Ethernet Cable Configuration
Uploaded by
Juanito Esplana Jr.Ethernet Cable Configuration
Uploaded by
Juanito Esplana Jr.SETTING-UP COMPUTER NETWORKS
LO 1 Install network cables
Ethernet Cable
Configuration
LEARNING OBJECTIVES
After the end of the lesson, Student must be able to:
Identify and configure Ethernet cable
a. Straight Through (T568B) configuration
b. Straight Through (T568A) configuration
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
LOOKING BACK
WHAT IS A COMPUTER NETWORK?
Internet Patch Panel (front)
Printer
Patch Panel (back)
T568B
Network Switch Modular box
Router (Ethernet RJ45) Server
(Linux/Windows)
Wireless (Laptop)
Modular box
T568B (Ethernet RJ45)
It is a group of
Wireless access point
computers Personal
Computer
Wireless (Laptop) interconnected (client)
with one another
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
WHAT ARE THE TOOLS AND MATERIALS NEEDED IN
CONNECTING DEVICES USING WIRED CONNECTION?
Wire Stripper
RJ45
(Registered Jack)
(Pass Through)
Crimping Tool
CAT5e UTP Cable
(Unshielded
Twisted Pair)
Network Cable
Tester
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
INTRODUCTION
An effective Ethernet cable configuration
is one that provides stable and proper
wire crimp in every termination.
We need focus and awareness of the
safety in our workplace in performing
Ethernet cable configuration or the OHS
Standard. (Occupational Health and
Safety Standards)
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
What is Straight Through Cable?
A straight through cable is a type of
twisted pair cable that is used to
connect a computer to a local area
network, such as a switch.
It connects two dissimilar devices.
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
What are the two wiring standard?
T568A AND T568B WIRING STANDARD
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
HOW TO CONFIGURE
PROCEDURES 5. While holding the wires firmly
cut-off the wires ½” from the
1. Strip the cable jacket one full cable.
inch. 6. Insert the wire into the RJ45
2. Untwist the wires. connector.
3. Arrange the wires according to 7. Inspect each wire is flat even at
the selected color-coding the front of the RJ45 Connector.
scheme or pinout (T568B or 8. Carefully Insert into the crimping
T568A). tool and firmly crimp the RJ45.
4. Grasp the wires and flattened 9. Use a network cable tester to
them between your thumb and test your Ethernet cable.
forefinger. 10. DO Step 1 to 9 at the other end
of the Cable.
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
IMPORTANT NOTES
• Ethernet cable configuration is the process of creating LAN
cable that is used for interconnecting computers, routers,
switches and other network devices.
• Straight Through Cable configuration is used to connect
different network devices.
• A straight-through cable uses one wiring standard in
terminating both ends of the cable.
CORE COMPETENCY CSS NC II BY: JUANITO B. ESPLANA JR.
COMPUTER SYSTEM SERVING NC II
GRADE 11
[email protected]
09669810479
