Scribd
Upload
298 views1 page

Project Poster 1

This document describes a gesture-based home automation system for physically disabled people. The system uses an APDS-9960 sensor connected to an Arduino board to detect gestures and control four home appliances - two 15W bulbs, a 12V DC fan, and a DC motor. A display shows the user which appliances can be selected and controlled by swiping and moving their finger to turn devices on and off. The goal is to design a useful system that allows disabled users to control home appliances through hand gestures detected by the sensor.

Uploaded by

Vasudhaa Suresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
298 views1 page

Project Poster 1

This document describes a gesture-based home automation system for physically disabled people. The system uses an APDS-9960 sensor connected to an Arduino board to detect gestures and control four home appliances - two 15W bulbs, a 12V DC fan, and a DC motor. A display shows the user which appliances can be selected and controlled by swiping and moving their finger to turn devices on and off. The goal is to design a useful system that allows disabled users to control home appliances through hand gestures detected by the sensor.

Uploaded by

Vasudhaa Suresh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 1

GESTURE BASED HOME AUTOMATION SYSTEM FOR PHYSICALLY DISABLED

VICTORINE.T.A 20MEC033
Department of Electronics and Communication Systems, Sri Krishna Arts and Science College, Coimbatore- 641008 .

INTRODUCTION BLOCK DIAGRAM CIRCUIT MODEL OUTPUT IMAGE

 Home Automation is the .


new trend in the consumer
market. There are many
home automation systems
with different features and
facilities.
 This system is designed
(which is controlled by  In this block diagram, the
gestures) to control four
system consists APDS-
appliances – Two 15Watt WORKING
9960 sensor which is
bulb, a 12V DC fan and a  The user can select the
connected to the
DC motor. appliance to be controlled
respective Arduino CONCLUSION
through a display which
board.
shows the list of appliances The goal of this project is to
 The sensor relates to the
in a dragable fashion. design a useful and fully
Arduino board and it  The user can swipe through
collects the data and functional real-world that
the devices by moving a
make the home appliance finger in left or right
efficiently translates the
to work. The sensor has direction and switch movement of hand to
on-chip UV and IR appliance ON or OFF by electrical signals that can
blocking filters. moving a finger in an control the home appliances.
upward or downward
direction.
`

You might also like