0% found this document useful (0 votes)
261 views27 pages

Fixed Length Subnetting - Withoutnote

The document discusses subnetting and provides examples of fixed length subnet masking (FLSM). It begins by explaining that subnetting divides a single network into smaller subnetworks or subnets to minimize wasted IP addresses. It then provides steps to perform FLSM including calculating the subnet mask, determining the subnet range, and dividing the network. Examples are given to subnet the networks 198.168.10.0/24 and 192.168.10.0/255.255.255.192. The document concludes with exercises for readers to practice subnetting class A, B, and C networks using FLSM.

Uploaded by

Sadik Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
261 views27 pages

Fixed Length Subnetting - Withoutnote

The document discusses subnetting and provides examples of fixed length subnet masking (FLSM). It begins by explaining that subnetting divides a single network into smaller subnetworks or subnets to minimize wasted IP addresses. It then provides steps to perform FLSM including calculating the subnet mask, determining the subnet range, and dividing the network. Examples are given to subnet the networks 198.168.10.0/24 and 192.168.10.0/255.255.255.192. The document concludes with exercises for readers to practice subnetting class A, B, and C networks using FLSM.

Uploaded by

Sadik Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 27

Subnetting (Classless

Addressing)
M D . FA H A D H O S S A I N
L E C T U R E R , D E PA RT M E N T O F C S E
D A F F O D I L I N T E R N AT I O N A L U N I V E R S I T Y

1
In classful addressing, a large part of the
available addresses were wasted.

Classful addressing, which is almost obsolete, is


replaced with classless addressing.

2
Subnetting
Subnetting is the process of Dividing a Single
Network into smaller sub-networks called subnets.
It helps in minimizing the wastage of IP address.

3
Types of Subnetting
Two Types of Subnetting
 Fixed Length Subnetting (FLSM)
 Variable Length Subnetting (VLSM)

* FLSM = Fixed Length Subnet Mask


* VLSM = Variable Length Subnet Mask

4
How subnetting can be done?
Subnetting can be done based on requirements.
 Requirement of Host? -2 >= requirement
 Requirement of Network? >= requirement
Here, h= host bits , n= network bits
 What we do in subnetting?
Converting Host Bits into Network Bits. (Reducing number of host bits)
i.e. Converting 0’s into 1’s

5
Fixed Length Subnetting
In Fixed Length Subnetting the length of subnet is fixed and all the
subnets are in equal size.

1st Subnet 2nd Subnet


3rd Subnet 4th Subnet

6
Fixed Length Subnetting
Let’s, consider an IP address 198.168.10.0

Now we have to divide this IP address into 4 subnetwork parts. After


dividing we have to find out the range of IP addresses blocks.

7
Step 1: Calculate the required subnet bit. In this
subnetting process, we will borrow the bit from the
host side.
Now here is the question arise, which bits belong to the host side and network side?
We will find it with the help of subnet masks. We are given a Class C IP address and default subnet mask for
Class C is 255.255.255.0
Every octet consists of 8-bit in this case we are having 24 1’s in network bit.

As we know that every binary value having two possible values either 0 or 1. And with one binary we can
make two value and with two binary values, we can make four values. And with three binary value, we can
make 8 values and so on. Which is actually follow the 2 Power Table.

8
Step 1
Here, we need to configure 4 subnets for this we need to borrow 2
bits from the host bits and making the MSB of host bit of subnet
mask to 1 as now it will be considered to be Network Bits and the
value we will get,
11111111.11111111.11111111.11000000
From this we can now calculate the subnet mask.

9
Step 2: Calculating updated subnet
mask.
In this step we will be calculating the updated subnet mask.
11111111.11111111.11111111.11000000
255 . 255 . 255 . 192

10
Step 3: Finding the range
We will find the range in this step.
Formula,
Range: (Maximum Subnet Mask – Updated Subnet Mask)
Maximum Subnet Mask is always 255.255.255.255 for every case
Maximum Subnet Mask: 255.255.255.255
Updated Subnet Mask: - 255.255.255.192
0. 0. 0. 63
Here is the range for network we have got is 0.0.0.63
11
Step 4:Divide the whole network with
the help of the range.
Now we will divide the whole network with the help of the range.
First Network Block:
198.168.10. 0
+ 0. 0. 0.63
198.168.10.63
So for this block, Network address will be: 198.168.10.0
Broadcast address will be: 198.168.10.63
First host address will be: 198.168.10.1 (NA+1)
Last host address will be: 198.168.10.62 (BA-1)

