Faults and Trouble Shouting in Complete Denture
Faults and Trouble Shouting in Complete Denture
Faults and Trouble Shouting in Complete Denture
Complete denture
Dr.M.Ezzat
Overview
the most frequently identified denture faults
are related to patient complaints
Deal with denture problems systematically
Use a differential diagnosis
Address probable causes until problem
eliminated If can’t identify problem,
refer to another speciality
there are opportunities for improvement in the
treatment of the edentulous population.
This may be achieved by adopting a broader
therapeutic strategy focused not solely on technical
aspects of an oral prosthesis. Instead, a wider array
of clinical features of the edentulous patient should
be addressed.
A contemporary strategy may include concerns
for prevention of tooth loss, evaluation of residual
alveolar ridge resorption, and related issues of
denture function, continual evaluation of oral
mucosal health, compassionate
management of maladaptive patients, a rationale for
timely replacement of dentures
Common faults of complete denture
construction
Poor retention(Denture looseness)
Base design )a( •
Overextension of denture bases — •
Underextension of denture bases — •
Poor tissue contact made )b( •
Lower denture base — •
Upper denture base — •
Both upper and lower denture bases — •
Inadequate post dam )c( •
Common faults of complete denture
construction
Incorrect jaw relationships
Anteroposterior relationships )a(
Posterior premature tooth contact —
Anterior premature tooth contact —
b) Incorrect occlusal vertical dimension •
Too small — •
Too large — •
At the time of examination, the patients’ comments regarding the adequacy of
.their dentures were recorded
Five divisions were used to group the various complaints the patients
.presented with
Those patients who stated that they experienced pain and discomfort on
inserting or removing the dentures or pain while at rest or in function were
”.grouped under “Pain
Those patients who experienced difficulties incising and masticating their food
or instability when in such function were grouped under
”.Eating“
Principle
Always have the patient
demonstrate how a
denture loosens
Denture Looseness
CD & RPD
Occlusion •
Denture base (fit & contour) •
Poor anatomy •
Denture Looseness
CD & RPD: Occlusion
Tuberosity
Inclined
Residual Ridge
Denture Looseness
CD & RPD: Occlusion
Tilting/jiggling caused
:by
Contacts not •
centered over
ridge
Contacts on •
inclined portion of
ridge
This patient had multiple sorespots associated with the denture, and previous
adjustments to the denturebases had not provided any relief. The denture midlines
are off, and the denture teeth in the second and third quadrants are meeting cusp
to cusp,which suggests that poor occlusion could be the cause of the patient
.problems
Denture Looseness
CD & RPD: Occlusion
Occlusion •
Denture base (fit & contour) •
Poor anatomy •
Denture Looseness
CD & RPD: Denture Base
Typical History
Loose/discomfort immediately on
insertion
:Clinically
Discomfort when press firmly on
1st molars
Pressure up/outward from lingual
of canine causes looseness
Denture Looseness
Mandibular lingual flange too
thick
Tongue
Tongue
Denture Looseness
CD & RPD: Denture Base
Short flange
PIP streaks •
Looks short of vestibule •
Often displaces easily •
Underextension
Fig. 3. Impression of mandibular denture bearing area was
used to fabricate study cast and periphery of planned new
denture was marked
Existing denture reseated on cast illustrates
underextension of borders
X-section through
Mandibular ridge
in 2nd Molar region
Buccal
A problem if
prominent or sharp Mylohyoid
Ridge
Attachments
To Hyoid
Denture Looseness
CD & RPD: Denture Base
Long flange
PIP burnthrough •
Retentive until •
speaking, eating
Watch when seating •
denture
Flange touches vestibular •
depth, denture continues
to seat
Denture Looseness
CD & RPD: Denture Base
Principle
Denture peripheries always terminate
on displaceable soft tissues
Retromolar pads, Vestibular tissues, Vibrating line
(nonmoveble soft palate), Hamular notches
Review of Indicating Media
Loney & Knechtel,J Prosthet Dent 2009;101:137-141
More the colour of indicating medium
than denture
Insufficient
Correct Amount Amount
with Streaks
Too Much
w/o Streaks
Fig. 6. Pressure disclosing cream applied to
tissue surface ofdenture base shows areas of
high pressure over retromolar pad
Fig. 7. Intraoral examination reveals expected
.ulceration aboveretromolar pad
Overextension of Denture Borders
Slight overextension is preferred to slight
underextension.
