0% found this document useful (0 votes)
157 views14 pages

Chapter 4 - Isometric Drawing

The document provides instructions for drawing 13 isometric views of differently shaped blocks. For each block, 3 side views are shown along with arrows indicating the direction for the isometric drawing. The isometric drawings are to be full size with a grid of 10 mm x 10 mm, and hidden details do not need to be shown. Figures 1 through 13 each show a different shaped block to draw in isometric view.

Uploaded by

Do The Cuong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
157 views14 pages

Chapter 4 - Isometric Drawing

The document provides instructions for drawing 13 isometric views of differently shaped blocks. For each block, 3 side views are shown along with arrows indicating the direction for the isometric drawing. The isometric drawings are to be full size with a grid of 10 mm x 10 mm, and hidden details do not need to be shown. Figures 1 through 13 each show a different shaped block to draw in isometric view.

Uploaded by

Do The Cuong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 14

CHAPTER 4 : ISOMETRIC DRAWING

1. Three views of shaped block are shown in Figure 1. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 1

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
2. Three views of shaped block are shown in Figure 2. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 2

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
3. Three views of shaped block are shown in Figure 3. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 3

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
4. Three views of shaped block are shown in Figure 4. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 4

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
5. Two views of shaped block are shown in Figure 5. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 5

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
6. Three views of shaped block are shown in Figure 6. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 6

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
7. Three views of shaped block are shown in Figure 4. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 7

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
8. Three views of shaped block are shown in Figure 8. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 8

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
9. Three views of shaped block are shown in Figure 9. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 9

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
10. Three views of shaped block are shown in Figure 10. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 10

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
11. Three views of shaped block are shown in Figure 11. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 11

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
13. Three views of shaped block are shown in Figure 13. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 13

LOCAL PUBLICATIONS (001427383-A)


CHAPTER 4 : ISOMETRIC DRAWING
13. Three views of shaped block are shown in Figure 13. Draw a full size
isometric view of the block in the direction of arrows shown. The size
of grid is 10 mm x 10 mm. All hidden details need not be shown.

FIGURE 13

LOCAL PUBLICATIONS (001427383-A)

You might also like