Chapter-2 Par1

CHAPTER-2
CONSTRUCTION EQUIPMENT
PART-1 CONSTRUCTION EQUIPMENTS
1. Introduction
Classification of Construction Equipment
 Generally equipment types can be classified into Productive and
Support equipments.
equipments
I. Productive equipment are those units that alone or in
combination lead to an end product which can be recognized
as a unit for payment;
 Include pavers, haulers, loaders, rollers etc.
II. Support equipment are those equipments which are required
for operations related to the placement of construction such as
movement of personnel and materials, and activities that
influence the placement of environment.
 Include represented hoists, lighting sets, vibrators, scaffolds as
typical support equipments
3
1. Introduction
 Another way of classifying construction equipment can also be based
on whether the construction is a heavy or light construction works or

services.
I. Heavy:
Heavy Road and Hydro Power works, Large Irrigation
schemes, Water Supply and Sewage plants and High Rise
buildings and often called equipment intensive.
intensive
II. Light:
Light Low rise buildings, water supply and sewerage lines,
electric and telecommunication lines and small irrigation
schemes and called labor intensive services.
4
1. Introduction
 For the purpose of this course two major classifications of equipments
largely based on the type of works involved are covered.

I. Construction Equipment
 Earth works equipment: Bulldozers, Shovels, Clamshells and Draglines,
Loaders, Graders, Scrappers, Rollers, Drills, Grouting pumps, Pile driving
and Hammers.
 Hauling and Hoisting equipment - Tractors, Normal and Dump trucks,
Scrapers, Hoists, Conveyors and Cranes.
 Compaction and stabilization equipment-
equipment Compactors
 Foundation Equipment - Pile Driving Equipments
 Pumping Equipment - Pumps, Hoses, Pipes, and Compressors.
 Concreting equipment - Mixers, Vibrators
 Tunnelling equipment
 Drilling and blasting equipment
5
1. Introduction
II. Construction Plants
 Aggregate production plants,
 Crushers, Screens, Conveyors, and Feeders.
 Asphalt mixing plant and
 Aggregate Batchers, Bitumen Emulsifier, and
Mixers.
 Concrete Batching Plants
 Feeders, Mixers and Silos.
6
2. Earth Work Equipment
 Earth work includes:
 Site preparation, excavation, loading, hauling

 Embankment construction,
 Backfilling, dredging,
 Preparing base course, Sub-base and sub-grade,
 Compaction, road surfacing
 All the above works involve the use of a large number of highly
efficient and versatile equipment.
7
 Earth work equipments are broadly classified into earth moving,
compaction, grading and hauling equipment.

equipment
Earth Work
 Definition:-
Definition Earth work is a process of moving soil or rock from one
location to the other and processing it, so that it meets construction
requirements of location, elevation, density, moisture content, etc.
 The proper selection of these equipment and the length of time they
will have to be used are an essential part of the estimator’s work.
8
 Excavators A
 Loaders B
 Shovels
 Clamshells
 Draglines
 Scrapers
 Dumpers E
C
 Dozers
 Graders
 Rollers
D F
H
G
I J
2.1 Crane Shovel Family
 Common Features
 Mounting
 Crawlers/Tracks
 Wheels
 Superstructure or control room
 Front end attachment
11
A. Face Shovel
 Face shovel is an equipment used mainly in quarries, pits and on
construction sites to excavate and load blasted rock.
 These equipments are more effective for excavations above the wheel or
grade level.
 The basic parts of a power shovel include the mounting, cab, boom,
dipper stick, dipper (bucket), and hoist line.
 Optimum depth of cut: cut is that depth which produces the greatest
output and at which the dipper comes up with full load without undue
crowding.
 The depth varies with the class of soil and the size of the dipper.
 It may cost about 10 Million ETB
12
A. Face Shovel
 The output of a shovel is
affected by numerous factors,

including the following:
 Class of material,
 depth of cut,
 angle of swing,
 job conditions,
 management conditions,
 size of hauling units,
 skill of operator and
 physical condition of the
shovel. Wheel Grade Level
13
B. Drag Line
 Draglines are used to excavate earth and load it into hauling units,
such as trucks or tractors-pulled wagons, or deposit it into levees,

dams and spoil banks near the pits from which it was excavated.
 These equipment are more efficient for excavation below the grade
level and have the longest reach of all shovel equipment.

