Power Steering

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 17

www.studymafia.

org

Seminar
On
Power Steering

Ch. Ganesh
18M61A0303
Introduction
Steering is the term applied to the collection of
components, linkages, etc. which allow for a car or
other vehicle to follow a course determined by its
driver.
History of Hydro-mechanical Power Steering
(HMPS)

Hydro-mechanical power steering was the


first type to be used on agricultural tractors in
the early 1950’s.
Suitable for small to medium tractors where
power steering can be an option to manual
steering.
Once the size of the tractor becomes too big
for manual steering, hydro-mechanical
steering is usually not cost effective.
General Circuit
Filters
Oil Filter
Preferably installed in
the return line.

A 10-micron or smaller
filter is recommended.

Air Breather Filter


The “breather” or vent
in the reservoir.
A 3-micron filter is
recommended.
Components in Power Steering


Pump


Steering gears


Rotary valve


Linkages
Components in Power Steering

Power Steering Pump


Usually a vane-type pump or similar.
Driven by the engine.
Power Cylinder
Double-acting differential cylinder.
Steering response to left and right turns is slightly
different. Hardly noticeable.
HMPS Type
4
The control valve and the actuator are mounted on

Most sophisticated
the steering column, the actuator drives the
design
pitman arm by rack and pinion or by crank arm
Requires little or no
steering linkage
means.
modification.
Requires larger space
envelope than other
types.
ROTARY VALVE
Split Gears

 It converts the rotational


motion of the steering
wheel into the linear
motion needed to turn
the wheels.

 It provides a gear
reduction, making it
easier to turn the wheels.
Recirculating-ball Steering

The first part is a block of
metal with a threaded
hole in it.

Works similar to a bolt
that sticks into the hole in
`
the block.

These are used in havy
duty comurcial
vehicles.
Power Rack-and-pinion
The Future of Steering - Drive by
Wire
 As the majority of today’s hydraulic power
steering systems are designed to have the
steering pump running constantly, pumping fluid
around the system, it wastes valuable horsepower,
which translates into wasted efficiency and
therefore fuel.
 One concept is the "steer-by-wire" or "drive-by-wire"
system. These system would completely eliminate the
mechanical connection between the steering wheel and
the steering, replacing it with a purely electronic control
system.
Advantages


Preventing the wheels from transferring the load
to the steering column

Reducing the driver’s fatigue

Low input torque and continuous steering
function

Oil output directly proportional to the steering
speed
Disadvantages


Design is compications and increased in cost.

Fluid leakage.
Conclusion

By studing all these we can conclude that the


power stering is nesessory for the modern cars.
Now a days we can see almost all cars having
a power steering.
It provides good handling to the driver, gives
better comfert, and make him less fatigue.
Reference

www.google.com
www.wikipedia.com
www.studymafia.org
Thank you

You might also like