SAINIK SCHOOL GOPALGANJ

• GRAVITATION
• CLASS-IX
• BY- Dr A K Choubey
 GRAVITATION

Johannes Kepler Sir Issac Newton

(1571-1630) (1643 -1727)
Created by Dr A K CHOUBEY
 1. Gravitational Force or Gravity
2. Newton’s Universal Law of Gravitation
3. Properties of Gravitational Force
4. Universal Gravitational Constant
5. Kepler’s Laws of Planetary Motion
6. Newton’s II & III Laws and Gravitation
7. Free Fall
8. Acceleration due to gravity
9. Equations of Vertical Motion
10. Mass and Weight
11. Thrust and Pressure
12. Pressure in Fluids and Buoyancy
13. Archimedes’ Principle
14. Principle of Floatation
15. Density and Relative Density
Created by Dr A K CHOUBEY
 Gravitational force of the earth or Gravity
A force is necessary to produce motion in a body.
A body dropped from a height falls towards the earth. It indicates that the
earth exerts a force of attraction (called gravity) on the body.
In fact, the earth attracts all the objects towards its centre.
The force with which the earth pulls the objects towards it is called the
gravitational force of the earth or gravity.
The gravitational force between the sun and the earth keeps the earth in
uniform circular motion around the sun.

The gravitational force of the earth (or gravity) is responsible –

for holding the atmosphere above the earth

for the rain falling to the earth
for flow of water in the rivers
for keeping us firmly on the earth,
for the revolution of moon around the
earth, etc.
 NEWTON’S UNIVERSAL LAW OF GRAVITATION
Every body in the universe attracts every other body with a force which is
directly proportional to the product of their masses and is inversely
proportional to the square of the distance between them.
The direction of force is along the line joining the centres of the two
bodies.

m1 r m2

Let two bodies A and B of masses m1 and m2 are placed at a distance of ‘r’
from each other. Let ‘F’ be the force of attraction between the bodies.
Then,
(i) the force of attraction is directly proportional the product of their
masses

i.e. F α m1 x m2
(ii) the force of attraction is inversely proportional the square of the distance
between 1
i.e. Fthem
α
r2
 m1 x m2
Fα
r2
m1 x m2
or F=G where G is a constant called as
r2 “universal gravitational constant”

Properties of gravitational force

1. Gravitational force is the weakest force in nature.
2. It is an attractive force. (Unlike electrostatic and magnetic force;
are both attractive and repulsive)
they
3. It is a mutual force. (First body attracts the second body and the
second body attracts the first body with equal force)
4. It is a central force. (Acts along the line joining the centres of the
bodies)
5. It is mass and distance dependent.
6. It obeys inverse square law.
7. It is a long range force. (It decreases with distance as per inverse square
law and becomes zero only at infinite distance – like electrostatic and
magnetic force)
8. It does not depend on the medium between the interacting bodies.
 Universal Gravitational Constant (G)

r2
G=F
m1 x m2

• The value of Universal Gravitational Constant G is 6.67 x 10-11 N m2 Kg-2.

• The value of G does not depend on the medium between two bodies.
• The value of G is same throughout the Universe and hence the name.
•Universal Gravitational Constant G is different from acceleration due to
gravity g. Therefore correct symbol must be used accordingly.
• SI unit of G is N m2 Kg-2.
• If two bodies of mass 1 kg each are separated by 1 m from each other,
then, G = F.
* Therefore, Universal gravitational constant G is numerically equal to the
force of gravitation which exists between two bodies of unit masses kept at
a unit distance from each other.
Gravitational force is the weakest force of all.
If two bodies of mass 1 kg each are separated by 1 m from each other,
then, F = G = 6.67 x 10-11 N

Though the various objects on this earth attract one another constantly, they
do not cause any visible motion because the gravitational force of attraction
between them is very, very small.

Imagine a situation on the earth if the objects continuously move towards

each other due to gravitational force between them !

When both the objects are very big, having very large masses, then the
gravitational force of attraction between them becomes extremely large.