 A dragline can be used for dragging out sediments and is efficient for
under water construction.

 These equipment are weak while excavating hard materials and have
a lesser productivity than a face shovels.
14
B. Drag Line
 Basic Components of a drag line
15
B. Drag Line
 Types of Drag Lines:
Lines Drag lines may be divided into three types:
 Crawler-mounted
 Wheel-mounted, self-propelled
 Truck-mounted
 Crawler-mounted draglines can operate over soft ground conditions
that would not support wheel or truck - mounted equipment.

 The travel speed of a crawler machine is very slow, frequently
less than 1 mph,
 It is necessary to use auxiliary, hauling equipment to transport the
unit from one job to another.
 Wheel and track-mounted units may have travel speeds in excess of 30
mph.
16
B. Drag Line
Size of a Drag Line
 The size of a dragline is indicated by the size of the bucket, expressed
in cubic meter (cu m).

 Most draglines may handle more than one size bucket, depending on
the length of the boom utilized and the class and weight of the
material excavated.
 Since the maximum lifting capacity of a dragline is limited by the
force which will tilt the machine over, it is necessary to reduce the
size of the bucket when a long boom is used or when the excavated
material has a high unit weight.
 In practice, the combined weight of the bucket and its load should not
be greater than 75% of the force required to tilt the machine.
17
B. Drag Line
Operation of a Drag Line
18
B. Drag Line
Output of drug lines
 The output of drag lines will vary with the following factors
 Class of material
 Depth of cut
 Angle of swing
 Size and type of bucket
 Length of boom
 Method of disposal, casting, or loading
 Size of the hauling units, when used
 Skill of the operator
 Physical condition of the machine
 Job conditions
19
C. Clamshells
 Clamshells are used primarily for handling loose materials such as sand,
gravel, crushed stone, coal, etc. and for removing materials from inside
cofferdams, pier foundations, sewer manholes, sheet-lined trenches, etc.
 They are specially suited to vertically lifting materials from one location
to another, as in charging hoppers and overhead bins.

 The limits of vertical movements may be relatively large when they are
used with long crane booms.

 Clamshell buckets are available in various sizes, and in heavy-duty types
for digging, medium-weight types for general-purpose work and

lightweight types for rehandling light materials.

20
C. Clamshells
 Manufacturers supply buckets either with removable teeth or without teeth.
teeth
 Teeth are used in digging the harder types of materials but are not required
when a bucket is used for re-handling purposes.
21
C. Clamshells
 The capacity of a clamshell bucket is usually given in cubic meter.
 The variable factors affecting operations include:
 The difficulty of loading the bucket,

 The size load obtainable,
 The height of lift,
 The angle of swing,
 The method of disposing of the load, and
 The experience of the operator.
22
D. Hoes
 Hoes are used primarily to excavate below the natural surface of the
ground on which the machine rests.

 hoe is sometimes referred to by other names, such as backhoe or back
shovel.
shovel
 They are adapted to excavating trenches, pits for basements, and
general grading work, which requires precise control of depths.

 Because of their rigidity they are superior to draglines in operating on
close-range work and dumping into trucks.

 Because of the direct pull on the bucket, backhoes may exert greater
tooth pressures than face shovels.

 In storm drain and utility work the hoe can perform the trench
excavation and handle the pipe, eliminating a second machine.
23
D. Hoes
Basic component of backhoes
24
D. Hoes
Hoe Buckets
 There are special buckets for
everything from light sand to

hard rock digging.
Bucket option
Teeth option
25
D. Hoes
Hydraulic Hoes
 Bucket penetration (break out force) is developed by the hydraulic
cylinders of the boom,

boom stick and bucket.
bucket
Stick Bucket Boom
26
D. Hoes
Hydraulic Hoe Types
 The hoe can be track or wheel mounted
27
D. Hoes
28
Comparison between the shovel family
29
2.2 Heavy Earth moving Equipment
A. Excavators
 Replaced the cable operated crane shove family
 Excavators are basically digging machines, having the following three
main components
 An undercarriage to give mobility. This may be crawler track mounted
or wheel mounted.
 A superstructure with operator’s cabin mounted on either a slew ring to
traverse through 360° or on a rigid frame.
 Hydraulically articulated boom and dipper arms with bucket.
bucket
 Excavators are designed to excavate below the ground surface on which
the machine rests.

