0% found this document useful (0 votes)
49 views10 pages

NCS21 - 03 - Describing Function Analysis - 01

The document discusses describing function analysis, which is used to predict the existence of limit cycles in nonlinear systems. It involves approximating the nonlinearity with a quasi-linear function and checking if the assumed periodic solution satisfies the system. This is illustrated using the Van der Pol equation, where the nonlinearity is approximated by a Fourier series to obtain the describing function. Describing function analysis can be applied to almost linear and genuinely nonlinear systems.

Uploaded by

zain khuram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
49 views10 pages

NCS21 - 03 - Describing Function Analysis - 01

The document discusses describing function analysis, which is used to predict the existence of limit cycles in nonlinear systems. It involves approximating the nonlinearity with a quasi-linear function and checking if the assumed periodic solution satisfies the system. This is illustrated using the Van der Pol equation, where the nonlinearity is approximated by a Fourier series to obtain the describing function. Describing function analysis can be applied to almost linear and genuinely nonlinear systems.

Uploaded by

zain khuram
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Describing function analysis

Limit cycles are oscillations of 2

fixed amplitude and period 0

-2

Undesirable in many cases -4


0 20 40 60 80 100

Prediction of existence of LC

Phase portraits Describing function analysis


Index Theorem

Bendixon Theorem
Application domain
Nonlinear
element Linear element

Almost linear systems

𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
Designed using linear control 𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
theory and then analyzed for +
hard nonlinearities. -
Genuinely nonlinear systems
Application domain
Nonlinear
element Linear element

Almost linear systems

𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
Designed using linear control 𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
theory and then analyzed for +
hard nonlinearities. -
Genuinely nonlinear systems
𝑢(𝑡) ~
𝑢(𝑡 )
0
~ + 𝐺𝑐 𝐺 𝑠 𝐺𝑝 (𝑠)
𝑥(𝑡) 𝑢(𝑡) 𝑤(𝑡 ) 𝑢(𝑡 )
𝐺𝑐 (𝑠) 𝐺𝑝 (𝑠)
𝑟 ( 𝑡 ) =0 𝑦 (𝑡 ) -

+
𝑟 ( 𝑡 ) =0
-
+
𝐺 𝑠 (𝑠) 𝑢(𝑡)
~
𝑢(𝑡 )
𝐺𝑝 (𝑠)
𝑦 (𝑡)
𝐺 𝑠 (𝑠) - 𝑥(𝑡)
𝐺𝑐 (𝑠)
Application domain
Nonlinear
element Linear element

Almost linear systems

𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
Designed using linear control 𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
theory and then analyzed for +
hard nonlinearities. -
Genuinely nonlinear
systems
Van der Pol Equation
𝑠 2 𝑋 ( 𝑠 ) −𝛼 𝑠𝑋 ( 𝑠 ) + 𝑋 ( 𝑠 )=𝛼 𝑊 ( 𝑠)
𝑥+𝛼
¨ ( 𝑥 − 1 ) 𝑥+
2
˙ 𝑥= 0
( 𝑠 2 −𝛼 𝑠+1 ) 𝑋 ( 𝑠 ) =𝛼 𝑊 ( 𝑠) 𝑤(𝑡) 𝛼
𝑥(𝑡)
2 𝑤= 𝑓 ( 𝑥)
𝑥¨ −𝛼 𝑥+
˙ 𝑥=− 𝛼 𝑥 𝑥˙ + ( 𝑠 2 − 𝛼 𝑠+1 )
− 𝑥 (𝑡)
𝑋 ( 𝑠) 𝛼 -
𝑥¨ −𝛼 𝑥+𝑥=𝛼
˙ 𝑤 = 2
𝑊 (𝑠 )   ( 𝑠 − 𝛼 𝑠 +1 )
𝑤=− 𝑥 2 𝑥˙
Basic Idea
Nonlinear
element Linear element
Assume a periodic solution
Approximate the nonlinearity
𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
with a quasi linear function
+
Check whether the assumed -
solution satisfies the system
Nonlinear
element Linear element

Basic Idea cos2 𝜔 𝑡=cos ( 𝜔 𝑡+𝜔 𝑡 )


𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
2 𝑟 ( 2𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
 Assume a periodic solution ¿ cos 𝜔 𝑡 −sin 𝜔 𝑡
+
¿ 1− sin2 𝜔 𝑡 − sin2 𝜔- 𝑡
 Approximate the nonlinearity with a quasi linear function
¿ 1− 2 sin2 𝜔 𝑡
 Check whether the assumed solution satisfies the system
2
Van der Pol Equation ⇒2 sin 𝜔 𝑡=1− cos2 𝜔 𝑡
− 𝑥 (𝑡) 𝑤(𝑡) 𝑥(𝑡)
¿ cos ( 2 𝜔 𝑡+𝜔
𝑤= 𝑓 ( 𝑡
𝑥) ) +cos ( 2 𝛼 𝑡 −𝜔𝑡 )
𝜔
2
𝑤 =− 𝑥 𝑥
˙ + ( 𝑠 2 − 𝛼 𝑠+1 )
( 𝑥 − 1 ) 𝑥+
¿cos2𝜔𝑡cos𝜔𝑡−sin2𝜔𝑡 sin𝜔𝑡
2
𝑥+𝛼
¨ ˙ 𝑥= 0 -
¿ − ( 𝐴 sin 𝜔 𝑡 ) ( 𝐴 𝜔 cos 𝜔 𝑡 )
2 2

𝑋 ( 𝑠) 𝛼
𝐺 ( 𝑠 )= = 2
𝑊 (𝑠)   ( 𝑠 − 𝛼 𝑠+ 1 )
(
¿ − 𝐴2
1 − cos 2 𝜔 𝑡
2 )( 𝐴 𝜔 cos 𝜔 𝑡 )

𝑤 = 𝑓 ( 𝑥 )=− 𝑥 2 𝑥˙
𝐴3 𝜔
¿− ( cos 𝜔 𝑡 − cos 2 𝜔 𝑡 × cos 𝜔 𝑡 )
2
Assume

𝑥 ( 𝑡 ) = 𝐴sin 𝜔 𝑡
¿−
𝐴3 𝜔
2 (
cos 𝜔 𝑡 −
cos 3 𝜔 𝑡 +cos 𝜔 𝑡
2 )
Nonlinear
element Linear element

Basic Idea
𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
 Assume a periodic solution
+
 Approximate the nonlinearity with a quasi linear function -
 Check whether the assumed solution satisfies the system

Van der Pol Equation


− 𝑥 (𝑡) 𝑤(𝑡) 𝛼
𝑥(𝑡)
𝑤= 𝑓 ( 𝑥)
𝑤 =− 𝑥 2 𝑥
˙ + ( 𝑠 2 − 𝛼 𝑠+1 )
𝑥+𝛼
¨ ( 𝑥 − 1 ) 𝑥+
2
˙ 𝑥= 0 -
¿ − ( 𝐴 sin 𝜔 𝑡 ) ( 𝐴 𝜔 cos 𝜔 𝑡 )
2 2

𝑋 ( 𝑠) 𝛼
𝐺 ( 𝑠 )= = 2
𝑊 (𝑠)   ( 𝑠 − 𝛼 𝑠+ 1 )
(
¿ − 𝐴2
1 − cos 2 𝜔 𝑡
2 )( 𝐴 𝜔 cos 𝜔 𝑡 )
𝑤=−
𝐴3 𝜔
( cos 𝜔 𝑡 − cos 3 𝜔 𝑡 )
4
𝑤 = 𝑓 ( 𝑥 )=− 𝑥 2 𝑥˙
𝐴3 𝜔 𝐴3 𝜔
¿− ( cos 𝜔 𝑡 − cos 2 𝜔 𝑡 × cos 𝜔 𝑡 ) 𝑤≈− cos 𝜔 𝑡
2 4
Assume
higher order harmonics
𝑥 ( 𝑡 ) = 𝐴sin 𝜔 𝑡
¿−
𝐴3 𝜔
2 (
cos 𝜔 𝑡 −
cos 3 𝜔 𝑡 +cos 𝜔 𝑡
2 ) are suppressed
Nonlinear
element Linear element

Basic Idea ( 1 − 𝜔2 ) + 𝑗 ( 𝛼 𝜔 ) 2
𝛼 𝑟 ( 𝑡 ) =0 𝐴 ( 𝑗𝑥(𝑡)
𝜔)
𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
1+ × =0 𝑤(𝑡) 𝑦 (𝑡)
 Assume a periodic solution ( 1 − 𝜔 ) + 𝑗 ( 𝛼 𝜔 ) ( 1 − 𝜔 ) − 𝑗 ( 𝛼 𝜔+ )
2 2
4
 Approximate the nonlinearity with a quasi2 linear function 2 -
( 1 − 𝜔 ) + 𝑗 ( 𝛼 𝜔 ) 𝛼 𝐴 ( 𝑗 𝜔)
 Check whether the assumed solution
1+ satisfies the system =0
2 2 4
( 1− 𝜔 ) + ( 𝛼 𝜔 ) 2

Van der Pol Equation 𝑥=𝐺 ( 𝑗 𝜔 ) 𝑤=𝐺 ( 𝑗 𝜔 ) 2𝑁 ( 𝐴 , 𝜔 ) ( − 𝑥 ) ( 𝛼 𝜔) 𝛼 𝐴 2 (𝜔)


