OWG001209 MSOFTX3000 BICC Data Configuration-20090227-B-1.0

Security Level: Public
OWG001209 MSOFTX3000 BICC data configuration

ISSUE1.0
www.huawei.com
HUAWEI TECHNOLOGIES CO., LTD.
HUAWEI Confidential
References
MSOFTX3000 Package of Document-
MSOFTX3000 Configuration Guide

UMG8900 Package of Document-
Configuration Guide
HUAWEI Confidential
Page 2
Upon completion this course, you will be able to:

> Master BICC data configuration based on SCTP. > Master BICC data configuration based on M3UA. > Master Nb interface data configuration.
HUAWEI Confidential
Page 3
Network structure
Nc
BICC SCTP IP LL BICC M3UA SCTP IP LL
MAP/CAP Nc MSC Server Mc A A BTS BSC MGW Nb
MAP/CAP
MSC Server Mc MGW Iu-cs Iu-cs RNC Node B
IP back bone
If Nb interface adopts IP beare, BICC should be used for the MSC Server,
which controls the MGW.

BICC can bases on SCTP or M3UA.
HUAWEI Confidential
Page 4
Chapter 1 BICC data configuration based on SCTP Chapter 2 BICC data configuration based on M3UA Chapter 3 UMG8900 Nb data configuration
HUAWEI Confidential
Page 5
Chapter 1 BICC data configuration based on SCTP 1.1 Basic principle 1.2 Data configuration 1.3 Debug commands
HUAWEI Confidential
Page 6
BICC protocol stacks based on SCTP

BICC SCTP IP MAC PHY
SG
MAP/CAP Nc MSC Server Mc A MGW A BTS BSC Nb IP back bone
MAP/CAP
MSC Server Mc MGW Iu-cs Iu-cs RNC Node B
HUAWEI Confidential
Page 7
Ralationship between boards and protocols
HUAWEI Confidential
Page 8
HUAWEI Confidential
Page 9
Ralationship between commands and protocols

HUAWEI TECHNOLOGIES CO., LTD. HUAWEI Confidential
Page 10
Parameter relationship of commands
HUAWEI Confidential
Page 11
ADD OFC
If BICC over SCTP If BICC over M3UA
HUAWEI Confidential
Page 12
ADD BICCTG
FORWARD is suggested
Delay is suggested
HUAWEI Confidential
Page 13
ADD BICCCICMDU
BICCs CIC is different from ISUPs CIC, it is Call Instance Code (CIC),
which is a logic number associated with the inter-office calling relation
HUAWEI Confidential
Page 14
MSRN allocation and analysis

HLR
Nc
Allocate MSRN
MSC Server A Mc A A BTS BSC MGW Nb MSC Server B Mc MGW Iu-cs
Analyze MSRN
Iu-cs RNC Node B
IP back bone
The called MSC allocates the MSRN, the calling MSC analyzes the MSRN
allocated by the called MSC.
HUAWEI Confidential
Page 15
HUAWEI Confidential
Page 16
Debug commands
BICC
SCTP IP MAC PHY
HUAWEI Confidential
Page 17
Status of trunk circuit

Not blocked, Idle : The circuit is in Idle state and is available for a call. Transient : The circuit is in Transient state and is unavailable for a call. Locally blocked, Idle : The Locally blocked state indicates that the circuit is blocked at the local side. The system cannot select a trunk circuit in this state to route an outgoing call. You can run UBL BICCCIC to unblock a circuit in this state. The Idle state indicates that the circuit can be used to receive an incoming call. Remotely blocked, Idle : The Remotely blocked state indicates that the BICC CIC circuit is blocked at the peer side. The system cannot select a circuit in this state to receive an incoming call originated by the peer office. The Idle state indicates that the trunk circuit can be used to route an outgoing call. Locally and remotely blocked, Idle : The circuit is blocked at the local side and the peer side and is unavailable for a call. Unequipped : The circuit is not configured, or it is not configured with the online setting. It is unavailable for a call.

HUAWEI Confidential
Page 18
Questions
Please describe the BICC protocol stacks based on SCTP? Whats the data configuration difference between BICC CIC and ISUP
CIC ?
In the BICCTG command how to configure the parameters of bearer
establish direction and Tunnel mode?
HUAWEI Confidential
Page 19
HUAWEI Confidential
Page 20
Chapter 2 BICC data configuration based on M3UA 2.1 Basic principle 2.2 Data configuration 2.3 Debug commands
HUAWEI Confidential
Page 21
BICC protocol stacks based on SCTP

BICC M3UA SCTP IP MAC PHY
Iu-cs Iu-cs RNC IP back bone Node B
MAP/CAP Nc MSC Server Mc A MGW A BTS BSC Nb
MAP/CAP
MSC Server Mc MGW
HUAWEI Confidential
Page 22
Ralationship between boards and protocols

