Marine Cat Connect

Cat® Remote Asset Monitoring (RAM)

April 2018
Hardware Details & Set Up Process

Caterpillar: Confidential Green

 Agenda

• Cat® Connect for Marine

• Elite Series Hardware for Cat® RAM
– Specifications
– Installation requirements
• Generation Series Hardware for Cat® RAM
– Specifications
– Installation requirements
• Set Up Process

Caterpillar: Confidential Green

 Cat Connect for Marine
Marine Inform Project Launching Cat Remote Asset Monitoring (RAM)
“INFORM” “ADVISE”
Remote Monitoring CBM / CBO “PARTNER”
Integration with
/ Performance
try
Customer

dus rise CMMS

Sharing
In terp (ex. AMOS)
En AI - Shore Edition
ASSETS COVERED

AI - Vessel Edition

t
ee
Fl
Cat
Remote Asset
Monitoring

ing )
Th gine
n
(E
Events & Alerts Predictive Recommendations

COMPLEXITY
(Data Analytics) Move to “Blue Ocean” –
single source provider
with risk-sharing
agreements

Caterpillar: Confidential Green

 Cat Connect for Marine (Cheat Sheet)
Cat Connect Inform Inform Advise

Technology Cat Remote Asset Monitoring AI Historian Cat Asset Intelligence

Value to Customer • Location + Hours • All the data all the time • Predict failures with analytics
• Diagnostic codes • Structures data for viewing, extracting, • Optimize operations
• Simple sensor additions analyzing, comparing • Integrate with Maintenance System
• Serves as search engine for raw data • Total vessel / site

Value to Dealer • Location, hours & diagnostic • Equipment troubleshooting • Location, hours
codes • Building block for AI • Manage cost & risk
• Consulting w/ customer

Non-Cat? TBD Yes Yes

Non-engines? TBD Yes Yes

Suggested target segments* • Small OSVs, crewboats • Support of all AI segments • Cruise & Ferry
• Tug & Inland waterways • Defense (Patrol & larger)
• Dredge (low value) • Ocean Cargo & Factory Fishing
• Short sea shipping • Dredge (high value)
• Fishing • High value OSVs, Subsea

Potential segments* • Security • Tug

• Mega-yacht • Mega-yacht

Current NPI in progress Launched Q2 2017

Future Yes, available
Planned availability Q1 2018

*Target and potential segments are intended to provide quick guidance for which offerings would be relevant to a
customer by segment without in-depth analysis of that customer’s fleet.

HTTPS://ENGINES.CAT.COM/CATCONNECT-
Caterpillar: Confidential Green MARINE
 PRODUCT LINK ELITE HARDWARE
Marine Kit Part Numbers
Part Number Description
473-7723 PLE601 Kit (Ethernet)
473-7722 PL641 Kit (Cellular)
466-5531 DIN Rail 5 Port Ethernet Switch
488-9017 IP 67 Ethernet Switch
477-7154 Optional Engine Extension Harness (1m)
477-7155 Optional Engine Extension Harness (3m)
476-7003 Optional 15m Coax Cable for single mode communication
476-9987 Optional 15m Coax Cable for GPS

• Product Link Operation and Maintenance Manual (SEBU8832)

• Product Link Parts Manual (SEBP7029)
• Product Link Installation Guide (REHS8850)
• Product Link System Operation and Troubleshooting Guide (UENR5823)
• Marine Engine Telematics Electrical Schematics (UENR7806)
• Product Link Special Instructions for Install Guide (M0068740)

Caterpillar: Confidential Green

 Product Link Generation Hardware

Technical Specifications

Description PLG641 PLG601

Ethernet 10/100 Mbit/s 10/100 Mbit/s
3G/GSM/GPRS Five Band 3G/UMTS (WCDMA/FDD): 850/800, 900, 1900, 2100 -
MHz Quad-Band GSM/GPRS: 850, 900, 1800, 1900 MHz

