 INTERFACING LED
 INTERFACING LED WITH 8086
 PIN ASSIGNMENT WITH 8086
 CIRCUIT DIAGRAM
 ASSEMBLY PROGRAM TO ON AND OFF LED USING 8086
INTRODUCTION
8086 MICROPROCESSOR:
 8086 microprocessor is the enhanced version of 8085 microprocessor. It
was designed by Intel in 1976.
 The 8086 microprocessor is a 16-bit, N-channel, HMOS microprocessor.
 Where the HMOS is used for "High-speed Metal Oxide Semiconductor".
 8086 is built on a single semiconductor chip and packaged in a 40-pin
ICpackage. The type of package is DIP (Dual Inline Package).
 8086 uses 20 address lines and 16 data- lines. It can directly address up to
 220 = 1 Mbyte of memory
 It consists of a powerful instruction set, which provides operation like
 division and multiplication very quickly.
Features of 8086 Microprocessor:
 
1. To improve the performance of this microprocessor there are two stages of
pipelining, which are fetching & execute stage.
 
2. The fetch stage can transfer the data in 6 bytes of instructions and stored in a line
 
3. The execute stage will execute the instructions
 
4. The 8086 microprocessor consists of 2900 transistors and it has 256 vectored
interrupts
 
5. It is the first 16-bit processor with 16 bit ALU & register, internal data bus and 16-bit
external data bus.
8086 TRAINER BOARD:
PS- TRAINER-8086 microprocessor trainer kit is proposed to smooth the
progess of learnng and developing designs of microprocessor from intel. It has the
facility to connect pc’s 101/104 keyboard, to enter the user program in assembly
languages. User verifies the program through LCD or PC , user friendly filmware
confirms facilitating the beginners learns operations of a microprocessor quickly.
LED ( light emitting diode):
light emitting diodes is the most commonly used comp[onents,
usually for displaying pins digital states. Typical uses of LEDs include
alarm devices, timers and confirmation of user input such as a mouse
click or keystroke.
INTERFACING LED:
fig.1 shows how to interface the LED to microprocessor. As you
can see the anode is connected through a resister to GND & the cathide is
connected to the microprocessor pin. So when the port pin is HIGH
the LED is OFF 7 when the port pin is LOW the LED is turned
ON.
INTERFACING THE LED WITH 8086:
we now want to flash a LED in 8086 trainer
boarde. It works by turning ON a LED & then turning it OFF &
then looping back to START. However the operating speed of
microprocessor is very high.
PIN ASSIGNMENT WITH 8086:
CIRCUIT DIAGRAM TO INTERFACE LED WITH 8255:
• ASSEMBLY PROGRAM TO ON AND OFF LED USING
8086:
CONCLUSION:
 With the output different input output modes
and control word format has been studied in this
experiment.
REFERENCE:
• Dougles v hall,microprocessor and interfacing.new
delhi:tat mc graw hill pvt.ltd.revised second edition
2010.
• Rk sharma,” a low cost seven display system”,IET
radio and electronic engineer,vol.41.pp.223-224
may 1971.

You might also like