The gravitational force due to earth on an object of mass 1 kg placed on the

ground is 9.8 N.

The gravitational force between the earth and the moon even at a large
distance is very large and is 2 x 1020 N.
KEPLER’S LAWS OF PLANETARY MOTION
I LAW (Law of orbits):
Every planet moves around the sun in elliptical orbit with the sun at one of
the foci of the elliptical orbit.

Sun

F2
F1

Elliptical Orbit

PLANETS IN ORDER
II LAW (Law of areas):
The line joining the planet to the sun sweeps over equal areas in equal
intervals of time.

Elliptical Orbit
Sun B
Perigee S Apogee
F2
F1 A

Area of SAB = Area of SCD (For the

given time)
II law tells us that a planet does not move with constant speed around the
sun. It speeds up while approaching the nearest point called ‘perigee’ and
slows down while approaching the farthest point called ‘apogee’.
Therefore, distance covered on the orbit with in the given interval of time at
perigee is greater than that at apogee such that areas swept are equal.
III LAW (Law of periods):
The square of the time period of revolution of a planet around the sun is
directly proportional to the cube of the mean distance of a planet from the
sun.

The law is mathematically expressed as

T2 α r3
T2
or = constant
r3
Though Kepler gave the laws of planetary motion, he could not give a theory
to explain the motion of planets.
Only Newton explained that the cause of the motion of the planets is the
gravitational force which the sun exerts on them.
Newton used Kepler’s III law to develop the law of universal gravitation.
 Newton’s II and III Laws and Gravitation
According to Newton’s third law and universal law of gravitation, every
object attracts every other object with gravitational force. These forces
are equal and opposite.
Therefore, both the objects must be moving towards each other due to
force.
However, due to very weak nature of force, the normal sized bodies are not
seen moving towards each other.
What happens when a ball is dropped from a certain height from the
ground?
Ball is seen falling towards the earth but the earth is not seen jumping

Ao
t cwcaorrdintghetobNale.lwWtohny’s?second law,

Force = mass x acceleration

i.e. F = ma
Let ‘M’ and ‘m’ be the mass of the earth and the ball respectively and ‘A’ and
‘a’ be the acceleration of the earth and the ball respectively.
F
By= Newton’s
MA = ma third law, or a=
F and A = F
For the given force F, the ball experiencesmlarger accelerationM due to smaller
mass but the earth experiences negligibly small acceleration due to larger mass.
FREE FALL
When a body falls from a height towards the
earth only under the influence of the
gravitational force (with no other forces acting
on it), the body is said to have a free fall.
The body having a free fall is called a ‘freely
falling body’.
Galileo proved that the acceleration of an object
falling freely towards the earth does not
depend on the mass of the object.

Imagine that vacuum is created by evacuating

the air from the glass jar.
The feather and the coin fall with same
acceleration and reach the ground at the same
time.
 Acceleration due to gravity (g)
Acceleration due to gravity is defined as the uniform acceleration produced
in a freely falling body due to the gravitational force of the earth.
Acceleration due to gravity (g) = 9.8 m/s2 = 980 cm/s2.

Calculation of acceleration due to gravity (g)

Suppose a body of mass ‘m’ is placed on the earth of mass ‘M’ and radius
‘R’.
According to Newton’s universal law of gravitation,
Force exerted by the earth on the body is given by
m
Mxm R
F=G M
R2
This force exerted by the earth produces an acceleration on the body.
Therefore, F = mg (g - acceleration due to gravity)

From the two equations, we have

Mxm GM
mg = G or g=
R2
R2
 Acceleration due to gravity on the earth is calculated as follows:
Mass of the earth = 6 x 1024 kg
Radius of the earth = 6.4 x 106 m
Gravitational constant = 6.67 x 10-11 N m2 kg-2
GM
g=
R2
Substituting the values, we get 9 = 9.8 m/s2
For simplified calculations we can take g as 10 m/s2

h
Variation of acceleration due to gravity (g)
m
1. Acceleration due to gravity decrease with altitude.
R M
GM GM
g= g’ =
R2
(R+h)2
 2. Acceleration due to gravity decrease with depth.
m
h
GM G M’ R M
g= g’ =
R2
(R-h)2
M’
3. Acceleration due to gravity is greater at the poles
and less at the equator.