 Good mobility and versatility and excellent for general-purpose work,
such as excavating trenches and pits.
30
A. Excavators
Basic Parts of Excavator
31
A. Excavators
 Functions of excavators:
 Excavating – Earthworks
 Loading Excavated Material
 Scarification
 Making of Drains
 Advantages of hydraulic excavators include:
 Faster cycle time,

 Higher bucket penetrating force,
 More precise digging, and easier operator control.
 Many attachments can be made to increase the versatility of
the equipments.
32
A. Excavators
Types of excavators
 Excavators are of the following types based on the type of carriers on
which they are mounted:

I. Crawler mounted excavator
II. Truck mounted excavator
III. Self propelled excavator
IV. Excavators mounted on barge or rail
I. Crawler mounted excavator:
 These excavators are mounted on the crawler system and are very
suitable for carrying out large works in rough terrain.
33
A. Excavators
Types of excavators
I. Crawler mounted excavators:
 Crawler excavators have the following main
characteristics;
 Can be used for work on soft or wet grounds
 Can be used on sharp rocks or other adverse
conditions
 These can climb steep grades (even up to 40
percent)
 Requires very less turning space
 Have very less speed for travelling
 Can be shifted from one site to another only
on trailors
34
A. Excavators
Types of excavators
II. Truck mounted excavators:
 These excavators are mounted on truck chassis and has the
following main characteristics:

 High road speed and mobility is the main advantage.
 Lower stability over sides and hence require counter-weight or
outriggers.
 Require more operating space.
 Tyres or outriggers give high ground pressure and hence it
requires firm and smooth operating locations.
 Have two engines and two cabs, separately for truck chassis and
excavator.
35
A. Excavators
Types of excavators
III. Self propelled excavators:
 These excavators are self propelled and has rubber tyres. The main
characteristics are:
 Medium travel speed generally between 10-30 Km per hour.
 Has one engine and one cab for control by one operator.
IV. Excavators on barge or rail:
 These excavators are mounted on barge or rail to carry out work of
excavation in water or near railway line respectively.
36
A. Excavators
Common attachments
 Some common attachments include:
 Augers:
Augers Drills holes for poles, posts,
soil sampling, and ground
improvement
 Jack Hammer:
Hammer vibratory hammer used
to break up concrete and rock.
 Bucket Ripper:
Ripper The bucket sides and
bottom are lined with ripper teeth to
break up hard soil or soft rock.
 Thumb Bucket:
Bucket attached to bucket to
provide a hook capacity.
37
B. Loaders
 A bucket is attached to the arms and capable of being raised, lowered,
and dumped through mechanical or hydraulic controls.

 The loaders having bucket in the front, known as “ front end loaders”
loaders
are very common.
 The loaders are versatile, self propelled equipment mounted either on
crawler or wheel-type running gear.

 These are equipments used primarily:
 To load excavated materials to a hauling unit,

 Excavate soft to medium materials,
 Loading hoppers,
 Stockpiling materials,
 Backfilling ditches, and
 Moving concrete and other construction materials.
38
B. Loaders
Basic Parts of a loader
39
B. Loaders
Types of Loaders
 Loaders are of the following two types:
 Crawler loaders
 Wheel Loaders
40
B. Loaders
Types of Loaders
I. Crawler loaders
 Crawler track types are generally preferred for digging and loading
jobs where ground conditions are poor and low pressure

characteristics are required.
 They are preferable for applications involving rock and sharp stony
ground as there is no possibility of tyre damage.