Antenna Connector Mobile SMA female -

GPS Built-in -
Antenna Connector GPS SMA female (active or passive antenna) -
USB Interface Micro USB, USB 2.0 Micro USB, USB 2.0
Relay Output (max 24, AC/DC, 1A) 1 1
Digital Inputs (dry contact) 2 (DI 1 - LPM, DI2 - configurable)* 2 (DI 1 - LPM, DI2 - configurable)*
Analog Inputs (PT100, 0-10 VDC or 10-20 mA) 4 (all supporting 0-10 VDC or 0-20 mA and AI1/AI3 supporting 4 (all supporting 0-10 VDC or 0-20 mA and AI1/AI3
PT100) supporting PT100)
Serial Port #1 RS232 (1.2 kbit/s to 115.2kbit/s) RS232 (1.2 kbit/s to 115.2kbit/s)
Serial Port #2 RS485 (1.2 kbit/s to 115.2kbit/s) RS485 (1.2 kbit/s to 115.2kbit/s)
CAN J1939 Port 4-pin terminal block 4-pin terminal block
Protocols Modbus-RTU, Modbus TCP, CAN J1939 Modbus-RTU, Modbus TCP, CAN J1939
Wall mounting/DIN Rail ** Yes/Yes Yes/Yes
Mechanical Dimensions (H x W x D) 25.6 x 135 x 92 mm 25.6 x 135 x 92 mm
Operating Temperature -40 to +65 ˚C -40 to +65 ˚C
Storage Temperature -45 to +85 ˚C -45 to +85 ˚C
Humidity Range 5-95%, RH, non-condensing 5-95%, RH, non-condensing
Power Supply 9-32 VDC, 6W, LPS 9-32 VDC, 6W, LPS
Power Consumption (max at 24 VDC) 4.5W 2.5W
Certifications CE, RoHS, Telec, JATE, UL, FCC, IC, PTCRB, RCM CE, RoHS, UL
Housing Metal, IP20 Metal, IP20

*Digital input 1 +/- is a dedicated input used for triggering low power mode (LPM) on the device.
**with DIN rail mounting kit

Caterpillar: Confidential Green

 PLG RETROFIT KITS / PARTS
Kit / Part Description Part Contents
Name Number(s)
PLG601 Installation Kit Product Link • 488-0991 • PLG 6 hardware
Generation Series • PLG mounting
hardware hardware
• Ethernet • Wiring Harness
connection
PLG641 Installation Kit Product Link • 488-0992 • PLG hardware
Generation Series • w/ stub
hardware antenna
• Cellular • w/ SIM card
Connection • PLG mounting
• Ethernet hardware
Connection • Wiring harness
• GPS Antenna (1 M)
PLG641 External Antenna provides GPS • 499-0689 • Antenna w/ 1 M harness
Antenna (Optional) and cellular or satellite • Mounting plate &
connections hardware

NOTE: Extension cables

sold separately.
Antenna Extension Extension cable for use • 516-5946 (1.5 M) • Single extension cable
Cable (Optional) with PLG641 external • 491-9577 (3 M)
antenna • 491-9578 (5 M) NOTE: Two extensions
needed per antenna – 1 for
GPS & 1 for cellular /
satellite connections

Caterpillar: Confidential Green

* Prices are subject to change.
 PLG601 Kit Consist

Caterpillar: Confidential Green

 PLG641 Kit Consist

Caterpillar: Confidential Green

 + The PLG kit contains bushings
or rubber isolation mounts which
MUST be utilized when installing
the hardware device.
Caterpillar: Confidential Green

+ The bushings provide the

electrical isolation for the
hardware.

PLG Kit
Caterpillar: Confidential Green
10
 + 90 degree stub Cellular Antenna + GPS magnetic mount antenna
connects directly to the PLG641 with 4M cable connects directly
to PLG641

Note: Many factors may effect the strength of the cellular connection.
As a result, it may be necessary to utilize the optional cellular antenna
to provide adequate signal strength.
PLG641
Field
Caterpillar: Confidential Green
11
 PLG FIELD INSTALLATION KIT WIRING

492-4281 Harness Connections

Wire Information Wire label (description)
105-A1 (Red) BTRY( +) (Battery positive)
229-A2 (Black) BTRY (–) (Battery negative)
A366-A5 (Blue) BTRY (–) AFTER DISCONNECT (Battery negative connection after battery disconnect switch)
N873-A8 (BARE) CAN SHIELD (Connection to primary CAN 1/CAN A)
F711-A6 (Yellow) CAN HI (+) (Connection to primary CAN/ 1CAN A)
F712-A7 (Green) CAN LO (–) (Connection to primary CAN 1/CAN A)

Caterpillar: Confidential Green

 Low Power Mode

• Low Power Mode alerts the customer or dealer that the asset’s alternator
battery supply is disconnected.
• 12 volt or 24 volt relay notifies the PLG that the genset neutral disconnect
has been switched to the OFF position
• Once Low Power Mode is detected, the PLG enters low power mode and
wakes up at certain intervals to report GPS location.
• If the GPS location does not change, then the PLG returns to sleep mode.
• If the GPS location does change the PLG device notifies the system that
GPS location has changed.
• A compact, back-up battery will be available later this year.