Remember, however, overextension is prejudicial to
denture retention.
To examine the lower denture for overextension:
Instruct patient to protrude tongue slightly until the
tip rests upon the lower lip
Place your index fingers on the occlusal surfaces of
the lower teeth to determine if the lower denture
remains firmly seated on the denture-supporting
structures
If the denture lifts, consider 3 possiblities:
Overextension in the region of the genioglossus
muscle (contracts w/ forward movement of the
tongue to dislodge denture) Anterior portion of
denture lifts
Overextension in the region of the premolar-molar
area (denture dislodges by contraction of
mylohyoid) Entire denture lifted from position
Overextension of the extreme distolingual border of
the lower denture (dislodgement of the forward
movement of the retromylohyoid curtain) Entire
denture dislodged from position and moved forward
• To test buccal and labial flanges of the lower
denture for retention, cheeks and lips are drawn
outward. Keep index finger of the other hand on
occlusal surface of the teeth on the same side. If
denture lifts, border may be overextended.
• Test buccal and labial flanges of the upper denture
for retention the same way except hold index finger
of the opposite hand in contact with palatal vault
Managing overextensions
Method 1 – Patient complaint Let the patient point to the area
:Problems with this technique
Patient may not point correctly to the area
Reductions are notcontrolled in amountor location
Not all overextensioncab be detected by this method
Method 2 – Indelible (Copier) pencil
Locate area of erythema or ulceration –
Mark it with copier (indelible) pencil –
Seat the denture and allow the copier –
pencil ink to imprint on the denture
Denture Looseness
CD & RPD: Denture Base
Periphery terminates on
bony structures Dry Mucosa
Hard palate –
Zygoma –
External oblique ridge –
Before retromolar pad –
No seal, discomfort •
Eventual resorption •
Denture Looseness
Denture Base: Coronoid Interference
Principle
Always have the patient rate
improvement (0-100) after
adjustment. If below 90%, more
diagnosis/adjustment is
required
Denture Looseness
CD & RPD
Occlusion •
Denture base (fit & contour) •
Poor anatomy •
Denture Looseness
CD & RPD: Poor Anatomy
Typical History
Adequate retention
initially
Gets worse with time
:Clinically
No discomfort when press
firmly on 1st molars
Interference
Swallowing •
Upper –
Over-extension in the posterior •
Too thick in posterior •
Lower –
Over-extension in the lingual •
Too thick lingual posterior flanges •
HTTP://www.rxdentistry.net
Instability
When not occluding •
Over-extension of border and posterior limit –
Under-extended border –
Loss of posterior palatal seal –
Posterior palatal seal on hard palate •
Posterior limit not in hamular notches •
Insufficient posterior palatal seal •
HTTP://www.rxdentistry.net
Instability
When not occluding •
Dehydration of tissues due to alcoholism –
HTTP://www.rxdentistry.net
Instability
When incising food •
Loss of posterior palatal seal –
Anterior teeth placed too far labially –
Poor denture foundation (flabby anterior tissues) –
Improper incising habits –
Neutral zone concept
Maximizing lower denture retention
Fig. 9. Harmonious tooth contact was established
after dentures were remade
Fig. 8. Anterior premature tooth contact and posterior tooth
disclusion is seen when patient is guided back to centric relation
position
• Faulty Vertical Dimension
• One of the most common denture faults
• Always check for this regardless of how remote the
patient’s complaint may be
• Vertical Dimension is a combination of relaxed muscles,
lips at rest, varying freeway space, harmony between
lower and middle 1/3 of the face, ability to speak
without bite rims contacting, tongue room for making
the "th" sound, satisfaction of the patient’s tactile
sense, and a consistent rest position measurement
• Two types of patient’s need a freeway space far in
excess of the 2 – 3 mm generally recommended
The patient accustomed to occluding in a very over- •
closed relationship for a long period of time (not a
good idea to open a patient 10 – 12 mm all in one
operation – important to rely on patient judgement,
too)
A good way to check VDO (provided the upper incisors are set in a
normal position) = Push the lower lip with your index finger with the
joints in centric occlusion. If the lower lip tends to slide under the
incisors instead of impinging on them the VDO is generally opened
too far ( however, horizontal overlap may do the same thing)
The "th" sound is a good phonetic cue to correct vertical dimension.