 These are best employed for short moves between loading and
dumping points.
 They should be transported from one site to another after loading on
the trailors.
41
B. Loaders
Types of Loaders
II. Wheel loaders
 As a result of the development of more capable power trains (axel and
tires), there was a steady trend towards wheel loaders at the expense
of crawlers.
 Wheel loaders are generally four wheel drive.
drive However, for handling
light jobs on good ground conditions two-wheel drive varients are
also used.
 Four wheel drive loaders are generally used for construction jobs,jobs
whereas, two wheel drive loaders are used for bulk handling of coal,
cement, fertilizer etc.
42
B. Loaders
II. Wheel loaders
 From manoeuvrability point of view, wheel loaders are of
A. Articulated type (Pivot steer)

B. Rigid frame- two wheel steer or all wheel steer.
A. Articulated type of loaders
 They are hinged in the middle of the front and rear axels.
 Due to their operational characteristics and capability of working in
limited space and short turning radius,

radius resulting higher speed of
work, they have become popular.
 The articulation permits the loader to pivot 30-45 degree either side
of the center.
43
B. Loaders
II. Wheel loaders
A. Articulated type of loaders
 Some advantage of articulated type of loaders are:
 Quick manoeuvring and thereby easier spotting of loads

 Less rolling resistance on turns
 Better mobility on soft surface
 Give better performance and high productivity.
B. Rigid frame type loaders
 These are comparatively cheaper than articulated frame type of
loaders.
 Manoeuvring back and forth before dumping is required in most cases.
 Rigid frame loaders are of two types, namely two wheel steer and all
wheel steer.
44
B. Loaders
II. Wheel loaders
 Some models of wheel loaders are designed as a combination of a
backhoe and loader and often called backhoe loader.

loader
45
B. Loaders
Backhoe loader features
 Very common piece of equipment
 Many subcontractors own/lease
 Very versatile
 Easily transported
 “Low” maintenance costs
 Operator “friendly”
 Easily rented
46
B. Loaders
Operations
 Loaders are used to carry out the following main operations;
A. Loading
 Loading operation is the main operation performed by the loaders.
 Loading consists of scooping, lifting, turning and dumping materials
such as sand, gravel, and crushed materials from stockpiles, bank or

construction site into the hauling units.
B. Hauling
 Wheel loaders are excellent for moving loose materials over short
distances to dump into hauling units, hoppers, conveyors, bins, or any

other place of work in the construction site.
47
B. Loaders
Operations
C. Excavating
 Crawler loaders and heavy duty wheel loaders are excellent for many
excavation jobs.
 These loaders can excavate as well as lift the excavated material and
dump it into trucks or on the stockpiles

D. Clearing
 Loaders can scoop up and load the debris of demolished buildings into
hauling units.
 Loaders are the first equipment to prepare the site for building and
construction operations; and also the last equipment in order to

backfill, spread, level and top with selected good soil.
48
B. Loaders
Attachments
 The following are main attachments which can be fitted to a wheel
loader
a) Back filling attachment
 Back filling can be done with the bucket of this attachment when used
with the loader.

b) Forklift attachment
 An industrial forklift when attached with the loader gives more
stability, more tractive power and greater clearance than the normal.
c) Sweeping attachment
 A sweeping attachment can be fitted to a wheel loader for general
cleaning of roads and parking areas in the industries.
49
B. Loaders
Attachments
 The following are main attachments which can be fitted to a wheel
loader
d) Multi purpose bucket
 A multi purpose or four-in-one bucket can be used as a dozer, scraper,
clamshell and a general purpose loading.

e) Ripper-scarifier a attachment
 These are mounted on the rear of the loader to loosen hard surfaces.
f) Miscellaneous other attachments

 A large number of attachments for specialized jobs are also available
for fitting to the loaders. Some of these are pipe laying attachments,
pole handling attachments, boom for loader crane set up.
50
C. Dozers
 Dozers are machines designed primarily for cutting and pushing the
material over relatively short distance.

 They consist of a tractor equipped with a front–mounted
earthmoving blade controlled by hydraulic cylinders to vary the

depth of cut.
 A dozer moves earth by lowering the blade and cutting until a full
blade load of materials is obtained. It then pushes the material across

the ground surface to the required location.
 Rear mounted hydraulic scarifiers and rippers can be fitted to loosen
hard material prior to dozing.
51
C. Dozers
52
C. Dozers
Application of Dozers
 The following are the main dozer application
 Clearing land of timber and stumps,

