2107-616: Air Quality

Management
Lecture 6: Emission Inventory

อ.ดร. อัจฉริ ยา สุ ริยะวงค์

ภาควิชาวิศวกรรมสิ่ งแวดล้อม
คณะวิศวกรรมศาสตร์ จุฬาลงกรณ์มหาวิทยาลัย

1
Emission Inventory:
 What is an air emission inventory?
 Uses of emissions inventories
 Characteristics: base year, pollutants, source types
 Modeling Inventory needs: temporal and spatial
resolution, speciation
 Emissions inventory development
 Top-down vs. bottom-up
 Emission Inventory techniques (mass balance, source
testing, extrapolation)

2
What is an air emission inventory?
 Inventory - a comprehensive listing by sources of
air pollutant emissions in a geographic area
during a specific time period.

3
Uses of emissions inventories
 Emission inventories are used to help determine
significant sources of air pollutants, establish
emission trends over time, target regulatory
actions, and estimate air quality through computer
dispersion modeling.

 The development of a complete emission

inventory is an important step in an air quality
management process

4
Emission Inventory Characteristics:
 Base year
 Geographic area
 Pollutants
 Source Categories
 Modeling parameters
 Spatial resolution
 Temporal resolution
 Speciation

5
Emission Inventory Characteristics:
 Base Year
 Identifies the year for which emissions are
estimated
 Provides a benchmark for comparison with
previous and future inventories compiled for
different years
 Provides a common basis for all the emission
estimates
 Year is selected based on purpose of the inventory,
 regulatory requirements, and data availability

6
7
Emission Inventory Characteristics:
 Geographic Area
 Establishes geographic domain for the inventory
(can be based on political boundaries, i.e., city,
province, or country borders, air shed boundaries,
or others considerations)
 Is determined based on the purpose of the
inventory (City-, district-, province-level, national
analyses of air quality impacts (e.g., 100 to 500
km2) using modeling
 Determines the sources to be included in the
inventory based on their location
8
Emission Inventory Characteristics:
 Pollutants
 Is selected based on the purpose of the inventory
 Particulate matter analysis: PM10 and PM2.5, secondary aerosols
 Ozone analysis: NOx, VOC primarily (can include other carbon
compounds)
 Visibility analysis
 NOx, SOx, VOC, CO, PM10, PM2.5, NH3
 Elemental and organic carbon (EC/OC)
 Greenhouse gases assessment
 CH4, N2O, CO2
 HFC’s, PCF’s, and SF6
 Ozone depleting substances (ODS)
 CFC’s, HCFC’s, halons, CCl4, methyl chloroform
 (C2H3Cl3), methyl bromide (CH3Br)

9
Emission Inventory Characteristics:
 Source Categories
 Anthropogenic (man-made) and Natural sources may be included
in an inventory.
 Anthropogenic sources include:
 Stationary Point and Nonpoint sources

 Mobile Onroad and Nonroad sources

 Natural sources include:

 Biogenic emissions from vegetation
 Geogenic emissions from soil, volcanoes, and geothermal

 Activities
 Wildfires and wind erosion are classified as either

anthropogenic or natural by different countries

 Indoor and Other source categories
10
Emission Inventory Characteristics: Source Categories

 Point Sources
 Emissions may be released from large or small
point sources.
 Examples include electrical generating facilities,
chemical manufacturing plants, secondary
metal smelters, etc.
 Emissions may be released from: equipment leaks,
transfer of materials from one location to another,
or emissions stacks or vents

11
Emission Inventory Characteristics: Source Categories
 Nonpoint Sources
 Stationary industrial, commercial, institutional
facilities and businesses that are too small or
numerous to be categorized as a point source.
 Examples: dry cleaners, gasoline stations
 Nonpoint sources emit over a geographic “area”
versus point sources that emit over a geographic
“point”
 Examples: residential cooking and heating, wind
erosion of vacant lots and agricultural lands, dust
from vehicle travel over paved and unpaved roads,
consumer solvent use, wildfires
12
Emission Inventory Characteristics: Source Categories

 Mobile Sources
 Pollutants: VOC, PM, CO, Lead, NOx, SO2
 Greenhouse Gases: CO2, N2O, CH4
 20 volatile organic and metal air toxics
 Diesel particulate matter and diesel exhaust

organic gases
 Includes Onroad and Nonroad Sources

13
Emission Inventory Characteristics: Source Categories
Mobile Sources: Onroad
 Onroad - Vehicles found on roads and highways.
 Fuel types - Vehicles may operate on any fuel, including
petrol, diesel, propane, methanol, and electricity
 Vehicle classifications depend on methodology used to
estimate emissions:
 Passenger vehicles, trucks and vans
 Heavy duty trucks with trailers
 Buses and motor homes
 Taxis
 Two and three-wheeled vehicles designed for onroad use
 Emission Types include: Exhaust emissions and
Evaporative emissions
14
Emission Inventory Characteristics: Source Categories
 Mobile Sources: Nonroad - Mobile sources not
found on roads
 Specific categories of nonroad sources vary between
inventories
 Aircraft (may be included in nonpoint sources)
 Locomotives (may be included in nonpoint sources)
 Boats and other marine vessels (may be included in
 nonpoint sources)
 2/4 stroke engines in construction, industrial, and agricultural
equipment, lawn and garden equipment, etc.

