Scribd
Upload
1K views23 pages

Electric Motor Design Using Ansys Maxwell

This document summarizes the design and analysis of three electric motor projects using Ansys Maxwell software. It describes the specifications, analytical results, and 2D analysis results for a 1 kW BLDC motor, a 12.5 kW radial flux PMSM for in-wheel applications, and a 12.5 kW axial flux PMSM also for in-wheel applications. It also briefly outlines the specifications and results for a 10 kW mid-drive PMSM and includes sections on other projects, practice simulations, motor CAD simulation, and certifications.

Uploaded by

AJAY N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
1K views23 pages

Electric Motor Design Using Ansys Maxwell

This document summarizes the design and analysis of three electric motor projects using Ansys Maxwell software. It describes the specifications, analytical results, and 2D analysis results for a 1 kW BLDC motor, a 12.5 kW radial flux PMSM for in-wheel applications, and a 12.5 kW axial flux PMSM also for in-wheel applications. It also briefly outlines the specifications and results for a 10 kW mid-drive PMSM and includes sections on other projects, practice simulations, motor CAD simulation, and certifications.

Uploaded by

AJAY N
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 23

Electric Motor Design Using Ansys

Maxwell
DONE BY
AJAY N
SPECIFICATION

Motor Type: BLDC


Power rating : 1 kw
RPM : 400 RPM
TORQUE : 23 Nm
Terminal voltage : 48 Volts
Configuration : Radial Flux Machine and Outrunner Machine.
Analytical Results

Output Power – 1.1 kw


Input power – 1.181 kw
Efficiency – 84 %
Speed – 404 Rpm
Rated Torque - 23 Nm
Total Weight : 5 kg
SLOTS – 48
POLES – 52
0D – 180 mm
length – 40 mm
RESULTS
MAXWELL 2D ANALYSIS

MESH OPERATION
MAGENTIC FLUX OPERATION
GENERATED MODEL
MAXWELL 2D ANALYSIS RESULTS

TORQUE WAVEFORM

CURRENT WAVEFORM

INDUCED VOLTAGE
SPECIFICATION
Application : Inwheel application
Motor Type: PMSM
Power rating : 12.5 kw
RPM : 750 RPM
TORQUE : 159 Nm
Terminal voltage : 110 Volts
Configuration : Radial Flux Machine and Outrunner Machine.
ANALYTICAL RESULTS
Output Power – 12.5 kw
Input power – 13.1 kw
Efficiency – 93 %
Speed – 750 Rpm
Rated Torque - 159 Nm
Total Weight : 16 kg
SLOTS – 28
POLES - 30
OD – 400 mm and length – 40 mm
RESULTS
RESULTS
SPECIFICATION
Application : Inwheel application
Motor Type: PMSM
Power rating : 12.5 kw
RPM : 750 RPM
TORQUE : 159 Nm
Terminal voltage : 110 Volts
Configuration : Axial Flux Machine.
Analytical Results

Output Power – 12.5 kw


Input power – 14.5 kw
Efficiency – 90 %
Speed – 750 Rpm
Rated Torque - 159 Nm
Total Weight : 16 kg
SLOTS – 18
POLES – 16
OD – 300 mm and Length – 30 mm
RESULTS
Specification
Application : Mid drive Motor
Motor Type: PMSM
Power rating : 10000 kw
RPM : 3000 RPM
TORQUE : 31 Nm
Terminal voltage : 72 Volts
Configuration : Radial Flux Machine.
Analytical Results

Output Power – 10 kw
Input power – 10.3 kw
Efficiency – 96 %
Speed – 3000 Rpm
Rated Torque - 31 Nm
Total Weight : 12 kg
SLOTS – 36
POLES – 8
OD – 140 mm and Length – 150 mm
RESULTS

TORQUE

Flux Linkage
RESULTS
Efficiency Map
OTHER PROJECTS

PRATICE
SIMULATIONS
Motor Cad Simulation
Power Rating :200 watts
RPM :3000 rpm
TORQUE :0.28 Nm
Certification
Certification
THANK YOU

You might also like