Scribd
Upload
61 views

Network - Cabling Procedure Part 2

This document discusses network cabling and making connections with Cat5e cable. It lists common cable types including coaxial, fiber optic, and unshielded twisted pair (UTP). UTP cable characteristics and categories are described, with Cat5e supporting data transmission up to 1000Mbps. The steps for making connections with RJ45 connectors are provided, including stripping, arranging, and crimping wires according to the TIA/EIA 568A or 568B wiring standard. Proper tools and testing the connection are also covered.

Uploaded by

Jed Sorolla
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
61 views

Network - Cabling Procedure Part 2

This document discusses network cabling and making connections with Cat5e cable. It lists common cable types including coaxial, fiber optic, and unshielded twisted pair (UTP). UTP cable characteristics and categories are described, with Cat5e supporting data transmission up to 1000Mbps. The steps for making connections with RJ45 connectors are provided, including stripping, arranging, and crimping wires according to the TIA/EIA 568A or 568B wiring standard. Proper tools and testing the connection are also covered.

Uploaded by

Jed Sorolla
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

Network Cabling

Making connections with Cat5e


Way cool!
Overview
 What cable types are available?
 How do cables work?
 How are cables used in networking?
 How are connections made?
Learning Objectives
 List common cable types used in networking
 Describe how UTP cables are made
 Explain how UTP cables are used in Ethernet
networks
 Demonstrate the ability to make a working
patch cable
 Name the two wiring standards used for
wired Ethernet networks and their uses
Common network cable types
 Coaxial cable

 Unshielded
twisted pair

 Fiber optic
UTP characteristics
 Unshielded
 Twisted (why?) pairs of insulated conductors
 Covered by
insulating sheath
UTP categories
Category 1 Voice only (Telephone)

Category 2 Data to 4 Mbps (Localtalk)

Category 3 Data to 10Mbps (Ethernet)

Category 4 Data to 20Mbps (Token ring)


Category 5 Data to 100Mbps (Fast Ethernet)
Category 5e Data to 1000Mbps (Gigabit Ethernet)
Category 6 Data to 2500Mbps (Gigabit Ethernet)
Cat5e cable
 1000Mbps data capacity
 For runs of up to 90 meters
 Solid core cable ideal for structural
installations (PVC or Plenum)
 Stranded cable ideal for patch cables
 Terminated with RJ-45 connectors
RJ45 connector
Making connections - Tools
 Cat5e cable
 RJ45 connectors
 Cable stripper
 Scissors
 Crimping tool
Making connections - Steps
1. Strip cable end
2. Untwist wire ends
3. Arrange wires
4. Trim wires to size
5. Attach connector
6. Check
7. Crimp
8. Test
Step 1 – Strip cable end
 Strip 1 – 1½” of insulating sheath
 Avoid cutting into conductor insulation
Step 2 – Untwist wire ends
 Sort wires by insulation colors
Step 3 – Arrange wires
 TIA/EIA 568A: GW-G OW-Bl BlW-O BrW-Br
 TIA/EIA 568B: OW-O GW-Bl BlW-G BrW-Br
Step 4 – Trim wires to size
 Trim all wires evenly
 Leave about ½” of wires exposed
Step 5 – Attach connector
 Maintain wire order,
left-to-right, with RJ45
tab facing downward
Step 6 - Check
 Do all wires extend to end?
 Is sheath well inside connector?
Step 7 - Crimp
 Squeeze firmly to crimp connecter
onto cable end (8P)
Step 8 – Test
 Does the cable work?
Let’s go to work!

You might also like