Engine Characteristics (DV15T/DV15TIS) - Technical Tips For Maintenance

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 14

Engine(DV15T /DV15TIS)

Contents

Ⅰ. Engine Characteristics (DV15T/DV15TIS)


Ⅱ . Technical Tips for Maintenance

Page 1
DV15T/15TIS Characteristics

Page 2
1. Specification

Model DV15T DV15TIS


4 cycle, V type, 4 cycle, V type,
Type Turbo charged T/C & intercooled
Fuel Injection Direct Injection Type
Cylinder Bore × Stroke Number 128mm × 142mm - 8
Displacement 14,618 cc
Compression Ratio 16.5 : 1 17.4 : 1
370PS/2,300 390/420PS/2,100
Max Power & Torque
145Kg.m/1300 160/170Kg.m/1200
Fuel Consumption(Min.) 155g/ps.h / 1,300 155g/ps.h / 1,200

Page 3
Model DV15T DV15TIS
Fuel Injection Timing BTDC 7˚ ± 0.5˚ BTDC 5.5˚ ± 0.5˚
Injection Order 1-5-7-2-6-3-4-8
Injection Nozzle Type 4 - Φ 0.39 5 - Φ 0.32
Feul Injection Pressure 200kg/ ㎠ 250kg/ ㎠
Injection pump type BOSCH INLINE P-TYPE(RQ or RQV)
Thermostat Wax pallet(79 ~ 94˚)
Lubrication capacity 24 liter
Oil pan capacity High level : 21liter Low level : 19liter
Lub.oil(recommended) Above API CE API CH-4

Page 4
2. Engine performance

Engine Model Performance


Power Torque Fuel C. Low Idle High Idle
Model
(PS/rpm) (kg.m/rpm) (g/ps.h) (rpm) (rpm)
155g/ps.h
DV15T 370/2,300 145/1,300 600~650 2,530
1300rpm
155g/ps.h
390/2,100 160/1,200 600~650 2,370
1200rpm
DV15TIS
155g/ps.h
420/2,100 170/1,200 600~650 2,370
1200rpm

Page 5
3. Performance Curve(420ps)

Page 6
4. Engine sectional view (longitudinal)

5 6 7 8 9

1 oil seal
4
2 Vibration damper 3 Water pump
3
4 Thermostat 5 Piston pin
6 Piston 7 Ex.valve
2
8 Valve cotter 9 Valve Guide
1 10 10 ps pump 11 Air comp
11
12 Pilot brg 13 Oil seal
14 Fly wheel 15 Crank shaft
12 16 Drain plug 17 Oil suction pipe
13
18 Relief valve 19 Cam shaft
20 Fly wheel hsg
14

15 16 17 18 19 20

Page 7
5. Engine sectional view (Cross)

5 6 7 8 9 10
11

12
4
1 Cylinder block 8 Priming pump
13 2 Oil cooler 9 Inj.pump
3
3 Cylinder liner 10 Inj.pipe
4 Cylinder Head 11 Intake manifold
5 Rocker arm 12 Inj.nozzle
14 6 Push rod 13 Combustion chamber
7 Breather 14 Ex.manifold

15 16 17

Page 8
Technical Tips for Maintenance
[DV15TIS]

Page 9
1. Lubrication System

Page 10
2. Oil Filter

● Check for oil pressure and oil leaks,


and repair or replace the oil filter
if necessary. Change the oil filter
cartridge simultaneously at every
replacement of engine oil.
Oil filter
Oil filter element

Page 11
3. Cooling System

Page 12
4. Cooling Water

● Regarding the cooling water that is to be used for engine, the soft water not
the hard water must be used.
● The engine cooling water can be used diluting it with antifreezing solution 40%
and the additive for rust prevention (DCA4) 3 ∼ 5 %.
● The density of above solution and additive must be inspected every 500 hours
to maintain it properly.
● Since DV15, DV15T, DV15TI, DV15TIS (Engine of D28 base engine) cylinder
liner is wet type, particularly the cooling water control should be applied
thoroughly.

Page 13
5. FUEL SYSTEM

6 7 8

10 “X”

5 4 3 2
1

FUEL FUEL
RETURN RETURN

VIEW “X”

Page 14

You might also like