0% found this document useful (0 votes)
53 views21 pages

CRT Display: Prepared By: Hinal Lunagariya

CRT displays work by using an electron gun to produce a scanning electron beam that excites phosphor on the inside of the screen, producing light and thus a visible image. Early CRTs were monochrome, then grayscale, and color CRTs used an arrangement of three electron beams and color phosphors to produce color. CRTs were the dominant display technology for decades but have been largely replaced by flat panel LCD and LED displays due to their bulkier size and potential health concerns over radiation emissions.

Uploaded by

Rakoto Malala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
53 views21 pages

CRT Display: Prepared By: Hinal Lunagariya

CRT displays work by using an electron gun to produce a scanning electron beam that excites phosphor on the inside of the screen, producing light and thus a visible image. Early CRTs were monochrome, then grayscale, and color CRTs used an arrangement of three electron beams and color phosphors to produce color. CRTs were the dominant display technology for decades but have been largely replaced by flat panel LCD and LED displays due to their bulkier size and potential health concerns over radiation emissions.

Uploaded by

Rakoto Malala
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 21

CRT DISPLAY

Prepared by: Hinal Lunagariya


History

The earliest version of the CRT was known as the "Braun tube",
invented by the German physicist Ferdinand Braun in 1897.

In 1907, Russian scientist Boris Rosing used a CRT in the receiving


end of an experimental video signal to form a picture.

The first commercially made electronic television sets with cathode


ray tubes were manufactured by Telefunken in Germany in 1934.
Displays

• Emissive display  convert electrical energy into light


- Cathode ray tube (CRT)
- Flat panel CRT
- Plasma panels (gas-discharge display)
- Thin-film electroluminescent (EL) display
- Light-emitting diodes

• Non-Emissive display  optical effect: convert sunlight or light from other


source into graphic patterns.
- Liquid-crystal device (LCD) – flat panel
- Passive-matrix LCD
- Active-matrix LCD
Monitor Types

Monochrome

Grayscale

Color
Monochrome Monitor
A monochrome monitor is a type
of CRT computer display which was
very common in the early days of
computing.

They are still widely used in


applications such as computerized
cash register systems.

Green screen was the common


name for a monochrome monitor.
Grayscale Monitors
A special type of monochrome monitor
capable of displaying different shades of
gray.

They are also known as black-and-


white, are composed exclusively of
shades of gray, varying from black at the
weakest intensity to white at the
strongest.

Early grayscale monitors can only


show up to sixteen different shades.
Color Monitors
A display monitor capable of displaying many colors.

Color Monitors works like a monochrome one, except that there are three
electron beams instead of one.

The three guns represent additive colors (red, green and blue) although the
beam they emit are colorless.

Each pixel includes three phosphors, red, green and blue, arranged in a
triangle.

When the beam of each of these guns are combined and focused on a
pixel, the phosphors light up.
Color Monitors
The monitors can display different colors by combining various intensities
of three beams.
Color CRTs are much more complicated. It requires manufacturing very
precise geometry.
Mixing of Colors
It Consists of..

CRT Focusing coil


Anode Deflecting coil
Cathode Fluorescent screen
Shadow mask
How It Works?
How It Works?
Cathode rays are emitted by an electron gun.

accelerated by a high positive voltage near the face of the tube

forced into a narrow stream by a focusing system

directed toward a point on the screen by the magnetic field generated by the
deflection coils

hit onto the phosphor-coated screen

phosphor emits visible light, whose intensity depends on the number of


electrons striking on the screen
How It Works?
Electrons travel through a vacuum sealed container from the cathode
(negative) to the anode (positive).

Because the electrons are negatively charged, they are repelled away from the
cathode, and move across the tube to the anode.

The ray can be affected by a magnet because of its relation to positive and
negative charges.

A CRT monitor contains millions of tiny red, green, and blue phosphor dots that
glow when struck by an electron beam. Electron beam travels across the screen to
create a visible image.

Dot mask ensures proper pixel is lit.


Phosphore

It is a semi-conducteur material which emits visible radiation in response


to the impact of electrons.

when it absorbs energy from some source such as an electron beam, it


releases a portion of this energy in the form of light.

In response to a sudden change in the electron beam(from on to off), the


light emission does not fall instantaneously, there is a gradual reduction
called ‘fluorescence’ .
CRT Display Principles
Sample of Random-Scan displays principles.
Beam-penetration is used.
CRT Display Principles
Electron beam swept across screen one row at a time from top to bottom in
raster-scan.
Shadow mask.
Color CRT Monitors

Delta electron gun arrangement In-line electron gun arrangement


Color CRT Monitors
• Operation of delta-delta, shadow mask CRT
Properties of the CRT
• Phosphor Persistence (PP)
- the light output decays exponentially with time.
- a phosphor’s persistence is defined as the time from the removal of
excitation to the moment of decaying the light to one-tenth of its
original intensity
- low persistence -> good for animation
- high persistence -> good for static picture with high complexity
- typical range: 10ms – 60ms
• Refresh rate (RR)
- number of times per second the image is redrawn (e.g., 60 or higher)
• Resolution
- the maximum number of points that can be displayed without overlap on
a CRT
- high-definition system, e.g. 1280 * 1024 pixels
- resolution depends on the type of phosphor, the intensity to be
displayed, focusing and deflection systems, size of video memory

• Horizontal scan rate


- the number of scan lines per second that the CRT is able to display
Pros of CRT
The cathode rayed tube can easily increase the monitor’s brightness by
reflecting the light.

They produce more colours

The Cathode Ray Tube monitors have lower price rate than the LCD
display or Plasma display.

The quality of the image displayed on a Cathode Ray Tube is superior to


the LCD and Plasma monitors.

The contrast features of the cathode ray tube monitor are considered
highly excellent.
Cons of CRT
They have a big back and take up space on desk.

The electromagnetic fields emitted by CRT monitors constitute a health


hazard to the functioning of living cells.

CRTs emit a small amount of X-ray band radiation which can result in a
health hazard.

Constant refreshing of CRT monitors can result in headache.

CRTs operate at very high voltage which can overheat system or result in an
implosion.

Within a CRT a strong vacuum exists in it and can also result in a implosion.

They are heavy to pick up and carry around

You might also like