VERY HIGH SPEED INTEGRATED CIRCUIT

HARDWARE DESCRIPTION LANGUAGE

LECTURE - I

Presented By :
Parag Parandkar
Assistant Professor,
Chameli Devi School of Engg., Khandwa
Road, Indore (M.P.), India – 452020
Email: [email protected],
[email protected]
Contact: +919826139931
 ACKNOWLEDGEMENT
The Presenter would like to thank and
acknowledge the power point presentation slides
of VHDL – A Comprehensive tutorial by
anonymous.
 CONTENTS COVERAGE
 Introduction
System design approach with HDLs
History of VHDL
Why VHDL ?
 Simulation Fundamentals
Simulation Cycle
Digital Simulator
 Modeling of Hardware
 Language Basics
Building Blocks in VHDL
Design Units and Libraries
 INTRODUCTION
System Design Approach with HDLs
HDL is mostly related to the front end part of the
design flow where a system is described with
programming language constructs.
A complex system can be easily decomposed into
smaller pieces : improves modularity
Allows a design to be simulated and synthesized
before being manufactured.
Eliminates hardware prototyping expenses

Reduces design time

Increases design reliability at lower costs/time

req.
 INTRODUCTION(CONTD.)
Typical Design flow
Algorithm

Level of
HDL Description (Behavioral) abstraction
Register Transfer Level

simulation and
verification

Synthesizer

Structural Description
Technology mapping (with ready-made primitives)
+ Floor Planning
Physical Layout
 INTRODUCTION(CONTD.)
 Why
VHDL ?
Public Availability
Developed initiated under Government Contract
Now is an IEEE standard

Design Methodology and Design Technology

Support
Technology and Process Independent
Wide Range of Descriptive capabilities
Digital System (e.g. box) level to gate level
Capability of mixing descriptions

Design Exchange
Large Scale Design and Design re-use
 WHAT’S VHDL
 Very High Speed Integrated Circuit Hardware
Description Language
 Can be used to
Describing,
Modeling, and
Designing digital systems
 For the goals of
Requirement specification
Documentation
Testing using simulation
Verification
Synthesizing digital circuits
 SIMULATION FUNDAMENTALS
 Purpose of simulation is to verify the behavior of
a system by applying stimulation at the inputs
and monitoring the response of the system over a
period of time.
 There are three types of simulators :
 Purely analog simulator.
 A simulator with both digital and analog simulation capabilities.
 Purely digital simulator.
 In digital simulation only logic level of the
measured quantity is determined; no precise
value is required.
 In analog simulation the precise values of the
measured quantities are determined
 SIMULATION
FUNDAMENTALS(CONTD.)
 The system is described with a Hardware
Description Language (HDL). The design
contains a number of concurrently operating
blocks connected with each other by signals.
 Maintains node values at logic level.
 Maintains a time wheel to model propagation of
time.
 Evaluates circuit behavior at intervals of time.
The interval is chosen as the smallest unit of time
after which a node can change its state.
 MODELING HARDWARE
The VHDL Language
 A language for describing digital and analog
systems.
 Makes no assumptions about the technology.
 Multiple levels of abstraction for modeling
Behavioral
Structural
Dataflow
Mixed
 Behavioral model, timing model and structural
model are integrated.
 A VHDL process models a block and a VHDL
signal models the connection between different
blocks.
 STRUCTURAL MODEL
 Digitalcircuits consist of components and
interconnection between them.
 A component can in turn be composed of sub-
components and their interconnections.
 A component interacts with other components
through pins.
 Component is modeled as entity.
 Component pins are modeled as ports.
 Interconnections between components are
modeled as signals.
 BEHAVIORAL MODEL
 The behavior of a component is modeled inside
an architecture body of the entity
 It may be described using a collection of
concurrently executing statements
 A concurrent statement is sensitive to a set of
input signals and is executed whenever any of its
sensitive signal changes its value
 A concurrent statement called process statement
can contain one or more sequential statements
 A set of sequential statements can be clubbed
together in a subprogram
 DATAFLOW MODEL
 The flow of data through the entity is modelled
primarily using concurrent signal assignment
statements.
 The structure of the entity is not explicitly
specified but it can be implicitly deduced.
 Architecture MYARCH of MYENT is
 begin
 SUM <= A xor B after 8ns;
 end MYARCH;
 A SIMPLE EXAMPLE
entity Xor_gate is
port (in1, in2 : in bit; Out1 : out bit);
end Xor_gate ;
architecture behavioral of Xor_gate is
begin
process
begin
Out1 <= In1 xor In2;
wait on In1, in2;
end process;
end behavioral;
 VHDL LIBRARIES DESIGN UNITS
 A VHDL library is a host dependent storage facility for
intermediate-form representations of analyzed design
units
 A design unit is a VHDL construction that can be
independently analyzed and stored in a design library. A
design unit may be a primary or a secondary one.
 Primary design unit
 entity decl, package decl and configuration decl
 Secondary design unit
 architecture body and package body
 In a library, there can be only one primary unit of same
name but there can be multiple secondary units by same
name
 A secondary unit can have name same as primary unit
 BUILDING BLOCKS IN VHDL
 EntityDeclaration
 generic, port, declarations, statements
 Architecture Body
 declarations, statements
 Subprogram Declaration
 parameter - list
 Subprogram Specification
 declarations statements
 Package Declarations
 declarations
 Package Bodies
 declarations, subprogram body
 ENTITY
 provides a name to the component
 contains the port definitions in the interface
list
 can contain some generic definitions which can
be used to override default values
 entity identifier is
 generic interface_list;
 port interface_list;
 declarations
 begin
 statements
end [entity] [identifier];
 EXAMPLE
entity Adder is

port ( A : in Bit; A Sum

B : in Bit; B Adder Cout
Sum : out Bit;
Cout : out Bit );

end Adder;
 ARCHITECTURE
 encapsulates the behavior and timing information
 contains a number of concurrent statements
 there can be multiple architecture bodies for a
given entity

architecture identifier of entity_name is

 declarations
begin

 statements
end [architecture] [identifier];
 EXAMPLE-1

architecture Behavioral_Desc of Adder is

begin
process (A, B)
Sum <= A or B;
Cout <= A and B;
end process;
end Behavioral_Desc
 EXAMPLE-2
architecture Struct_Desc of Adder is
-- declarations
component Or_Comp
port ( X : in Bit; Y : in Bit; Out : out Bit);
end component;
component And_Comp
port ( X : in Bit; Y : in Bit; Out : out Bit);
end component;
begin
-- component instantiations
A1 : Or_Comp port_map ( X => A, y =>B, Out => SUM);
B1 : And_Comp port_map ( X => A, y =>B, Out => Cout);
end Struct_Desc;