15
Emission Inventory Characteristics: Source Categories

 Mobile Source Considerations

 Contribution by source category varies geographically
 May be defined by regulations
 Detail needed: County level, Pollutants, Process
description (for example, SCC)

16
Emission Inventory Characteristics: Source Categories
 Natural Sources
 Natural biological and geological phenomenon
which generate air emissions (nonanthropogenic)
 Biogenic emissions: VOC emissions from
vegetation
 Geogenic emissions:
 NOx emissions from soil (denitrification)

 SOx emissions from volcanoes and geothermal

activity
 • May include wind erosion, wildfires

17
Emission Inventory Characteristics: Source Categories

 Indoor Sources
 Indoor air can become
contaminated from
numerous sources
 Indoor air can have
significantly higher
concentrations of air
pollutants than outdoor
air

18
Emission Inventory Characteristics: Source Categories

 Other Types of Sources

 There are a number of other important sources of air
pollutants that aren’t so easy to categorize or count
 Accidental releases
 Long-range transport of air pollutants
 Historical background (for example, carbon tetrachloride)

19
The Big Picture for Modeling

20
Emissions Inventory
 Development Approaches
 Top-Down approach

 Bottom-Up approach

21
Top-Down Approach
 Methodology:
 General emission factors combined with high

level (national) activity data (e.g., emission

factor x national coal consumption) to estimate
emissions in country or region
 National- or regional-level emissions estimates

scaled to the inventory

 Domain based on surrogate data (geographic,
demographic, economic data)

22
Top-Down Approach
 Typically used when
 Local data are not available

 The cost to gather local information is

prohibitive
 Advantages: Requires minimum resources
 Disadvantages:
 Emissions generally have high level of

uncertainty
 Loss of accuracy in emission estimates

23
Bottom-Up Approach
 Methodology
 Uses source-specific data (for point sources)

and category-specific data at the most

refined spatial level (for nonpoint and
mobile sources)
 Emission estimates for individual sources

(and source categories) are summed to

obtain domain-level inventory

24
Bottom-Up Approach
 Typically used when:
 Source/category-specific activity or emissions data

are available
 End use of inventory justifies the cost of collecting

site-specific data (e.g., for ozone control strategy

demonstration)
 Advantages: Results in more accurate estimates than
a top-down approach
 Disadvantages: Requires more resources to collect
site-specific information than a top-down approach
25
Emission Estimation Techniques
Source Sampling

Emissions Model

Emission Factors
Increasing Cost

(Process-based)

Surveying

Material Balance

Emission Factors
(Census-based)

Extrapolation

Increasing Reliability of Estimate

26
 How Do I Choose Emission Estimation
Methods?
Choice of methods depends on:
 Pollutant and source category priorities
 Intended use of the inventory

 Resources

 Availability of data

 Compromise between method accuracy and

cost to implement

27
 Source Category Estimation Methods
 Point Source Methods  Nonpoint Source Methods
 Continuous Emission  Surveys and
Monitor (CEM) questionnaires
 Source tests  Material balance
 Material balance  Emission factor x
 Emission factor x activity factors
activity factors  Emission models
 Fuel analysis  Mobile Emission models
 Emission estimation
models
 Engineering judgment

28
Estimation Methods: A Continuous
Emission Monitoring (CEM) System
 Sampling is continuous
 CEMs measure and record actual
emissions during the time period
the monitor is operating and the
data produced can be used to
estimate emissions for different
operating periods.

 CEMs can be required by permit conditions

for some pollutants

29
Estimation Methods: Source Sampling
 Short term emission measurements typically taken
from a stack or vent
 Includes:
 Individual test at facility
 Testing at similar facilities
 Pooled source testing
 Sampling can be infrequent

30
Estimation Methods: Source Sampling
 Emission rates generally reported as concentrations
which must be converted to mass units for use in
emission inventories
 Summarize emissions for each pollutant in terms of:
 Mass loading rate
 Emission factor
 Flue gas concentration
 Results depend upon air pollution control device
performance and design
 Screening measurements can be indicators of
emissions, potential compliance issues
31
Estimation Methods: Fuel Analysis
Used to predict emissions based on the application
of conservation laws
E = Qf x Pollutant in fuel x (MWp/MWf)
where:
Qf = throughput of the fuel, mass rate (e.g. lb/hr)
MWp = molecular weight of pollutant emitted (lb/lb-
mole)
MWf = molecular weight of pollutant in fuel (lb/lb-mole)

