Chapter 5
Domain Name System
25.1
Figure 25.1 Example of using the DNS service
25.2
25-1 NAME SPACE
To be unambiguous, the names assigned to machines
must be carefully selected from a name space with
complete control over the binding between the names
and IP addresses.
Topics discussed in this section:
Flat Name Space
Hierarchical Name Space
25.3
25-2 DOMAIN NAME SPACE
To have a hierarchical name space, a domain name
space was designed. In this design the names are
defined in an inverted-tree structure with the root at
the top. The tree can have only 128 levels: level 0
(root) to level 127.
Topics discussed in this section:
Label
Domain Name
Domain
25.4
Figure 25.2 Domain name space
25.5
Figure 25.3 Domain names and labels
25.6
Figure 25.4 FQDN and PQDN
25.7
Figure 25.5 Domains
25.8
25-3 DISTRIBUTION OF NAME SPACE
The information contained in the domain name space
must be stored. However, it is very inefficient and also
unreliable to have just one computer store such a huge
amount of information. In this section, we discuss the
distribution of the domain name space.
Topics discussed in this section:
Hierarchy of Name Servers
Zone
Root Server
Primary and Secondary Servers
25.9
Figure 25.6 Hierarchy of name servers
25.10
Figure 25.7 Zones and domains
25.11
Note
A primary server loads all information
from the disk file; the secondary server
loads all information from
the primary server.
When the secondary downloads
information from the primary, it is called
zone transfer.
25.12
25-4 DNS IN THE INTERNET
DNS is a protocol that can be used in different
platforms. In the Internet, the domain name space
(tree) is divided into three different sections: generic
domains, country domains, and the inverse domain.
Topics discussed in this section:
Generic Domains
Country Domains
Inverse Domain
25.13
Figure 25.8 DNS IN THE INTERNET
25.14
Figure 25.9 Generic domains
25.15
Table 25.1 Generic domain labels
25.16
Figure 25.10 Country domains
25.17
Figure 25.11 Inverse domain
The inverse domain is used for mapping an address to a name. When the server has received a
request from the client, and the server contains the files of only authorized clients. To determine
whether the client is on the authorized list or not, it sends a query to the DNS server and ask for
mapping an address to the name
25.18
25-5 RESOLUTION
Mapping a name to an address or an address to a
name is called name-address resolution.
Topics discussed in this section:
Resolver
Mapping Names to Addresses
Mapping Addresses to Names
Recursive Resolution
Caching
25.19
Figure 25.12 Recursive resolution
25.20
Figure 25.13 Iterative resolution
25.21
25-6 DNS MESSAGES
DNS has two types of messages: query and response.
Both types have the same format. The query message
consists of a header and question records; the
response message consists of a header, question
records, answer records, authoritative records, and
additional records.
Topics discussed in this section:
Header
25.22
Figure 25.14 Query and response messages
25.23
Figure 25.15 Header format
25.24
25-7 TYPES OF RECORDS
Two types of records are used in DNS. The question
records are used in the question section of the query
and response messages. The resource records are used
in the answer, authoritative, and additional
information sections of the response message.
Topics discussed in this section:
Question Record
Resource Record
25.25
25-8 REGISTRARS
How are new domains added to DNS? This is done
through a registrar, a commercial entity accredited by
Internet Corporation for Assigned Names and
Numbers (ICANN). A registrar first verifies that the
requested domain name is unique and then enters it
into the DNS database. A fee is charged.
25.26
25-9 DYNAMIC DOMAIN NAME
SYSTEM (DDNS)
The DNS master file must be updated dynamically.
The Dynamic Domain Name System (DDNS) therefore
was devised to respond to this need. In DDNS, when a
binding between a name and an address is determined,
the information is sent, usually by DHCP to a primary
DNS server. The primary server updates the zone. The
secondary servers are notified either actively or
passively.
25.27
25-10 ENCAPSULATION
DNS can use either UDP or TCP. In both cases the
well-known port used by the server is port 53. UDP is
used when the size of the response message is less than
512 bytes because most UDP packages have a 512-byte
packet size limit. If the size of the response message is
more than 512 bytes, a TCP connection is used.
25.28
Note
DNS can use the services of UDP or TCP
using the well-known port 53.
25.29