Caterpillar: Confidential Green

 PLG CONNECTIONS

Optional Connections (not included in the field retrofit harness)

 RS485 2-wire (half duplex) for connecting PLG6x1 to Modbus RTU supported devices. Follow proper
RS485 wiring practices.
 RS232 for connecting PLG6x1 to a single Data communication Equipment (DCE).
 LAN port for connecting PLG6x1 to Modbus TCP/IP supported devices using standard Ethernet cable.
 WAN for connecting PLG6x1 to local wide area network using standard Ethernet cable.
 Analog input(s) 1&3 for connecting PT100 sensors. Analog input(s) 1-4 for connecting voltage sensors
(0-10 VDC) or 0-20 mA current sensors.
 Digital input 2 for connecting PLG6x1 to dry contact input circuits.
 Relay output for connecting PLG6x1 to other circuits.

Caterpillar: Confidential Green

 Firmware
• Product Link Elite Series:
• Unit must have PLE601 459-0786 part number or later, which is within the
PLE601 kit (473-7723 (standard or later) or PL641 kit (473-7722 or later), and
the latest firmware. One PLE601 kit is needed per engine and one PL641 kit
is needed per vessel.
– For retrofit Elite series firmware can be found on SIS Web.
• PLE601 Firmware (TR Suffix Code): #535-8389 or later, PL641 Firmware: #539-5807 or later
• For Factory Fit Elite series firmware will already be included with the unit
• PLE631 will not work with the Cat RAM, however, satellite options are under
investigation
 
• Product Link Generation Series:
– For latest firmware information contact DSN.

Caterpillar: Confidential Green

 Configuration Files

• The configuration file allows information to flow from the asset or assets to
the PLE601/PLE614/PLG601/PLG641 device to the platform/back office
and into the user interface.

• PLE and PLG devices require a configuration file to communicate, collect

and display information from the asset. To help you understand what
specific parameters can be visualized in Cat RAM for a specific asset/site,
configuration support is available through the DSN. To receive this support
and the appropriate configuration file, complete the site assessment form
and submit it to the Dealer Solutions Network DSN. To download the site
assessment form visit Powernet

Caterpillar: Confidential Green

 Product Link Hardware Certification Status

• https://dealer.cat.com/en/products/technology/construction-
technology/product-link/product-link-hardware-certification.html

Caterpillar: Confidential Green

 Set Up Process for Product Link Generation Hardware

Caterpillar: Confidential Green

 + Record SIM card number
+ Record MAC address
+ Record prime product serial
number
+ Manufacturer Model and
Equipment Type

Phase 1 –
Installation -
Caterpillar: Confidential Green
19
 + Insert the SIM card into the PLG641
device while the PLG device is OFF.
+ Install SIM card prior to mounting the
PLG device
+ SIM card shipped loose w/ kit

+ SIM card determines the cellular

carrier
+ Can utilize a third party SIM card

Phase 1 –
Installation -
Caterpillar: Confidential Green
20
 + PLG Device Mounting
Considerations:
+ PLG device must be mounted in an
appropriate environment.
+ Rubber isolation mounts must be
installed on the hardware

Caterpillar: Confidential Green

Phase 1 –
Installation –
Caterpillar: Confidential Green
21
 Phase 1 – Installation– Install Antenna(s)

+ Install the 90 degree stub

cellular antenna
+ Install the GPS magnetic mount Caterpillar: Confidential Green

antenna
+ GPS antenna should be
mounted in the horizontal
position
+ Antenna cable attaches directly
to the PLG641 device

22
Caterpillar: Confidential Green
 + Remove both the 90 degree
stub antenna and the GPS
magnetic mount antenna Caterpillar: Confidential Green

+ Dual mode antenna (499-0689)

should have clear line of site to
the sky
+ Make correct coaxial cable
connections
+ Ensure coaxial cable does not
have any tight bends
Phase 1 –
Installation –
23
Caterpillar: Confidential Green
 Phase 1 – Installation – Connect Harness