 Opening up pilot roads through mountains and rocky terrain,
 Moving earth for the haul distances up to approximately 100m,
 Helping load tractor-pulled scrapers,
 Spreading earth fills,
 Backfilling trenches,
 Side hill cuts
 Clearing construction sites of derbies, and
 Maintaining haul roads.
53
C. Dozers
Moving earth Helping scrappers
54
C. Dozers
55
C. Dozers
Dozer Blades
 A heavy blade of slightly concave profile is attached in the front of
the tractor.
 The blades has a replaceable cutting edge,
edge which wears out with the
use of the blade.
 The dozer blades are available in sizes from 2m to 7.5m wide and
0.8m to 1.5m height.

height
 Dozer blades are of the following types:
A. U-Blade:
U-Blade Used for moving big loads over longer distances;
distances curved
shape and side and top extensions reduce the spillage of loose
material; best suited for lighter materials.
materials
56
C. Dozers
Dozer Blades
B. Straight Blade:
Blade Used primarily for shallow surface removal,
removal land
clearing; designed to push dirt for short distances, versatile,
lightweight and maneuverable, handles a wide range of materials.
C. Angle Blade:
Blade It is designed to move material towards the sides of a
cut, backfilling or cutting ditches, and sustainably reduces the amount
of maneuvering.
D. C (cushion Blade):
Blade) Used primarily with scrapers for ‘‘on the go’’
push loading; can be used for lighter excavation and other general
tasks.
E. Land fill Blade:
Blade These blades are specially designed to handle fill
material.
57
C. Dozers
Dozer Blades
U-Blade SU-Blade Carry Dozer “CD” Blade
Straight “S” Blade Power Angle &

Variable Radius
Tilt Blade
“VR” Blade
58
C. Dozers
Dozer Blades
Angle “A”-Blade Cushion “C”-Blade V-Tree cutter -Blade
Rakes K/G -Blade
59
C. Dozers
Blade adjustments
Tilting
Angle adjustment
60
C. Dozers
Blade adjustments
Angle adjustment (Top View)

Pitch adjustment
61
C. Dozers
Dozer Blades and Material Evaluation
 Besides job requirement, several other consideration determine choice
of attachment.
 Moisture content,
content particle size,
size and number of voids are the more
important characteristics influencing dozing performance.
a) Moisture content:
content If the moisture content increases above the
optimum, material becomes heavy and will thus have a negative
effect on dozing performance.
performance
b) Particle size:
size Large particles resist penetration more than smaller
ones, requiring more dozing power.
 Materials consisting of irregularly and sharp-edged particles are
more difficult to doze than material composed of round-edged
particles
62
C. Dozers
Dozer Blades and Material Evaluation
c) Voids:
Voids Relatively dense materials with few voids contain large
numbers of individual particles in close contact with each other .
Because of this more force is required to break up this tightly bonded
material.
63
C. Dozers
Rippers
 Crawler-tractor, mounted with ripper is finding increasing use in
construction, mining and quarrying.