Page 23
HUAWEI Confidential
Page 24
Ralationship between commands and protocols

Page 25
Parameter relationship of BICC layer commands
HUAWEI Confidential
Page 26
Parameter relationship of M3UA and low layer commands
HUAWEI Confidential
Page 27
ADD OFC
If BICC over SCTP If BICC over M3UA
HUAWEI Confidential
Page 28
ADD BICCTG
FORWARD is suggested
Delay is suggested
HUAWEI Confidential
Page 29
HUAWEI Confidential
Page 30
Debug commands
BICC
M3UA SCTP IP MAC PHY
HUAWEI Confidential
Page 31
Status of trunk circuit

Not blocked, Idle : The circuit is in Idle state and is available for a call. Transient : The circuit is in Transient state and is unavailable for a call. Locally blocked, Idle : The Locally blocked state indicates that the circuit is blocked at the local side. The system cannot select a trunk circuit in this state to route an outgoing call. You can run UBL BICCCIC to unblock a circuit in this state. The Idle state indicates that the circuit can be used to receive an incoming call. Remotely blocked, Idle : The Remotely blocked state indicates that the BICC CIC circuit is blocked at the peer side. The system cannot select a circuit in this state to receive an incoming call originated by the peer office. The Idle state indicates that the trunk circuit can be used to route an outgoing call. Locally and remotely blocked, Idle : The circuit is blocked at the local side and the peer side and is unavailable for a call. Unequipped : The circuit is not configured, or it is not configured with the online setting. It is unavailable for a call.

HUAWEI Confidential
Page 32
Questions

Please describe the BICC protocol stacks based on SCTP? Whats the data configuration difference between BICC CIC and ISUP CIC ? In the BICCTG command how to configure the parameters of bearer establish direction and Tunnel mode? Whats data configuration difference between BICC over SCTP and BICC over M3UA
HUAWEI Confidential
Page 33
HUAWEI Confidential
Page 34
Chapter 1 UMG8900 Nb data configuration 1.1 Basic principle 1.2 Data configuration 1.3 Debug commands
HUAWEI Confidential
Page 35
Nb interface protocol stacks

MAP/CAP Nc MSC Server Mc A MGW A BTS BSC Nb RNC IP back bone Node B MSC Server Mc MGW Iu-cs Iu-cs MAP/CAP
NbUP RTP UDP IP MAC PHY
RTCP UDP IP MAC PHY
IPBCP
HUAWEI Confidential
Page 36
HUAWEI Confidential
Page 37
Relationship between tables

UMG8900
MOD IPIF IFT BT BN IFN SPEED DUPLEX AUTONEGO DOMAIN BEARBW ADD IFVLAN(optional) BT BN IFT IFN VID VDOMAIN VBEARBW ADD IPADDR BT BN IFT IFN IPADDR MASK FLAG INVLAN VID ADD GWADDR BT BN DOMAIN IPADDR GWIP
Others
SET DOMAIN(optional) DOMAIN DESC ISSAFE ASTART AEND ADD RTBAK(optional) BT BN IFT IFN DOMAIN IPADDR IPADDRBAK ADD RSVPORT(optional) BT BN DOMAIN IPADDR SPORT EPORT ADD BFD(optional) BT BN IFT SRCIP
SPEED DUPLEX AUTONEGO
LAN Switch/Router
VLAN
HUAWEI Confidential
Page 38
Set domain
MSC SERVER
rk
10.251.0.1/24 10.251.0.2/24 10.251.0.3/24 10.251.0.4/24 ...
Company MGW
Company
10.251.0.1/24 10.251.0.2/24 10.251.0.3/24 10.251.0.4/24 ...
When the networks which connected to one MGW have same IP addresses, different
domain should be set for different network.
HUAWEI Confidential
Page 39
MOD IPIF
This command is used for the bandwidth control Suppose the there is a HRB board, the module number is 0, the bandwidth of port 0 should
be set 500M, the following command can be used