( 1 − 𝜔2 ) 𝛼 𝐴 ( 𝑗 𝜔) 1− − 𝑥 (𝑡) 𝑤(𝑡) 𝛼=0 𝑥(𝑡)
=0 2 2 𝑤= 𝑓 ( 𝑥)
( 1 − 𝜔 ) +( 𝛼 𝜔 ) 2 4
2
( 1 − 𝜔 ) + ( 𝛼𝛼𝜔 )
2 2 4 2
𝐴 ( 𝑗 𝜔) + 2
( 𝑠 − 𝛼 𝑠+1 )
𝑥+𝛼
¨ ( 𝑥 − 1 ) 𝑥+ 2
˙ 𝑥= 0 𝑥= (− 𝑥 ) -( 𝛼 ) 𝛼 𝐴 2
( 𝑗 𝜔 ) 2 −𝛼 ( 𝑗 𝜔 ) +1 4
𝜔=0 , 𝜔=1 1− =0 4 𝛼2 − 𝐴 2 𝛼2=0
𝐴 𝜔 3
(𝛼 ) 2
4
𝑤≈− cos 𝜔 𝑡


2
4 𝛼 𝐴 ( 𝑗 𝜔) 𝐴=2
1+ =0
𝐴2 𝑑 ( 𝑗 𝜔 )2 −𝛼 ( 𝑗 𝜔 ) +1 4 − 𝑥 (𝑡) 𝐴2 𝑤(𝑡) 𝛼
𝑥(𝑡)
¿ ( − 𝐴sin 𝜔 𝑡 ) + 4
𝑠
( 𝑠 2 − 𝛼 𝑠+1 )
4 𝑑𝑡 2
𝛼 𝐴 ( 𝑗 𝜔)
1+ =0 -
2
𝐴 𝑑 ( 1 − 𝜔 ) −𝛼 ( 𝑗 𝜔 )
2
4
¿ ( − 𝑥 (𝑡 ) )
4 𝑑𝑡
⇒ 𝐴=2 , 𝜔=1
𝑤=𝑁 ( 𝐴 , 𝜔 ) ( − 𝑥(𝑡 ) ) Describing function: May depend
upon amplitude and frequency of
the input
Nonlinear
element Linear element

Basic Idea
𝑤=𝑓 ( 𝑥 ) 𝐺(𝑠)
𝑟 ( 𝑡 ) =0 𝑥(𝑡) 𝑤(𝑡) 𝑦 (𝑡)
 Assume a periodic solution
+
 Approximate the nonlinearity with a quasi linear function -
 Check whether the assumed solution satisfies the system

Van der Pol Equation 𝑥=𝐺 ( 𝑗 𝜔 ) 𝑤=𝐺 ( 𝑗 𝜔 ) 𝑁 ( 𝐴 , 𝜔 ) ( − 𝑥 )


− 𝑥 (𝑡) 𝑤(𝑡) 𝛼
𝑥(𝑡)
𝑤= 𝑓 ( 𝑥)
𝛼 𝐴 2 ( 𝑗 𝜔) + ( 𝑠 2 − 𝛼 𝑠+1 )
𝑥+𝛼
¨ ( 𝑥 − 1 ) 𝑥+
2
˙ 𝑥= 0 𝑥= (− 𝑥 ) -
( 𝑗 𝜔 ) 2 −𝛼 ( 𝑗 𝜔 ) +1 4
𝐴3 𝜔
𝑤≈− cos 𝜔 𝑡


4 𝛼 𝐴 2 ( 𝑗 𝜔)
1+ =0
𝐴2 𝑑 ( 𝑗 𝜔 )2 −𝛼 ( 𝑗 𝜔 ) +1 4 − 𝑥 (𝑡) 𝐴2 𝑤(𝑡) 𝛼
𝑥(𝑡)
¿ ( − 𝐴sin 𝜔 𝑡 ) + 4
𝑠
( 𝑠 2 − 𝛼 𝑠+1 )
4 𝑑𝑡 2
𝛼 𝐴 ( 𝑗 𝜔)
1+ =0 -
2
𝐴 𝑑 ( 1 − 𝜔 ) −𝛼 ( 𝑗 𝜔 )
2
4
¿ ( − 𝑥 (𝑡 ) )
4 𝑑𝑡
⇒ 𝐴=2 , 𝜔=1
𝑤=𝑁 ( 𝐴 , 𝜔 ) ( − 𝑥(𝑡 ) ) Describing function: May depend
It is more likely that a LC exists in upon amplitude and frequency of
the nonlinear system the input
Find describing function for the nonlinearity

Solve 1+𝐺 ( 𝑗 𝜔 ) 𝑁 ( 𝐴 , 𝜔 )=0 to find and

You might also like