 Characteristic of material to be ripped influence the selection of
ripper type;
type number of shanks required, ripping speed and amount
of ripper penetration.
penetration
Types of Rippers
A. Fixed multiple-shank ripper:
ripper used for comparatively simple ripping
operations.
B. Variable multiple-shank ripper:
ripper These are used where there are many
boulders, or where the quality of rock is not consistent.
64
C. Dozers
Types of Rippers
C. Fixed giant ripper:
ripper has only one single powerful shank, but is not
common as compared to variable giant rippers.
D. Variable giant ripper:
ripper has a single powerful shank . The angle of this
ripper can be changed according to the ground requirements.
65
C. Dozers
Types of Rippers
66
C. Dozers
Ripping Efficiency
 In order to achieve high ripping efficiency,
efficiency following suggestion
should be considered.
1) When material is not broken, loosen the surface in one direction,
then cross-ripping should be adopted.
2) If material is soft, use more than one shank ripper.
3) Ripping should be done downhill.
4) Avoid reversing when shank is in the ground.
5) For hard material, use shorter tips, and for ordinary work use
longest and sharpest point.
67
C. Dozers
Crawler Vs Tyre Tractors
A. Crawler Mounted tractors B. Wheel Mounted tractors
68
C. Dozers
 Each type of tractor has certain advantages in certain conditions.
 Advantages of crawler mounted tractors:
1) More tractive effort, hence can also operate on loose or muddy soil.
2) Can easily operate in rocky conditions.
3) Where maintenance of haul roads is difficult, it can easily travel,
especially in rough terrain.
4) Crawler tractors are more compact and powerful and hence can
handle difficult jobs as well.
5) Greater floatation because of the lower pressure under the trucks.
69
C. Dozers
 Advantages of wheel mounted tractors:
tractors
1) Can travel at higher speeds during operations and also from one job
to the other.
2) Ease in operation. Operator feels less fatigue.
3) Can travel on paved roads without damaging them.
4) Can travel long distances at its own power, whereas crawler
mounted needs trailors.
5) When work is spread over long area, these are found to be
producing more output.
6) Operation, maintenance and repair costs are less in wheeled tractor
as compared to crawler tractors.
70
D. Scrapers
 Scrapers are capable of excavating,
excavating hauling,
hauling and dumping material
over medium- to long-haul distances.
 The scrapers are designed to dig,
dig load,
load haul,
haul dump and spread and
sometimes called as carry all.
all
Types of scrapers
 The scrappers are of three types:
I. Towed scrapers:
 They are provided with either cable or hydraulic control.
 They are becoming obsolete.
 When coupled to a suitably powered crawler tractor, they can
operate in extremely adverse conditions.
 Travel at slower speed and can be used for short hauls only.
71
D. Scrapers
Types of scrapers
II. Self propelled or motorized or conventional scrapers:
 Generally manufactured in ranges from 10-20 cubic meters.
 Needs push loading by a crawler mounted or wheeled tractor.
 Have more hauling speed and hence are suitable for long distance
hauling .
III. Self loading or elevating scrapers:
 The problem of loading by a pusher is overcome by these type of
scrappers.
 These are twin engine scrappers and can work completely
independently of all other plants.
 Pay loads are restricted because of the additional weight of the
loading elevator and its drive system.
72
D. Scrapers
Types of scrapers
 Another classification method of scrapers
I. Push-loaded (Conventional):
 Single powered axel
 Tandem powered axels
II. Self loading:
 Push-pull, tandem powered axels
 Elevating
 Auger
73
D. Scrapers
Types of scrapers
Conventional (Push loaded)
Become uneconomical when
• Haul grades > 5%
• Return grades > 12%
Tandem powered Twin Engine

•Good for jobs having adverse grade
•Owning operating costs are about
25% higher
74
D. Scrapers
Types of scrapers
Push pull scrapers

 Can work as a team or operate
individually with a pusher.
 Tire wear will increase in rock or
abrasive materials.
Elevating scrapers
 Good for short hauls and in
favourable materials.
 Can work alone in the cut.
 Cost more initially and to operate.
75
D. Scrapers
Types of scrapers
Auger Scrapers
 Can self load in difficult
condition, laminated rock or
granular material.
 The augers add weight to the
scraper during travel and it is more
costly to own and operate than the
conventional.
76
D. Scrapers
Basic Parts of a scraper
 A scraper has the following main parts:
i. Bowl
 The bowl is a pan to hold the scraped dirt
 It is hinged at the rear corners to the rear axle inside the wheels, and
is capable of tilting down for digging or ejecting.
ii. Cutting edge
 The bowl has a cutting edge attached to the bottom.
 The cutting edge is lowered into the dirt to make a shallow cut.
iii. Apron
 This is a wall in front of the bowl, which opens and closes to
regulate the flow of the earth in and out of the bowl.
77
D. Scrapers
78
D. Scrapers
iv. Tail gate or ejector
 These are the rear of the pan which is capable of forward and
backward movement inside the bowl
79
D. Scrapers
Operation
 Operation of a scraper is described here under for an earth work:
i. Loading or digging
 The operator moves to the cut with the ejector at the rear and the
apron raised approximately to 40 cm.
 The bowl is then lowered to the desired depth of cut, increase engine
speed, move forward in first gear keeping optimum depth of cut.
 When the bowl is full, the apron is closed and the bowl is then raised.
ii. Transporting
 The bowl is transported in high gear in raised position to provide
sufficient clearance.
 During transporting, apron should be fully closed to prevent loss of
material
80
D. Scrapers
Operation
 Operation of a scraper is described here under for an earth work:
iii. Unloading
 The bowl should be positioned to spread the material to the desired depth
during this operation.
 A partial opening of the apron during the initial unloading will help in
even spreading.
 For wet and sticky material, the apron should be raised and lowered
repeatedly until the material behind it is loosened and drops out of the
bowl.
 Then the ejector is moved forward to push the remaining material out of
the bowl at a uniform rate.
 When the dump is complete, the tail gate is fully retracted, the apron
dropped and the ‘bowl’ raised to transporting position.
81
D. Scrapers
Operation
 Following are some of the suggestions for increasing scraper
production:
production
 Construct and maintain smooth haul roads for faster travel.
 Depth of cut should be according to the type of soil being cut.
 Use ripper teeth in hard or abrasive materials for easy handling.
 Where possible, loading be done in down grade
 To increase the stability of the scraper during travel, carry the
bowl as close to the ground as possible.
 If necessary pre-wetting of the soil is done so that the soil is
reasonably moist, as most soils load easily when they are moist.
 Whenever possible, plan the work to eliminate all avoidable turns.
82
2.3 Grading Equipment
Graders
 Grading is the process of bringing earth work to the desired shape
and elevation (grade).