>MOD IPIF: IFT=GE, BT=HRB, BN=0, IFN=0, BEARBW=512000;
HUAWEI Confidential
Page 40
ADD IFVLAN
MGW
VLAN 10 20 30
MSC Server
VLAN 20
LANSWITCH
VLAN 10 VLAN 30
OMC
IP backbone
The VLAN ID can be configured for different IP address. The LANSWITCH can distinguish the signaling flow, media flow, O&M flow by VLAN
ID, in order to grantee the reliable delivery
HUAWEI Confidential
Page 41
ADD RTBAK
0 IP0 500M IP2
HRB
1 IP1 500M IP3
GW0 GW1
HRB
IP0 0M
IP2
GW0
1 IP1 1000M
IP3
GW1
By this data configuration, the media flow can be sent through two plane, and these two
plane are load sharing If one plane breaks down, other plane will carry all the media flow.
HUAWEI Confidential
Page 42
ADD RSVPORT
This command is used to define which ports are not used for bearer
HUAWEI Confidential
Page 43
ADD BFD
BFD
Bidirectional Forwarding Detection
>BFD is used to check the channel state between two devices. If the active channel is found faulty, the standby channel can be used rapidly to transmit the service. In this case, the service and inband maintenance channel are more reliable.
The BFD association will occupy the UDP port 3784 and 3785, these two ports can not be
used for signaling and bearer flow.
HUAWEI Confidential
Page 44
ADD GWADDR
Just when FE or GE interface is adopted, this table should be configured, if POS
interface is adopted, this table neednt configure.

The address of the IP interface on the HRB must be in the same network segment with
the gateway IP address
HUAWEI Confidential
Page 45
Questions
When the set domain command must be configured? By which command the bandwidth can be configured for the IP port? By which command, we can define the IP ports are not used for bearer
services?
HUAWEI Confidential
Page 46
HUAWEI Confidential
Page 47
DSP IPIF
Check if the physical and link layers are UP or not.
P P
HUAWEI Confidential
Page 48
DSP BFD
DSP BFD is used to display BFD measurement information
DSP BFD
HUAWEI Confidential
Page 49
DSP GWADDR
Check if the MAC address of Gateway is resolved or not.
%%DSP GWADDR: BT=HRB, BN=0;%% RETCODE = 0 accomplished
Gateway Running Information -----------BT HRB BN IP address 0 10.1.1.3 mask 255.255.255.0 MAC address 00e0.fc39.ef9f valid or not yes
HUAWEI Confidential
Page 50
Questions
How many commands can be used to check if the data configuration for
IP bearer services is correct or not?
HUAWEI Confidential
Page 51
Thank You
www.huawei.com

OWG001209 MSOFTX3000 BICC Data Configuration-20090227-B-1.0

Uploaded by

Copyright:

Available Formats

OWG001209 MSOFTX3000 BICC Data Configuration-20090227-B-1.0

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

OWG001209 MSOFTX3000 BICC Data Configuration-20090227-B-1.0

Uploaded by

Copyright:

Available Formats

Security Level: Public

OWG001209 MSOFTX3000 BICC data configuration

HUAWEI TECHNOLOGIES CO., LTD.

MSOFTX3000 Configuration Guide

HUAWEI TECHNOLOGIES CO., LTD.

Upon completion this course, you will be able to:

HUAWEI TECHNOLOGIES CO., LTD.

MAP/CAP Nc MSC Server Mc A A BTS BSC MGW Nb

MSC Server Mc MGW Iu-cs Iu-cs RNC Node B

which controls the MGW.

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

BICC protocol stacks based on SCTP

MAP/CAP Nc MSC Server Mc A MGW A BTS BSC Nb IP back bone

MSC Server Mc MGW Iu-cs Iu-cs RNC Node B

HUAWEI TECHNOLOGIES CO., LTD.

Ralationship between boards and protocols

BICC SCTP IP MAC PHY

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

Ralationship between commands and protocols

BICC SCTP IP MAC PHY

Parameter relationship of commands

HUAWEI TECHNOLOGIES CO., LTD.

 If BICC over SCTP  If BICC over M3UA

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

which is a logic number associated with the inter-office calling relation

HUAWEI TECHNOLOGIES CO., LTD.

MSRN allocation and analysis

Iu-cs RNC Node B

allocated by the called MSC.

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

SCTP IP MAC PHY

HUAWEI TECHNOLOGIES CO., LTD.

Status of trunk circuit

HUAWEI TECHNOLOGIES CO., LTD.

establish direction and Tunnel mode?

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

BICC protocol stacks based on SCTP

MAP/CAP Nc MSC Server Mc A MGW A BTS BSC Nb

MSC Server Mc MGW

HUAWEI TECHNOLOGIES CO., LTD.

Ralationship between boards and protocols

BICC M3UA SCTP IP MAC PHY

HUAWEI TECHNOLOGIES CO., LTD.

Ralationship between commands and protocols

BICC M3UA SCTP IP MAC PHY

Parameter relationship of BICC layer commands

HUAWEI TECHNOLOGIES CO., LTD.

Parameter relationship of M3UA and low layer commands

HUAWEI TECHNOLOGIES CO., LTD.

 If BICC over SCTP  If BICC over M3UA

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

HUAWEI TECHNOLOGIES CO., LTD.

If BICC over SCTP If BICC over M3UA

If BICC over SCTP If BICC over M3UA