When the patient says words beginning with "th" his tongue should •
.pop forward between the bite rims
If the VDO is excessive, the forward movement of the tongue, is
restricted by the height of the rims or set teeth
FREEWAY SPACE
Measuring the occluding face height and the resting
face height should check the amount of freeway space.
In addition to measuring the freeway space, the clinician
should also assess this visually. If there is too much tooth
showing, or if the patient is struggling to put their lips
together, there may be insufficient freeway space. The
patient should be asked to speak and if their speech
sounds incorrect, this may indicate that there is
insufficient
freeway space. If there is too much freeway space,
then the patient will look over closed and will show too
Denture Pain:
Occlusal Vertical Dimension (OVD)
Insufficient OVD
lack of chewing power •
minimal ridge •
discomfort
angular chelitis •
:esthetic complaints •
chin prominent •
poor lip support •
Fig. 10. A, Frontal and B, profile views of patient demonstrating overclosure and collapse of
.nasolabial features due to VDO that is reduced
Fig. 11. Autopolymerizing acrylic resin has been added to mandibular posterior
denture teeth ( A) to reestablish esthetic (B) and physiologically (C) acceptable
.VDO
Denture Pain:
Occlusal Vertical Dimension (OVD)
Excessive OVD
Sore over entire ridge •
Gets worse during day •
Muscle/joint pain •
’Dentures ‘click •
Esthetic complaints: too •
full
Fig. 12. Anterior teeth have been set too far out into labial sulcus
(A) resulting in incompetence of the resting lips (B), and excessively
.full lip appearance (C)
A significant relationship was observed between
an unhealthy denture bearing mucosa and complaints
.relating to pain
The most frequently observed faults in denture
construction
related to retention, and vertical and horizontal
jaw relationships. There were significant relationships
between inadequate retention and improper
intermaxillaryrelationships and patient complaints of
loosenessand difficulty eating, respectively
Phonetic Problems
Lisping:
– too much overjet
– triangular spaces between max. & mand.
teeth
– palatal contour too constricted
– insufficient tongue space
Speech Problems
It takes patients from 2 – 3 weeks to accustom themselves to
dentures, so it is difficult to judge this early on, but some
things to think about are:
Patients are adaptable and generally will correct speech
difficulties (not directly related to technical error) within 2 or
3 weeks, so most patients can be assured they will get past
the difficulty
The pronunciation of the letter "s" is the most common speech
problem; the patient may even have involuntary hissing or
whistle. This can be caused by:
Rugae area too thick or too thin or the maxillary anterior teeth
may be set too far lingually. If the patient has a heavy
anterior ridge and the denture is thick, the rugae area should
be thinned to allow more space for air to escape. If the
anterior ridge is small and thin, likely too much air is escaping
and wax on the palatal surface should correct the problem
(autopolymerizing resin can then be added if the wax shows
this to be an effective correction
). If the maxillary anterior teeth are set too lingually, they
must be reset or you may try heavy festooning just
lingual to the teeth. If these remedies don’t work,
sometimes adding a median ridge will help.
Inability to speak clearly may be due to the lack of tongue
room posteriorly on the mandibular denture.
