BSC integration in Release 4

For public use – IPR applies

1 © Nokia Siemens Networks Presentation / Author / Date / Document Number
Objectives

By the end of this module the trainee should be able to integrate a BSC in
the network (Rel.04), performing the following actions:

• Create signalling definitions between BSC and MGW

• Create routing definitions between BSC and MGW

• Create BSC related signalling definitions in the MSS

• Create BSC related routing and cellular definitions in the MSS

For public use – IPR applies

2 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration to Rel. 4 network

For public use – IPR applies

3 © Nokia Siemens Networks Presentation / Author / Date / Document Number
A interface configuration in the MGW

CCS7 definitions

Create TDM based signalling link

Create Signalling Link Set towards the BSC

Create Signalling Route Set towards the BSC

Allow activation and activate the signalling link

Allow activation and activate the signalling route

For public use – IPR applies

4 © Nokia Siemens Networks Presentation / Author / Date / Document Number
A interface configuration in the MGW

Creation of Routing objects

Create the CGR (Type is SPE and USE by VMGW)

Add circuits to the CGR

Activate the CGR

Attach MGW-BSC resources to the VMGW

Activate circuits

For public use – IPR applies

5 © Nokia Siemens Networks Presentation / Author / Date / Document Number
A interface configuration in the MSS

BSC signalling definitions for MSS-BSC

Create signalling route (Use MGW at STP)

Allow activation and activate signalling route

Create SCCP and its subsystems BSSAP for BSC

Activate SCCP

Activate BSSAP

For public use – IPR applies

6 © Nokia Siemens Networks Presentation / Author / Date / Document Number
A interface configuration in the MSS

BSC routing definitions for MSS-BSC

• Create the location area

• Create BSC
• Modify the BSC (Define signalling system information)
• Create CGR (Type is ECCS)
• Attach termination identifiers to the CGR
• Create route
• Modify CGR state
• Set termination id to WO state
• Define route of circuit pool towards the BSC
• Create BTS
• Define BTS – BSC – LAC relationship
• Unlock BSC and BTS

For public use – IPR applies

7 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Signalling)

MSS MGW
• Create signalling route. Use MGW as STP. • Create TDM based signalling link
• Allow activation of signalling route • Create signalling link set
• Activate signalling route • Create signalling route set
• Create remote SCCP and subsystem • Allow link activation
(BSSAP) • Activate link
• Activate remote SCCP • Allow signalling route activation
• Activate remote SCCP subsystem • Activate signalling route

For public use – IPR applies

8 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Signalling) in MSS

NRI:NA0,320:;

MSCi DX220-LAB 2004-06-14 10:56:43

INTERROGATING SIGNALLING POINT DATA

NET SP CODE H/D NAME RS STATE PAR SET

--- ------------------ ----- -------- -------
NA0 0320/00800 BSC02 AV 1
LOAD SHARING BETWEEN SIGNALLING ROUTES DENIED

ROUTES: SP CODE H/D NAME STATE PRIO

------------------ ----- ------ ----
2810/10256 MGW01 AV-EX 7

NFJ:NA0,320:;

MSCi DX220-LAB 2004-06-14 10:58:33

SUBSYSTEM STATES

NETWORK: NA0 SP CODE H/D: 0320/00800 SP NAME: BSC02

============ =============================== ==============
DESTINATION: ROUTING: SP PAR
NO H/D SS NAME STATE RM NET SP CODE H/D NAME STATE SET SST
------ ------- ----- -- --- ------------------ ----- ------- --- ---
01/001 SCMG AV - NA0 0320/00800 BSC02 AV-EX N*

FE/254 BSSAP AV - NA0 0320/00800 BSC02 AV-EX 1 N*

* FIELD CONTENT IS INSIGNIFICANT BECAUSE WHITE BOOK MANAGEMENT IS NOT USED

For public use – IPR applies

9 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Signalling) in MGW

NRI:NA0,320:;

ATM mod. IPA2800 2004-06-14 11:03:05

INTERROGATING SIGNALLING POINT DATA

NET SP CODE H/D NAME RS STATE PAR SET

--- ------------------ ----- -------- -------
NA0 0320/00800 BSC02 AV 0
LOAD SHARING BETWEEN SIGNALLING ROUTES DENIED

ROUTES: SP CODE H/D NAME STATE PRIO

------------------ ----- ------ ----
0320/00800 BSC02 AV-EX 7

NFJ:

/* IDENTIFY SIGNALLING NETWORK:

NO SIGNALLING NETWORKS DEFINED */

For public use – IPR applies

10 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Routing)

MSS MGW
• Create location area • Create circuit group. Type is SPE
• Create BSC (special) and use by VMGW.
• Modify BSC. Define signalling system • Add circuits to circuit group. PCM in
information. CRCT must match with TERMID in
corresponding circuit group in MSS.
• Create circuit group. Type is ECCS and • Change state of circuits
user part is BSSAP.
• Attach termination identifiers to the circuit • Change state of circuit group
group. TERMID must match with CRCT • Attach MGW- BSC TDM to virtual MGW.
definitions of corresponding circuit group • Add existing and new circuit group
in MGW. otherwise existing replaced by the new.
• Create route VMGW status should be registration not
• Change circuit group state available and registration not allowed
before this command.
• Change termination id state
• Define route of circuit pool in BSC.
• Create BTS.
• Define BSC - BTS – LAC relationship.
• Unlock BSC
• Unlock BTS
For public use – IPR applies
11 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Routing) in MSS
CGR data
RCI:SEA=3:CGR=320:PRINT=5:;

CIRCUIT GROUP(S)

CGR : 320 NCGR : BSC02

TYPE : ECCS STATE : WO-EX HUNTED : YES

FORMAT : TERMID HM1 : LF HM2 : LF
NBCRCT : 15 TREE : - DIR : OUT
LSI : AIF01 INR : - NCCP : -
METHOD : - NET : NA0 SPC(H/D) : 0320/00800
ASI : -
UPART : BSSAP MGW : MGW01

FQDN : -

AUTOMATIC CONGESTION CONTROL

REJ11 : - REJ12 : - REJ21 : - REJ22 : -

ACT11 : NO ACTION ACT12 : NO ACTION ACT21 : NO ACTION ACT22 : NO ACTION

SELECTIVE CIRCUIT RESERVATION

TRES1 : - TRES2 : -
DR1A : - DR2A : - ART1A : - ART2A : - ACTA : NO ACTION
DR1B : - DR2B : - ART1B : - ART2B : - ACTB : NO ACTION
DR1C : - DR2C : - ART1C : - ART2C : - ACTC : NO ACTION

CIRCUIT(S)

TERMID ORD CTRL HGR STATE CCSPCM UNIT

14-1 1 X 1-1 WO-EX 0 BSU , 0

14-2 2 X 1-2 WO-EX 0 BSU , 0

For public use – IPR applies

12 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Routing) in MSS
Route data
RRI:GSW:ROU=320:;

MSCi DX220-LAB 2004-06-14 15:39:58

ROU TYPE OUTR STP TSG TMT SAT ATME DCME ECHO CONT TON SEQH ICR
320 EXT OMCG0 1 - - N N N N N UNK N N

RCR MCR OCR RPR PBX ISDN STATE NCGR

N N N N N N WO-EX BSC02

APRI ASTC NCCP T_IND ENBLOC ATV

N N MAS 0 - -

CLISET NCLISET
0 DEFAULT

AICR PNR RNPR RFCL PCLI NEF

- - - - - NONE

UPDR
-

FCL
-

For public use – IPR applies

13 © Nokia Siemens Networks Presentation / Author / Date / Document Number
BSC integration (Routing) in MGW

RCI:SEA=3:CGR=320:PRINT=5:;

CIRCUIT GROUP(S)

CGR : 320 NCGR : BSC02

TYPE : SPE STATE : WO-EX FORMAT : PCM-TSL

NBCRCT : 15 LSI : - NET : -
SPC(H/D) : -
USE : VMGW

ADDITIONAL PARAMETERS:

POOLID : 0

ECHO : NO

CIRCUIT(S)

PCM-TSL ORD CTRL HGR STATE LSI

14-1 1 X 1-1 WO-EX -

14-2 2 X 1-2 WO-EX -

For public use – IPR applies

14 © Nokia Siemens Networks Presentation / Author / Date / Document Number