Sybsc Botany Basics of Chromatography Paper 1 Sem1

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 24

M.

S COLLEGE OF ARTS, SCIENCE, COMMERCE AND


B.M.S

Basics of Chromatography
Introductory Principles
Chromatography is a combination of two words;
* Chromo – Meaning color
* Graphy – representation of something on paper
History of Chromatography

Chromatography, literally "color writing", was first employed by


Russian scientist Mikhail Tswett in 1903/1906. He continued to work
with chromatography in the first decade of the 20th century, primarily
for the separation of plant pigments such as chlorophyll
as  , carotenes
,  ,
and xanthophylls
and  . Since these components have different colors
(green, orange, and yellow,respectively) they gave the technique its
name.
It is a physical separation method of separation in
which the components of a mixture are separated by
differences in their distribution between two phases, one
of which is stationary (stationary phase) while the other
(mobile phase) moves through it in a definite direction.
The substances must interact with the stationary phase
to be retained and separated by it.
Definition of chromatography

IUPAC definition (International Union of pure and applied


Chemistry) (1993):
Chromatography is a physical method of separation in which
the components to be separated are distributed between two
phases, one of which is stationary while the other moves in a
definite direction.

The stationary phase may be a solid, or a liquid supported on a


solid or gel, the mobile phase may be either a gas or a liquid.
CHROMATOGRAPH
Y

 Analyze
Separate • Identify
• Purify

Components
• Quantify
Mixture
 Chromatograph: Instrument employed for a chromatography.

 Eluent: Fluid entering a column.

 Eluate: Fluid exiting the column.

 Elution: The process of passing the mobile phase through the column.

 Flow rate: How much mobile phase passed / minute (ml/min).

 Linear velocity: Distance passed by mobile phase per 1 min in the column (cm/min).
Mobile Phase – gas or liquid that carries the
mixture of components through the stationary
phase.
Stationary Phase – the part of the apparatus that
holds the components as they move through it,
separating them.
Uses for Chromatography
Chromatography is used by scientists to:
•Analyze – examine a mixture, its components, and
their relations to one another
•Identify – determine the identity of a mixture or
components based on known components
•Purify – separate components in order to isolate one of
interest for further study
•Quantify – determine the amount of the a mixture
and/or the components present in the sample
Examples of uses for chromatography:

Pharmaceutical Company
Hospital
Law Enforcement
Environmental Agency
Manufacturing Plant
Chromatogram:
It is the visual output of the chromatograph.

Chromatograph:
It is equipment that enables a sophisticated Separation.

Stationary phase (bounded phase):


It is a phase that is covalently bonded to the support particles or
to the inside wall of the column tubing.
Mobile phase:
It is the phase which moves in a definite direction.

Analyte (Sample):
It is the substance to be separated during chromatography.

Eluate:
It is the mobile phase leaving the column.
Retention time:
It is the characteristic time it takes for a particular analyte to
pass through the system (from the column inlet to the detector)
under set conditions.

Eluent:
It is the solvent that will carry the analyte.
Retardation factor (R):
Fraction of an analyte in the mobile phase of a
chromatographic system.
•Liquid Chromatography – separates liquid samples with a liquid
solvent (mobile phase) and a column composed of solid beads
(stationary phase)

• Gas Chromatography – separates vaporized samples with a


carrier gas (mobile phase) and a column composed of a liquid or of
solid beads (stationary phase)

•Paper Chromatography – separates dried liquid samples with a


liquid solvent (mobile phase) and a paper strip (stationary phase)

•Thin-Layer Chromatography – separates dried liquid samples


with a liquid solvent (mobile phase) and a glass plate covered with
a thin layer of alumina or silica gel (stationary phase)
GEL FILTRATION

 Gel filtration separates molecules according to the


differences in size as they pass through the filtration
medium packed in the column.
 It is well suited for biomolecules that are sensitive to
pH ,concentration and harsh environment.
 Parameters that affects gel filtration are, particle size,
flow rate, packaging density, porosity of the particle
and viscosity of the mobile phase.
MATERIALS REQUIRED

 Cross linked dextrans (sephadex)


 Agarose (sepharose)
 Polyacrylamide
 Porous glass gel.

APPLICATIONS
 Fractionation (purification of the desired protein using suitable
gel)
 Molecular weight determination
ION EXCHANGE
ION EXCHANGERS
• Cation exchangers (negative ions – stationary)
• Anion exchangers (positive ions - stationary)
Four types of polymers are commonly used. They are,
• Synthetic hydrophobic polymer resins crosslinked
with divinylbenzene.
• Naturally occuring as well as synthetic
polymers(cellulose)
• Synthetic hydrophilic polymers
• Silica gel
AFFINITY CHROMATOGRAPHY
THANK YOU

You might also like