 Motor graders are used for leveling and smoothening the earthwork,
spreading and leveling the base course in the construction of roads

and air fields.
 Motor graders can be used for the following types of works:
 Gravel road repairing

 Road shoulder reshaping, bank cutting and reshaping
 Ditch filling or digging
 Levelled or slopped ground finishing
 Base course spreading and levelling
 Material mixing, hard surface cutting, snow clearance,
 Land clearance, frozen top soil and asphalt breaking
83
Graders
Comparison with dozers
 A grader is restricted to making shallow cuts in medium-hard
materials.
 They should not be used for heavy excavations.
 A grader can move small amounts of material but cannot perform
dozer-type work because of the structural strength and location of its

moldboard.
 Graders can work on slopes as steep as 3:1.
 Grader are capable of progressively cutting ditches to a depth of 3 ft.
84
Graders
Basic parts of grader
 The components the grader that actually do the finishing are:
 Blade (Moldboard)
 Scarifier
 Rippers
Scarifier
log Rear
Ripper
Moldboard/
Circle Blade
85
Graders
Basic parts of grader
86
Graders
Blade
 The blade (Mould Board) is the main tool of the grader.
 It is carried by a rotating circle and is easily maneuverable to a wide
range of cutting positions with the help of hydraulic controls.

 The blade and the circle are mounted on a frame and is supported at the
front of the machine by a ball joint.

 The blade can be adjusted to any position with help of levers as
indicated below:
 Side shift:
shift the blade has Blade Sideshift Ram
 Lifting the blade:
blade The blade can be lifted or lowered by levers
operating the two rams.
 Rotating the circle:
circle A hydraulic motor is provided to rotate the circle
and blade. Blade can be rotated either in clockwise or counter
clockwise direction.
87
Graders
Blade
 Adjusting blade cutting angle (Blade pitch):
pitch) The vertical angle of
the blade can be adjusted.
88
Graders
Blade
89
Graders
Blade
Adjusting blade cutting angle
90
Graders
Blade
Adjusting blade cutting angle
91
Graders
Scarifier
 Scarifier is a special tool attached with the motor grader for loosening
the hard soil and has a set teeth mounted on adjustable shanks.
 This attachment digs up hard ground like asphalt, old pavement,
frozen surface and hard soil with vegetation and brushes which can
not be removed by the blade.
 The teeth are replaceable, and the number of teeth can be varied to
suit the ground hardness.

 High strength alloy steel tips can be mounted on the teeth to prevent
teeth wear and extend their service for economical performance.
92
Graders
Scarifier
93
Graders
Ripper
 The ripper is used to break up materials too hard to cut with
moldboard blade.
 The depth of cut is controlled by hydraulically operated ripper control
lever.
 Type of material to be ripped will determine position of the ripper
shank.
94
Graders
Various Operations
A. Grading:
 Grading in road construction means flattening and smoothening the
road surface and others by the scrapping action of the blade, includes
working operation like, surface skimming,
skimming light duty bulldozing,
bulldozing
leveling,
leveling spreading and crowning.
crowning
 A cutting depth of 2 to 3cm is considered to be the best for optimum
efficiency. Under no circumstances it should be greater than 5cm.