GM GM
gp = ge m
= R p2 Re2

Earth is slightly flattened at the poles and bulging at the Rp

equator. The radius of the earth at the poles is 21 km m
less than that at the equator. Re
M
i.e. Rp < Re

Therefore, from the above equations, G and M being

same and g is inversely proportional to the square of the
radius,
gp > ge
gp = 9.823 m/s2 , ge = 9.789 m/s2 and average value of g = 9.8 m/s2
 EQUATIONS OF VERTICAL MOTION (Under the influence of g)
Let a body be thrown vertically downward with initial velocity ‘u’. Let the
final velocity of the body after time ‘t’ be ‘v’. Let ‘h’ be the height (vertical
distance) covered by the body and ‘g’ be the acceleration due to gravity.

Then the equations of motion are:

v = u + gt -u, -v -g, -h
h = ut + ½ gt2
= u2 + 2gh
v2
When a body is dropped freely, the equations of motion are:

v = gt
u = 0, -v -g, -h
h = ½ gt 2

= 2gh
v2 vertically upwards, the equations of motion are:
When a body is thrown

v = u - gt
+u, +v -g, +h
h = ut - ½ gt2

2 = u2 - 2gh
 Cartesian Sign Conventions for Vertical Motion
1. The physical quantities having vertically upward motion are assigned
positive values.
2. On the other hand, the physical quantities having vertically downward
motion are assigned negative values.
3. Acceleration due to gravity (g) always acts in the downward direction and
hence taken negative.

TIPS TO SOLVE THE NUMERICAL PROBLEMS

4. g is always taken negative.
5. When a body is dropped freely its initial velocity u = 0.
6. When a body is thrown vertically upwards, its final velocity becomes zero
at the maximum height.
7. The time taken by a body to rise to the highest point is equal to the time it
takes to fall from the same height.
MASS

50 g 10 g

50 g 10 g

Mass of the body = 60 g

The mass of a body is the quantity of matter contained in it.
Mass of a body is a measure of inertia of the body and hence called
inertial mass.
Mass is a scalar quantity.
SI unit of mass is kilogramme or kg.
CGS unit of mass is gramme or g.
Mass of a body is constant and does not change from place to place.
Mass is measured by a beam or common balance.
Mass of a body can not be zero.
WEIGHT

20

40

60

80

100

Weight = 60 gwt
= 60 x 980 = 58800 dynes
= 0.588 N
The weight of a body on the earth is the force with which it is attracted
towards the centre of the earth.
Weight = mass x acceleration due to gravity
W=mxg
SI unit of weight is ‘newton’ or N
Weight of 1 kg mass is 9.8 newton.
Weight is a vector quantity since it has both magnitude and direction.
Weight changes from place to place.
Weight is measured by a spring balance.
Weight of a body can be zero. When a body is taken to the centre
of the earth, acceleration due to gravity at the centre is zero and
hence weight is zero.
On the moon, acceleration due to gravity is nearly 1/6th of that on the
earth and hence the weight of a body on the moon is 1/6th of its weight
on the earth.
 Blaise Pascal

(1623 - 1662)

Archimedes
( 287 BC – 212
THRUST AND PRESSURE

When a blunt pin is applied force it does not go into the wood whereas a
sharp pin goes into the wood with same amount of force.
Thus, the effect of a force depends on the area of the object on which it
acts.
 Weight of a body is also a force and it always acts in the downward direction.
Observe the two different positions of brick on the ground.

REX
REX

Both the bricks exert same amount of force on the ground because they have
same weight but the two bricks exert different pressure due to different area
of contact with the ground.
A lying brick exerts less pressure on the ground whereas the standing brick
exerts more pressure on the ground.
Therefore, pressure depends on (i) Force applied and
(ii) Area over which it acts.

Pressure is the force acting perpendicularly on a unit area of the object.

