Scribd
Upload
100 views24 pages

DTSI Engine

Professor Dept. of Mechanical Engg. Jalpaiguri Govt. Engg. College

Uploaded by

Ajay C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
100 views24 pages

DTSI Engine

Professor Dept. of Mechanical Engg. Jalpaiguri Govt. Engg. College

Uploaded by

Ajay C
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 24

Seminar on :-

Digital Twin Spark


Ignition(DTSI)
Presented
MUHAMMED SANJID
19021817
MECHANICAL ENGG
AWH PTC
Introduction
• A conventional 4 Stroke engine has
a Single Spark Plug and leads to
inefficient combustion.
• Required Basic design for :
i)Uniform power delivery in all
operating conditions.
ii)A high degree of drivability.
iii)Long service life.
So , What is DTSI ??
• Two spark plugs at
opposite ends of
combustion chamber.
• Hemispherical chambers,
piston heads.
• Helps in better fuel
efficiency and lower
emissions.
• Fast and efficient
combustion is obtained.
Main Characteristics
• Digital electronic ignition with two plugs per
cylinder and two ignition distributors.
• Twin overhead cams with camshaft timing
variation.
• Injection fuel feed with integrated electronic
twin spark ignition.
• A high specific power.
• Compact design with superior balance.
Engine comprises of…….???
• Four-in-line cylinder
• Light weight due to all Aluminum -
alloy engine block
• Eight counterweights ensure optimal
balancing of the high strength nitride
steel crankshaft
• The pressed-in cast iron cylinder
liners for more effective heat
dissipation
Valve Drive
• Valves directly acts in V-
configuration (46o).
• Valve timing Actuator operates
exhaust and intake valves.
• At high and medium-high engine
speeds, cylinder filling is optimal.
• At low and medium-low engine
speeds, fluctuation-free operation
is ensured with reduction in
specific fuel consumption.
Fuel Injection
• Fuel injection is used to
ensure excellent fuel
efficiency as well as
environmental friendliness.
• The fuel supply component
consists of fuel pump,
modularized regulator and
filter& a small injector.
• The injector injects finely
atomized spray of fuel
through 6 hole type injectors.
Ignition
• It is controlled by integrated digital
electronic control box called
Capacitor Distributed Ignition(CDI).
• DTSI yields:
1. More effective combustion at low
load and at idling speed.
2. A sizeable reduction in specific fuel
consumption.
3. Less chance of ignition system
failure.
Maiden DTSI
• First 4-wheeler to use DTS-i.
• It is a Superior model of Nano.
• The model is Bajaj RE6O.
• Engine Displacement -Four-
valve DTSi .
• Engine Model - DTSi.
• Engine Type - Petrol.
Bajaj Pulsar 220 DTSI review :
Bajaj Pulsar 220 DTSI review:
The Pulsar 220 DTS-I bike have a India’s largest
carburettor, temperature based ignition mapping and 
Auto choke. To give high end speed and mileage with
air-mixed fuel to prove her power and Good start
ability & better torque.
Bajaj Pulsar 220 DTSI review:
 Spark Plug used in Pulsar 220
DTS-i.

 Comparison of Spark Plug


temperature with the vehicle
velocity.
Bajaj Pulsar 220 DTSI review:

Fig: Starting of Pulsar DTS-i Bike.


Mathematical Model
Mathematical Model
Advantages
• Better starting of engine even in
cold climatic conditions.
• Efficiently balances the
temperature of chambers and
other parts.
• Increase the Thermal Efficiency of
the Engine.
• Diameter of the flame increases
rapidly.
• Twin Spark plugs reduces the
soiling of plugs.
Disadvantages
• The engine tends to overheat and loose
power at higher speeds.
• Requires more investment for replacing
the plugs.
• The engine wear and tear is somehow
increased and hence these engines need
frequent checkup.
Statistics
The following are the various statistics showing the
advantages of application of DTSi & its derived technologies
i.e. the comparison of various aspects of 150 cc category and
125 cc category bikes.
So, finally I conclude…..
• Perfect Combustion in Internal
Combustion engine is not possible.
• DTSI system helps for instantaneous
burning of fuels.
• To overcome the requirements, new
patent DTS-i is introduced.
References
– www.google.com
– www.bajajauto.com
– www.wikipedia.com
– Internal Combustion Engines
by V Ganeshan
Presented by :

Soumen Das
3rd yr. Mechanical Engineering
Roll No. 09101007038
Sec : B1
Jalpaiguri Govt. Engg. College
Guided by :

Dr. N. Mukhopadhyay
[B.E , Ph.D., M.B.A.]

You might also like