492-4281 Harness Connections

Wire Information Wire label (description)
105-A1 (Red) BTRY( +) (Battery positive)
229-A2 (Black) BTRY (–) (Battery negative)
A366-A5 (Blue) BTRY (–) AFTER DISCONNECT (Battery negative connection after battery disconnect switch)
N873-A8 (BARE) CAN SHIELD (Connection to primary CAN 1/CAN A)
F711-A6 (Yellow) CAN HI (+) (Connection to primary CAN/ 1CAN A)
F712-A7 (Green) CAN LO (–) (Connection to primary CAN 1/CAN A)

Caterpillar: Confidential Green

 + Red wire + Positive post of starter
batteries/terminal block with direct
+ Black wire
connection to starter batteries
+ Blue wire + Negative post of starter batteries
+ Bare wire + Negative post of the battery
+ Yellow wire disconnect switch or isolator
+ Green wire (EMCP/ECU side of switch) or a
terminal block located after the
battery disconnect switch/isolator
+ TEE receptacle/ terminal block on
J1939 CAN Primary/CAN 1/Can A
Phase 1 – network
Installation –
Caterpillar: Confidential Green
25
 Phase 1 – Installation – Connect Relay

+ Connect the relay into the

harness connection
Caterpillar: Confidential Green

+ The 12 or 24 volt relay enables 12V

24V
sleep and the PLG device to
consume less power during low
power mode.
+ Ensure the equipment power is
off and battery disconnect is on
when installing harness

26
Caterpillar: Confidential Green
 Phase 2 – Activation – Software Definitions

• Firmware provides basic operational and communication instructions and is

stored in the flash memory of the device.
• Configuration file provides instructions regarding which data channels on
specific protocols will be collected from the asset.
• Configuration file allows data channels on Modbus or J1939/CAN to flow
from asset to the platform and finally into the user interface.

Caterpillar: Confidential Green

 Phase 2 – Activation – Software Configuration

• Firmware
– Preloaded retrofit kits
– Updates will be made Over The Air (OTA)
– Some instances may require a manual loading
• Configurations
– All Configurations for controls &/or equipment will need to be developed through a
DSN ticket

Caterpillar: Confidential Green

 + Objective:
+ Associate PLG device & SIM card to
specific asset
+ Required tools: Caterpillar: Confidential Green

+ Computer
+ Access to the internet

Phase 2 –
Activation –
Caterpillar: Confidential Green
29
 Phase 2 – Activation – Communication Settings

• Submit a DSN ticket and Site Assessment for activation

• For further reference material view Powernet
– engines.cat.com/catconnect-marine
– Tab Technical Support

Caterpillar: Confidential Green

 Phase 3 – Registration

• Objectives:
– Grant users access to Cat RAM
– Associate PLG device & asset to dealer & customer

• Step 1: Submit a DSN ticket with the following information for each user:
– CWS ID
– User’s company name (e.g. Riggs, Lowes, etc.)
– Email address
– Name of the “administrating” dealer
– Mobile phone number and carrier (optional)

Caterpillar: Confidential Green

 Phase 3 – Registration

• Step 2: Submit a DSN ticket with the following information for each user to
associate PLG device & asset to dealer & customer:
– Prime product serial number
– System ID (MAC ID)
– Name of the “administrating” dealer
– Customer name

• NOTE: Dealer will receive an e-mail confirming the asset has been
provisioned.

Caterpillar: Confidential Green

 SET UP PROCESS FOR PRODUCT LINK ELITE
HARDWARE
HARDWARE ACTIVATION PROCESS:
For PLE devices, please follow installation instructions found in REHS8850
(General) and for marine installations, M0068740. Record the engine/genset serial
number, the engine location and the the PLE devices associated MAC address.

Further documentation can be found on Powernet

Engines.cat.com-marine
Technical support tab

Caterpillar: Confidential Green

 Support Resources

• Dealer Solutions Network (DSN)

– Global DSN website https://gdsn.cat.com/mscrm
– Americas (North) 877-228-2420
– Americas (South) +11 507-305-2554
– Asia Pacific +1-309-578-7372
– EAME +1-309-578-7372
• Application Support Center (ASC)
– Website http://applicationsupport.cat.com/
– 765-448-2400
• Power Net

Caterpillar: Confidential Green

 QUESTION TO DEALERS:

Caterpillar: Confidential Green