12
Step 4
Second Network Block:
198.168.10.64
+ 0. 0. 0.63
198.168.10.127
So for this block, Network address will be: 198.168.10.64
Broadcast address will be: 198.168.10.127
First host address will be: 198.168.10.65
Last host address will be: 198.168.10.126

13
Step 4
Third Network Block:
198.168.10.128
+ 0. 0. 0. 63
198. 168. 10.191
So for this block, Network address will be: 198.168.10.128
Broadcast address will be: 198.168.10.191
First host address will be: 198.168.10.129
Last host address will be: 198.168.10.190

14
Step 4
Forth Network Block:
198.168.10.192
+ 0. 0. 0. 63
198. 168.10.255
So for this block, Network address will be: 198.168.10.192
Broadcast address will be: 198.168.10.255
First host address will be: 198.168.10.193
Last host address will be: 198.168.10.254

Subnet masks will remain same for every network block i.e. 255.255.255.192

15
FLSM Exercises
1. Using FLSM, subnet the class A IP 20.0.0.0/8 as 8 subnets.
2. Using FLSM, subnet the class B IP 172.3.0.0/16 as 4 subnets.
3. Using FLSM, subnet the class C IP 192.168.2.0/24 as 6 subnets.

16
More with Subnetting
When you’ve chosen a possible subnet mask for your network and need to
determine he numbers of subnets, valid hosts, and broadcast addresses of a
subnet that the mask provides, all you need to do is answer five simple
questions:
How many subnets does the chosen subnet mask produce?
How many valid hosts per subnet are available?
What are the valid subnets?
What’s the broadcast address of each subnet?
What are the valid hosts in each subnet?
17
Examples
Given, Network Address = 192.168.2.0
Subnet mask = 255.255.255.128
Now let’s answer the five questions:
How many subnets? =>
Here, 128 = 10000000, the number of 1’s gives subnets. Which means 2 subnets
How many hosts per subnet?
=>
Here, 128 = 10000000, the number of 0’s gives hosts. Which means 126 hosts per subnet.
We need to subtract 2 for the subnet address and the broadcast address. Which are not valid hosts.

18
Examples (Cont.)
What are the valid subnets? => 256 – subnet mask = block size, or increment number.
Here, 256 – 128 = 128. Remember we will start at zero and counting our block size, So the
subnets are 0, 128.
What are the broadcast address of each subnet?
The broadcast address is always the number right before the next subnet.
For 1st subnets the Broadcast address is 127 and for 2nd subnet it is 255
What are the valid hosts? => These are the numbers between subnet and broadcast address
Subnet 0 128
First Host 1 129
Last Host 126 254
Broadcast 127 255

19
Exercise
Given, Network Address = 192.168.10.0
Subnet mask = 255.255.255.192
Now Answer the following questions:
How many subnets does the chosen subnet mask produce?
How many valid hosts per subnet are available?
What are the valid subnets?
What’s the broadcast address of each subnet?
What are the valid hosts in each subnet?

20
Exercise
Given, Network Address = 192.168.10.0
Subnet mask = 255.255.255.224
Now Answer the following questions:
How many subnets does the chosen subnet mask produce?
How many valid hosts per subnet are available?
What are the valid subnets?
What’s the broadcast address of each subnet?
What are the valid hosts in each subnet?

21
More Exercises
For more exercises see page no. 118 to page
no. 136 of
CCNA, Study Guide, 6th Edition, TodLammle.

22
Playing with FLSM
Suppose you have a network address of class A and you want to
create 1000 subnets. Which subnet mask will you choose?

Try to answer first then see the next slide.

23
Answer
We know,
Here number of subnets = 1000
So, 1000 , the value of x must be equal to 10. Because And we need to create 1000 subnets. Where So
we will take x = 10. That means we need to convert 10 Host bits into Network bits.
By default the subnet mask of class A network is 255.0.0.0 (11111111.00000000.00000000.00000000)
Now adding 10 bits into network, the subnet mask will become,
11111111.11111111.11000000.00000000
255 . 255 . 192 . 0

So the answer is 255.255.192.0

24
Given, Network Address = 10.0.0.0/8
00= 0 1st subnet
01= 1 2nd subnet
10= 2 3rd subnet
11= 3 4th subnet
900=901th subnet
10.11100001.00000000.00000000/18

N.A = 10.225.0.0
10.11100001.00111111.11111111/18
B.A = 10. 225. 63. 255
F.H = 10.225.0.1
B.A = 10.225.63.254

25
Given, Network Address = 10.0.0.0/8
2y – 2 = 500
2y = 502
2y = 29
y=9
32bit- 8-9 = 15 bit

10.11100001.00000000.00000000/23

26
Thank You

27

You might also like