32
Estimation Methods: Emissions
Models
Used when
 Calculations are very complex
 Combination of parameters has been identified that

affect emissions, but individually, do not provide a direct

correlation
 Used to calculate emission factors or mass emissions for
specific source categories
 Examples: Mobile exhaust and evaporative emissions,

storage tank evaporation and breathing losses, VOCs

from wastewater treatment facilities

33
Estimation Methods: Emissions
Models
 Generally require that a significant amount of
information be known about the source(s)
being estimated
 Examples: meteorological conditions in

the source area, tank capacity and color,

amount and chemical make-up of wastes
treated
 Mechanistic and multivariate models

34
Emissions Models
 U.S. EPA models include:
 TANKS - volatile liquid storage tanks
(http://www.epa.gov/ttn/chief/software/tanks/index.html)
 WATER9 -wastewater treatment
(http:/www.epa.gov/ttn/chief/software/water/index.html)
 MOBILE6 – onroad motor vehicles
(http://www.epa.gov/otaq/mobile.htm)
 LandGEM -landfills
(http://www.epa.gov/ttn/catc/products.html#software)

35
Emission Factors
 Definition: a ratio that relates the quantity of a
pollutant released to a unit of activity

 Allow development of generalized estimates of

typical emissions from source categories or
individual sources within a category

 Estimates the rate at which a pollutant is released

to the atmosphere as a result of some process

36
Types of Emission Factors
 Process-Based Emission Factors

 Census-Based Emission Factors

37
Calculating Emissions Using Emission Factors
 Emissions = EF × AD × (1 – CE/100)
Where:
EF = emission factor
AD = activity data (throughput)
CE = overall control efficiency (%) = (CAP × CON)/100
 CAP = % of the emissions stream captured by the control
 CON = % of pollutant removed from the emissions stream
 Activity data
 Process weight rates = Mg/year, kg/hour, liter/hour
 Fuel consumption rates = BTU/year, kJ/hour
 Can be expressed in terms of production rates

38
Example:
Estimate VOC Emissions from Industrial Fuel Combustion
Given:
 Quantity of fuel used = 10,000,000 liters/year
 VOC emission factor = 88 kg/106 m3
 CAP = 80% and CON = 90%

39
Example: Estimate VOC emissions from industrial fuel
combustion
 Given:
Quantity of fuel used = 10,000,000 liters/year
VOC emission factor = 88 kg/106 m3
CAP = 80% and CON = 90%
 Solution:
 Estimate overall control efficiency
CE = (80 x 90)/100 = 72%
 Convert fuel used in liters/year to m3 : 10,000,000/1,000 = 10,000
m3
 Calculate annual emissions
Emissions = EF × AD × (1 – CE/100)
Þ 88 kg/106 m3 x (10,000 m3/106) x (1 – 72/100)
Þ = 0.25 kg/year
40
Surveying
 Questionnaires are used to collect activity, controls,
and emissions data from specific source types,
categories
 Can be used to either:
 > Collect all information including emissions estimates and
necessary data fields
 > Collect activity data and information about facility and its
operations
 If emissions are not included as part of survey,
agency develops emission estimates using activity
data collected by survey and emission factor data or
source test data
41
Estimation Methods: Material Balance
 Used:
 When source test data, emission factors, or other
developed methods are not available
 Where accurate measurements can be made of all
process parameters
 For processes where material does not react to form
secondary products or does not undergo significant
chemical change
 For processes like solvent degreasing operations, and
surface coating operations

42
Estimation Methods: Material Balance
 Approach considers all inputs of a material and all possible
fates for the material after passing through the process,
including direct air emissions, fugitive air emissions, solid and
liquid waste streams, and residual product content
 Uses measurements of various components of a process to
determine air emissions:
 Air emissions = Input – liquid emissions – solid wastes – products – by
products – recycled material
 Commonly used to estimate emissions from solvent usage
based on contents of various solvents
 Solvent degreasing operations
 Surface coating operations

43
Examples of Material Balance

44
Estimation Methods: Engineering
Judgment (Extrapolation)
 Described can be used to generate accurate
emission estimates
 Provides an “order of magnitude” estimate with significant
uncertainty
 Scaling emissions estimates to create another inventory
 Using scaling parameters
 Production quantity
 Material throughput
 Land area
 Number of employees
 Population

45
Summary: Emission Inventory
Fundamentals
 Inventories are the fundamental building blocks of
any air quality management program and are used
for a variety of purposes
 Inventory characteristics (e.g., year, pollutants,
sources, spatial and temporal resolution) are
determined by the uses of the inventory
 Modeling inventories have more specific
requirements than more general tracking
inventories

46
Summary: Emission Inventory
Fundamentals
 Emission Inventories can be developed using a
top-down or bottom-up approach.
 A variety of emission estimation methods exist
and are determined by the inventory uses,
pollutant and source category priorities, resources,
and data available
 Compromise between method accuracy and cost
to implement

47