Subnetting Problems

Subnetting Problems
• What is the Network ID, Broadcast Address,

First Usable IP, or Last Usable IP on the
subnetwork that the node 192.168.1.15/26
belongs to?
Step 1. Convert the shorthand subnet mask to decimal.
/26 = 255.255.255. + Two additional subnet bits.
Go to your cheat sheet, start at the bottom (128) and count up two, starting with 128. You should get to
192.
Thus, our decimal subnet mask is 255.255.255.192
Step 2. Determine the block size.

The block size is listed in the block size column parallel to your decimal mask.
The block size is 64.
Step 3. What is my Network ID?

Since we are working in the fourth octet and the block size is 64, the first network is 192.168.1.0.
Step 4. What is the next Network ID?

Again, we look at our block size of 64 to determine the next network is 192.168.1.64.
Network ID (First IP in the subnet): 192.168.1.0
Broadcast address (last IP in the subnet): 192.168.1.63
First Usable IP (the address after the network ID): 192.168.1.1
Last Usable IP (the address before the broadcast address): 192.168.1.62
• How many subnets and hosts per subnet can
you get from the network 192.168.1.0
255.255.255.224?
Step 1: Determine the classful mask.
192 = Class C
Class C default mask = 255.255.255.0
Step 2: Determine how many additional subnet bits exist beyond the classful boundary.
Since this is a class C address, we are only going to look at the fourth octet. Since the decimal mask is
224, we know there were three subnet bits added (counting up from the bottom of our cheat
sheet).
Step 3: Determine how many host bits remain.

We are still only working in the fourth octet. Since three bits went to the subnet instep 2, we have five
host bits (0's) remaining.
Step 4: Find the exponents of both subnet bits and host bits using the cheat sheet:
Subnet Bits = 2^3 = 8
Host Bits = 2^5-2 = 30
The answer is 8 subnets and 30 hosts per subnet
• You have been asked to create a subnet mask
for the 172.16.0.0 network. Your organization
requires 900 subnets, with at least 50 hosts
per subnet. What subnet mask should you
use?
Step 1: Determine how many subnet bits (1's), you have to add to the
classful boundary to cover the number of required subnets.
The IP address given was a class B address, making the first 16 subnet
bits static.
• Using the cheat sheet, find the exponent of 2 that is equal to or
greater than the number of subnets we require (900). We can
quickly see that 10 additional subnet bits will give us 1,024 subnets.
Make note of the corresponding subnet mask. In this case,
255.255.255.192. The third octet is eight 1's, and the four is two 1's.
We can count up from the bottom on our cheat sheet to get to 192.
Step 2: Confirm the number of remaining 0's will cover our required
hosts. In this case, there are 6 remaining 0's - 2^6-2=62, which is
more than enough for our host requirements.
Our subnet mask is 255.255.255.192. Giving us 1024 subnets and 62
hosts per subnet.
• You work for a large communications
corporation named GlobeComm which has
been assigned a Class A network address.
Currently, the company has 1,000 subnets in
offices around the world. You want to add 100
new subnets over the next three years, and
you want to allow for the largest possible
number of host addresses per subnet.
Which subnet mask would you choose?

• What is the network ID portion of the IP
address 191.154.25.66 if the default subnet
mask is used? What if /24 is used
• An organization is granted a block of
addresses with the beginning address
14.24.74.0/24. The organization needs to have
3 subblocks of addresses to use in its three
subnets: one subblock of 10 addresses, one
subblock of 60 addresses, and one subblock of
120 addresses. Design the subblocks
An organization is granted the block 130.56.0.0/16.
The administrator wants to create 1024 subnets.
• a. Find the number of addresses in each subnet.
• b. Find the subnet prefix.
• c. Find the first and the last address in the first
subnet.
• d. Find the first and the last address in the last
subnet

Subnetting Problems

Uploaded by

Copyright:

Available Formats

Subnetting Problems

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Subnetting Problems

Uploaded by

Copyright:

Available Formats

Subnetting Problems

• What is the Network ID, Broadcast Address,

Step 2. Determine the block size.

Step 3. What is my Network ID?

Step 4. What is the next Network ID?

Step 3: Determine how many host bits remain.

Which subnet mask would you choose?

You might also like