B. Spreading:
 Gravel together with binding material is spread by the motor grader.
 For spreading the cutting angle is set at 60° nearly.
 Cutting edge of the blade is set above the ground at a distance equal
to the depth to which the material is to be spread.
95
Graders
Various Operations
C. Finishing and Leveling:
 In final finishing and leveling, surface have to be finished to fine
limits.
 In such cases make the finishing pass with the blade only slightly
angled and set to skim the surface.

D. Ditch Digging:
 The front end of the blade is tilted down and the rear end is tilted up
above the road surface. The front end cuts into the ground.
 This is used to dig drainage ditches and road side ditches.
E. Cutting:
 For the purpose of cutting in soft dirt, set the blade to an angle b/n 40-
55 degree, while in hard dirt an angle of 30-45 degree is proper.
96
Graders
Various Operations
Laser Blade controls Ditch Cutting
97
2.4 Earth work Equipment Summary
98
 Choice of Excavation Equipment for Building Site Excavation
depends on:
 Size of the job: - Bucket Size and Number of Excavators
 Activity time constraints: - Number of equipment
 Availability of equipment:
 Cost of transportation of equipment:
 Type of excavation:
 Soil characteristics:
 Geometric characteristics of elements of the soil to be excavated:
 Space constraints:
 Characteristics of haul units:
 Location of dumping areas:
 Weather and temperature:
99
10
0
10
1
THANK YOU!
That’s all…
10
2

Chapter-2 Par1

Uploaded by

Copyright:

Available Formats

Chapter-2 Par1

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chapter-2 Par1

Uploaded by

Copyright:

Available Formats

CHAPTER-2

on whether the construction is a heavy or light construction works or

largely based on the type of works involved are covered.

 Site preparation, excavation, loading, hauling

efficient and versatile equipment.

compaction, grading and hauling equipment.

 It may cost about 10 Million ETB

affected by numerous factors,

such as trucks or tractors-pulled wagons, or deposit it into levees,

level and have the longest reach of all shovel equipment.

under water construction.

a lesser productivity than a face shovels.

that would not support wheel or truck - mounted equipment.

in cubic meter (cu m).

be greater than 75% of the force required to tilt the machine.

to another, as in charging hoppers and overhead bins.

used with long crane booms.

for digging, medium-weight types for general-purpose work and

when a bucket is used for re-handling purposes.

 The variable factors affecting operations include:

 The difficulty of loading the bucket,

ground on which the machine rests.

general grading work, which requires precise control of depths.

close-range work and dumping into trucks.

tooth pressures than face shovels.

excavation and handle the pipe, eliminating a second machine.

everything from light sand to

cylinders of the boom,

 Excavators are basically digging machines, having the following three

the machine rests.

such as excavating trenches and pits.

 Faster cycle time,

which they are mounted:

suitable for carrying out large works in rough terrain.

following main characteristics:

excavation in water or near railway line respectively.

and dumped through mechanical or hydraulic controls.

crawler or wheel-type running gear.

 To load excavated materials to a hauling unit,

jobs where ground conditions are poor and low pressure

ground as there is no possibility of tyre damage.

A. Articulated type (Pivot steer)

 Due to their operational characteristics and capability of working in

limited space and short turning radius,

 Quick manoeuvring and thereby easier spotting of loads

backhoe and loader and often called backhoe loader.

 Loading consists of scooping, lifting, turning and dumping materials

such as sand, gravel, and crushed materials from stockpiles, bank or

distances to dump into hauling units, hoppers, conveyors, bins, or any

dump it into trucks or on the stockpiles

construction operations; and also the last equipment in order to

with the loader.

cleaning of roads and parking areas in the industries.

clamshell and a general purpose loading.

f) Miscellaneous other attachments

material over relatively short distance.

earthmoving blade controlled by hydraulic cylinders to vary the

blade load of materials is obtained. It then pushes the material across

hard material prior to dozing.

 Clearing land of timber and stumps,