GOOD MORNING
DESIGN AND DEVELOPMENT OF
AUTOMATED CONVEYOR SYSTEM FOR
MATERIAL HANDLING
Presented by
xxxxxxxxxxxxxxxxxxx
XXXXXXXXXXXXXX
xxxxxxxxxxxxxxxxxxxxxxxx
Under the guidance of
Mr. XXXXXXXXXXXX
Mechanical Department
xxxxxxxxxxxxxxxxxxxxxxxxxxxx
ABSTRACT
Expanding competitive situation world wide is driving need for increase
need for better / finer control. Increased measurement / sensing nodes
we move to higher performance “Smarter” transducers. Portable
applications are growing, driving the need for lower power more energy
efficient sensors and measurement systems. Increased need in system
diagnostics to reduce maintenance driving the need for more process
measurement.
The aim of the project is to identify and eliminate a defected job in the
conveyor system before assembly. This project describes current research
on a sensor based inspection system. This project is used in
industries for eliminating and ejecting the defective parts during
manufacturing.
INTRODUCTION
A conveyor system is a common piece of mechanical
handling equipment that moves materials from one location
to another.
Conveyors are especially useful in applications involving the
transportation of heavy or bulky materials. Conveyor
systems allow quick and efficient transportation for a wide
variety
of materials, which make them very popular in the
material handling and packaging industries.
Many kinds of conveying systems are available, and are
used according to the various needs of different industries.
There are chain conveyors, belt conveyors, roller
conveyors, bucket conveyors etc.
PROJECT PLAN
Collecting data's about conveyors
Study the different kinds of sensors used for fault
detection
Collecting the material
Fabricate the system
Check the performance
SCOPE OF THE PROJECT
The scope of this project is to get familiarized with the
modern field of system and to find the technology
know -how. Also here we are using the sophisticated
emerging technology -embedded system.
BELT CONVEYOR
APPLICATIONS
Materials Handling
Industrial system applications
Machining
Welding
Handling
Trimming and Sealing
Packing system
Need of the project
This system is used for eject the particular colour damaged or
rejected part in a conveyor system.
Some industrial works are harmful for humans this system is
mainly used for reduce the risk process and consuming time
and avoid labours.
BLOCK DIAGRAM
Motor with pulley
system
Conveyor belt
Moving of components
Defective part (black colour) Sensor
Ejection of part
Stepper motor on
conveyor
Battery
COMPONENTS
230 V AC ELECTRIC MOTOR
12 V DC MOTOR
PULLEY SYSTEM
CONVEYOR BELT
12V LEAD ACID BATTERY
IMAGE COLOUR SENSOR
SENSOR USED
Image sensor
An image sensor is a device that converts an optical
image into an electronic signal.
It is used mostly in digital cameras, camera modules and
other imaging devices.
Early analog sensors were video camera tubes; currently
used types are semiconductor charge-coupled devices
(CCD) or active pixel sensors in complementary metal–
oxide–semiconductor (CMOS) or N-type metal-oxide-
semiconductor (NMOS, Live MOS) technologies.
ADVANTAGES
Human are tired for hard work such as assembly line,
material handling etc. this system does all those things it
mainly reduces the manual work our system is designed
at low cost as well as high efficient one.
This project is to give the way for providing bigger
effective system for industrial applications.
THANK YOU SO MUCH