Force F
Pressure =-------------- or P=
Area
A
Pressure is a scalar quantity.
Pressure is force per unit area. Force is a vector quantity but still pressure is
a scalar quantity because it does not have any particular direction.
Think of a point inside the liquid or gas in a tank. Pressure at that point acts
in all the directions. That is, through 360º. Therefore pressure can not be
assigned a specific direction and hence is a scalar.
At the same time, if pressure is applied on a surface then the resulting force
is a vector quantity since it has direction of effect of pressure on the surface.
The pressure exerts force on the walls of the container of the liquid or gas.
SI unit of pressure is N/m2 or Nm-2 or pascal
(Pa)
Pressure can also be defined in terms of ‘thrust’.
Thrust is the force acting on a body perpendicular to its surface.
Thrust per unit area is called ‘pressure’.
Thrust
Pressure =----------------
Area
 Everyday observations on the basis of pressure
1. School bags have wide straps.
2. Sharp knife cuts better than a blunt knife.
3. Tip of a needle is made sharp.
4. Pressure of the ground is more when a man is walking than when he is
standing.
5. Depression is much more when a man stands on the cushion than when
he lies down or sits on it.
6. The tractors have broad tyres so that there is less pressure on the ground
and the tyres do not sink into comparatively soft ground in the fields.
7. It is easier to walk on soft sand if we have flat shoes rather than shoes
with sharp heels.
8. Foundations of buildings and dams are laid broad at the bottom to
decrease the pressure.
PRESSURE IN FLUIDS
The substances which can flow easily are called fluids.
All the liquids and gases are fluids.
Like solids exert pressure due to their weight liquids also have weight and
they exert pressure.
But a fluid (liquid or gas) exerts pressure in all directions – sideward,
downward and even upwards !

BUOYANCY
When an object is placed in a liquid, the liquid exerts an ‘upward
force’ on it.
It is easy to lift a stone as long as it is inside water but feels heavy if it is
lifted above water.
A mug of water inside the water appears lighter but it feels heavier when
lifted above the water.
Therefore, the objects appear to be less heavy when submerged in liquid
than they are in air. This shows that every liquid exerts an upward force on
the objects immersed (partially of wholly) in it.
The tendency of a liquid to exert an upward force on an object placed in it, is
 Buoyant Force

The upward force acting on an object immersed in a liquid is called buoyant

force.
It is also called ‘upthrust’.

Cause of Buoyant Force

When a mug is inside the water, the pressure
from the sides are equal and no net force is
available.
But pressure at the bottom of the mug is
more due to more depth of water and is less
at the top due to less depth of water.
The difference in pressure exerts net upward
force called upthrust or buoyant force. The
mug usually made of plastic (lighter than Weight Buoyant Force
water) is pushed up due to this upthrust.
 Experiment to study the magnitude of
Buoyant Force
0

20

40

60

80

100

Weight of the body in air is 60 gwt.

 0

20
20

40
40
0
60

6
280

00

10 00
60
48

00
80

10
100

Weight of the body partially

immersed in liquid is 50 gwt.
 0

20
0
0

40
20
20

60
40
40

80
60
60

00
180
80

100

Weight of the body fully immersed in

liquid is 40 gwt.
 Factors affecting Buoyant Force
The magnitude of buoyant force acting on an object immersed in a liquid
depends on:
(i) Volume of object immersed in the liquid and
(ii) Density of the liquid.

(iii) As the volume of solid object immersed inside the liquid increases, the
upthrust or buoyant force also increases. When the solid is fully
immersed, the buoyant force becomes maximum.
The buoyant force depends only on the volume but not the nature of the
solid object. That is, if two balls of equal size but of different metals are
immersed in the liquid, both of them experience same buoyant force.
(ii) Liquids having higher density exert more buoyant force than the liquids
having lower density.
It is easier to swim in sea-water than in lake because density of sea-water
is more when compared to that of lake water.
Even an iron block can float on mercury because of its (mercury) high
density.
ARCHIMEDES’ PRINCIPLE
When an object is wholly or partially immersed in a liquid, it experiences a
buoyant force (or upthrust) which is equal to the weight of the liquid
displaced by the object.

