Scribd
Upload
39 views16 pages

Windows 7 Ultimate Installation Process

The document provides steps for installing Windows 7. It begins with pressing DEL at startup to access the BIOS and configure boot options to detect the hard disk and CD/DVD drive. Next, the installation media is inserted and the computer rebooted to start the Windows installer. The installer guides the user to create partitions on the hard disk for the Windows installation and data files. The computer then restarts several times to complete the installation process. Upon completion, Windows 7 is launched.

Uploaded by

Ricky Rom Monte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
39 views16 pages

Windows 7 Ultimate Installation Process

The document provides steps for installing Windows 7. It begins with pressing DEL at startup to access the BIOS and configure boot options to detect the hard disk and CD/DVD drive. Next, the installation media is inserted and the computer rebooted to start the Windows installer. The installer guides the user to create partitions on the hard disk for the Windows installation and data files. The computer then restarts several times to complete the installation process. Upon completion, Windows 7 is launched.

Uploaded by

Ricky Rom Monte
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 16

STEPS FOR THE INSTALLATION

PROCESS OF WINDOWS 7
Prepared by:
1 RICKY R. MONTE
ICT Teacher
STEP 1
2
Press ‘DEL’ repeatedly until the CMOS
SETUP UTILITY will display.
STEP 2
Select the Advance ‘CMOS’ features to assure that the Hard Disk And CD Rom are detected.
Now,3 you can see that Hard Disk and Cd Rom has been detected, it is important to have both
of them because one of them will lost you cannot continue installing your operating system.
STEP 3
Advance ‘BIOS’ features
4 Note: Make sure that these following boot are been followed:
1st boot ‘Select one of this options either ‘ATAPI CD ROM’ or ‘Removable Device’. It depends on your
installer if it is stored on the cd so you can use ‘ATAPI CD ROM’ and if you’re installer was stored on the flash
drive so you can use ‘Removable Device'.
2nd boot ‘Hard Drive’
3rd boot ‘Disabled ‘
STEP 4
Press ‘ESC’ to go back to the previous options, insert a CD or DVD first before you click the
5 save and exit setup
6 Press F1 to continue
STEP 5
Note; You need to press any key but ‘once only’ if this message will display on your screen(PRESS ANY
KEY TO BOOT FROM CD OR DVD) because you cannot continue installing when you cannot press any
7
key and after pressing any key it will display like this.
STEP 6
After finishing windows loading files, there have an options has been followed all you have to do is to click ‘Next’,
click ‘Install’ then choose ‘Costume Advance’ you can now ‘Create Partition’.
8
Option a; When partitioning your hard disk drive and if you will format the entire space. Follow these steps; Delete
all the partition then click ‘advanced’’(ALT A)’, the amount of your hard disk will be occurred and you need to
divide it by 2 then Click ‘apply’(ALT P),click Ok. Select ‘Disk Unallocated Space’ then click ‘New’(Alt E),then
click apply (ALT P)click OK.
Option b; If you will have recent files saving to your Data D and prevent it from format while you are installing an
Operating System. Follow these steps. Click Partition 2 then Click ‘Advanced’(ALT A), Click Format then Click
Ok. Click next.
NOTE; Partition 1 for your CDROM
Partition 2 for your Local Disk C;
Partition 3 for your Local Disk D;
STEP 7
9 Installing Windows
10 PRESS F1 TO CONTINUE
11 Your computer will restart several times
during the installation
12 PRESS F1 TO CONTINUE
13 INSTALLATION PROGRESS
14
15 PRES F1 TO CONTINUE
WELCOME TO WINDOWS 7 KHAN ULTIMATE
16

You might also like