Scribd
Upload
241 views1 page

BRE Table 1

This document appears to be a form for recording the mix design details for a concrete mix using the BRE method. It includes sections for specifying the target strength, cement properties, aggregate types and sizes, water-cement ratio, slump/workability, and calculations to determine the quantities of cement, water, fine aggregate and coarse aggregate required for a given batch size. The form allows recording the reference values, specifications and calculations to develop a mix design that meets strength, workability and proportion requirements.

Uploaded by

hajjiyare2016
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
241 views1 page

BRE Table 1

This document appears to be a form for recording the mix design details for a concrete mix using the BRE method. It includes sections for specifying the target strength, cement properties, aggregate types and sizes, water-cement ratio, slump/workability, and calculations to determine the quantities of cement, water, fine aggregate and coarse aggregate required for a given batch size. The form allows recording the reference values, specifications and calculations to develop a mix design that meets strength, workability and proportion requirements.

Uploaded by

hajjiyare2016
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Table 1.

Concrete Mix Design Form (BRE method) Job title:


stage item Reference or Values
calculation

1 1.1 Characteristic strength Specified ................................N/mm2 at.....................................days


Proportion defective ..........................................................%
1.2 Standard deviation Fig. 3 ....................................... N/mm2 or no data ............. N/mm2
1.3 Margin C1 (k=.............) ..................x..................=......................N/mm2

Specified ................. N/mm2


1.4 Target mean strength C2 .............................+.....................=.................... .........N/mm2

1.5 Cement strength class Specified 42.5/52.5


1.6 Aggregate type: coarse Crushed/Uncrushed
Aggregate type: fine Crushed/Uncrushed
1.7 Free‐water/cement ratio Table 2, Fig. 4 ...............................
Use the lower value ................
1.8 Max. Free water/cement ratio Specified ...............................
2 2.1 Slump or VeBe time Specified Slump .....................mm or VeBe time................................s
2.2 Max. Aggregate size Specified .........................mm
2.3 Free‐water content Table 3 ......................................................................................kg/m3

3 3.1 Cement content C3 ......................... / ............................. = ....................... kg/m3


3.2 Maximum Cement content Specified ..............................kg/m3
3.3 Minimum Cement content Specified ..............................kg/m3
Do not use less than 3.3 or more than 3.2 ........................................
kg/m3
3.4 Modified free‐water/cement
..........................................................................................................................
ratio

4 4.1 Relative density of


aggregate (SSD) ...................................................................known/assumed
4.2 Concrete density Fig. 5 ..............................
kg/m3
4.3 Total aggregate content C4 .................... ‐ ..................... ‐ .................... = ..............
kg/m3
5 5.1 Grading of fine aggregate Percentage passing 600 micron sieve ...............................................................%
5.2 Proportion of fine aggregate Fig. 6
......................................................................................%
5.3 Fine aggregate content ................................. x ............................ = .................kg/m3
C5
5.4 Coarse aggregate content ................................. ‐. ............................ = .................kg/m3
Cement water Fine aggregate Coarse aggregate (kg)
Quantities
(kg) (kg or lt) (kg) 10 mm 20 mm 40 mm

Per m3 (to
nearest 5 kg)
Per trial mix
of ............ m3

You might also like