Buoyant force (or upthrust) acting on an object = Weight of liquid displaced by it

Applications of Archimedes’ Principle

1. Archimedes’ principle is used in determining the relative density of a
substance.
2. The hydrometers used for determining the density of liquids are based on
Archimedes’ principle.
3. The lactometers used for determining the purity of milk are based on
Archimedes’ principle.
4. Archimedes’ principle is used in designing ships and submarines.
WHY OBJECTS FLOAT OR SINK IN A LIQUID

Iron nail sinks whereas cork floats in water

When an object is placed in a liquid, two forces act on it:
1. Weight of the object acting downwards (which tends to pull down the
object) and
2. Buoyant force (upthrust) acting upwards (which tends to push up the
object).

Now, whether an object will float or sink in a liquid depend on the relative
magnitude of these two forces acting in opposite directions.

Three cases arise:

• If the buoyant force exerted by the liquid is less than the weight of the
object, then the object will sink in the liquid.
• If the buoyant force exerted by the liquid is equal to the weight of the
object, then the object will float in the liquid where it is suspended.
• If the buoyant force exerted by the liquid is more than the weight of the
object, then the object will rise in the liquid and then float.
 The Principle of Floatation
An object will float in a liquid if the weight of the object is equal to the weight
of liquid displaced by it.

i.e. Weight of the object = Weight of the liquid displaced by it

A floating body may be partially or wholly submerged in the liquid. The

liquid is displaced by that portion of the body which is submerged under
liquid.

The Density of Floating Objects

1. An object will float in a liquid if its density is less than that of the liquid.
2. An object will also float in a liquid if its density is equal to that of the
liquid.
3. An object will sink in a liquid if its density is more than that of the liquid.
 Weight Buoyant Force

Water Mercury

Iron Block sinking Iron Block floating

in water in mercury
 How does a boat float in water?
When a boat is gradually lowered into water, it displaces more and more
water due to which the upward ‘buoyant force’ acting on it increases.
The boat stops sinking further down into water when the buoyant force
acting on it is just enough to support the weight of the boat.
When the boat is floating, the weight of water displaced by the submerged
part of the boat is equal to the weight of the boat.
When more people get into the boat, the boat sinks more. As long as the
weight of the boat and the people together is equal to the weight of the water
displaced by the boat, it floats. When no more water can be displaced by the
Line
boat, it sinks. Plimsoll

Line
Plimsoll

Weight Buoyant Force

DENSITY
The density of a substance is defined as mass of the substance per unit
volume.
Mass of the substance
Density =
Volume of the substance

M
D=

V
Density of a substance is one of its characteristic properties.

SI unit of density is kilogramme per cubic metre or kg/m3 or kg m-3.

CGS unit of density is gramme per cubic centimetre or g/cm3 or g cm-
.
3
RELATIVE DENSITY
The relative density of a substance is the ratio of its density to that of water.

Density of the substance

Relative density =
Density of water

Ds
RD=
Dw

The relative density of a substance is also defined as the ratio of the mass of
any volume of the substance to the mass of an equal volume of water.

Mass of the substance

Relative density =
Mass of an equal volume of water

Relative density of a substance expresses the heaviness of the substance in

comparison to water.
As the relative density is the ratio of two similar quantities, it has no units.
 Densities of some common substances
S.No. Substance Density in Density in Relative
kg/m3 g/cm3
Density
1 Cork 240 0.24 0.24

2 Wood 800 0.8 0.8

3 Ice 920 0.92 0.92
4 Water 1000 1.0 1.0
5 Glycerine 1260 1.26 1.26
6 Glass 2500 2.5 2.5

7 Aluminium 2700 2.7 2.7

8 Iron 7800 7.8 7.8

9 Silver 10500 10.5 10.5

10 Mercury 13600 13.6 13.6
11 Gold 19300 19.3 19.3
12 Platinum 21400 21.4 21.4