Overextension of the upper denture onto the soft palate
results in speech difficulties, as the patient has to make
a conscious effort to keep the denture in position
when talking
Complaints about the phonetics
with the dentures and causes
Whistle on “S” sounds •
Lips on “S” sounds •
Th” and “T” sounds indistinct“ •
”T” sounds like “Th“ •
F” and “V” sounds indistinct“ •
HTTP://www.rxdentistry.net
• Fullness under nose
• Depressed philtrum and/or nasolabial sulcus
• Upper lip sunken in
• Shows too much of the teeth
• Artificial look
• Whistle on "S" sound
• Lisp on "S" sound
• "Th" and "T" sounds indistinct
• "T" sounds like "Th"
• "F" and "V" sounds indistinct
HTTP://www.rxdentistry.net
Gagging with Dentures
:Solution
Check physiologic rest postion and •
phonetics carefully to confirm
Provide time to ensure no adaptation •
Reset teeth as adjustment alone •
usually not possible
Don’t Adjust Occlusion Intraorally
Net Result
Can’t see real Problem
Can’t eliminate the Problem
Adjusting Occlusion
Use an articulator •
Eliminates denture •
movement
Can visualize interferences •
easily
Saves time removing & •
replacing dentures
Pain: Occlusion
Clinical Exam
Patient •
demonstrates
problem by biting
where pain occurs
No contact on •
inclines of denture
bases
Pain: Denture Base
Retromylohyoid Overextension
Sore throat •
Denture moves when swallow •
From retromolar pad, flange •
should go straight down or
angle forward, never
backward
Avoid Impinging on the Mylohyoid
Ridge
X-section through
Mandibular ridge
in 2nd Molar region
Buccal
A problem if
prominent or sharp Mylohyoid
Ridge
Attachments
To Hyoid
Pain: Denture Base
Severe Tissue Undercuts
HTTP://www.rxdentistry.net
Sore spots
Single sore spots over ridge •
Malocclusion in that area –
Inaccurate denture base –
Bubbles of acrylic resin –
Generalized soreness over the ridge •
Vertical dimension too great –
Inaccurate denture base –
HTTP://www.rxdentistry.net
Sore spots
Soreness under lingual flange of lower
Centric occlusion not in harmony with centric, drives
lower denture forward
Over-extended lingual flange
Soreness under labial flange of lower
Too much overbite
Patient’s habit, wants to masticate in protrusive
Over-extended labial flange
HTTP://www.rxdentistry.net
Ulcers, sore spots or areas of hyperkeratosis on
the sides of the ridges, which are not
identified by pressure indication medium, are
.typically caused by tipping of the denture
Tipping is frequently associated with
occlusal problems
Areas of inflammation orulceration that are caused by the denture
base are often discrete and cannotbe distinguished from similar areas
.related to occlusal problems
The diagnosismust be established through the history, a clinical examination and
indicatingmedium. The definitive diagnosiis often determined by exclusion o
other possible causes
For pain related to occlusion •
Hurts only when chewing •
Gets worse with chewing •
Gets worse as the day progresses •
Patient may have to remove prosthesis late in •
the day because
of discomfort •
For pain related to denture base fit •
Problem starts when the patient inserts the •
denture, which often
feels tight or causes soreness •
Patient has discomfort even when not •
chewing
May or may not get worse as the day •
progresses
For pain related to occlusal vertical dimension (OVD)
)Insufficient OVD
Lack of chewing power
Minimal ridge discomfort
Angular cheilitis
Chin prominent
Minimal display of vermilion border
Excessive OVD
Soreness over entire ridge
Worse during the day (increased occlusal contact)
Dentures “click” when speaking
Mouth feels “too full,” patient has difficulty getting lips together
Tongue and cheek biting
Posterior teeth edge to edge •
Over-closure •
Posterior teeth too far lingual or buccal •
HTTP://www.rxdentistry.net
Burning sensation
Anterior hard palate and anterior alveolar •
ridge areas
Pressure on anterior palatine foramen –
Bicuspid area to molar tuberosity •
Pressure on posterior palatine foramen –
Lower anterior ridge •
Pressure on mental foramen –
HTTP://www.rxdentistry.net