Shri Dadaji Institute of Technology & Science
Shri Dadaji Institute of Technology & Science
Guided by Submitted by
Mr.Vijesh mukati sir Rohit Jain
Mr.Santosh mourya sir Vinayak jaiswal
Gaurav baheriya
Agenda
Introduction
Block Diagram
System Components
Circuit diagram and working
Applications
Advantages
Conclusion
Introduction
The first remote control, called “lazy bones” was
developed in 1950 by Zenith Electronics Corporation
(then known as Zenith Radio Corporation)
Remote controlled Fan Regulator is to increase the
comforts of life
Can be used around home or office from a distance
The aim of this work is to design and construct a remote
control for a fan regulator. The remote control device
sends an infra-red beam, which is received by the infra-
red sensor on the regulator and the speed of the fan is
increased.
Block Diagram
CIRCUIT DIAGRM AND WORKING
System Components
Infrared Receiver Module
IC NE555 Timer
Decade Counter
Transformer
Voltage Regulator
Opto Coupler
Opto Isolator
Triac
Resistors
Capacitors
INFRARED RECEIVER MODULE
Here the infrared module used is
a TSOP 1738 infrared receiver which
works on 38 KHz frequency.
The infrared module is used to
receive the transmitted signal from the remote
control.
IC NE555 TIMER
Here two NE 555 Ics are used one
as a simple monostable
multivibrator and another as a
voltage control oscillator.
The pin diagram of a IC 555
timer is shown in the figure.
DECADE COUNTER
Here IC CD4017 is used
as a decade counter
having sixteen pins.
The pin diagram of a
decade counter is shown
in the figure.
OPTO COUPLER
Here a six pin IC MCT2E is used
as a opto coupler.
A opto coupler is a combination
of isolated LED and a photo-
transisitor.
The circuit diagram of opto coupler
is shown in the figure.
OPTO ISOLATOR
Here a six pin IC MOC3021 is used
as a opto isolator.
The working of the opto isolator is
same as that of a coupler except
that it works on a higher potential
than that of a coupler.
REGULATOR
Here IC 7809 is used a a voltage
regulator.
It is a electrical regulator designed
to automatically maintain a
constant voltage level.
It is a 9V regulator regulates the
rectified 12V to 9V.
Applications
Remote Controlled Fan Regulator
Easy Assembly