Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    Compactlogix Remote Communication Via Teltonika Rut240 & 300

    Uploaded by

    Vinoth Kumar M
    This document discusses how to configure a Teltonika RUT240 or RUT300 router to remotely access a CompactLogix PLC via VPN. It describes initially configuring the router, adding the PLC as a device, creating a VPN hub and adding the PLC as a client, and configuring the VPN connection. It also discusses verifying the PLC's IP settings and network configuration, and how to add the remote PLC to RSLinx Classic software in order to upload, download, monitor and modify the PLC over the VPN connection.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Compactlogix Remote Communication Via Teltonika Rut240 & 300

    Uploaded by

    Vinoth Kumar M
    49 views17 pages
    This document discusses how to configure a Teltonika RUT240 or RUT300 router to remotely access a CompactLogix PLC via VPN. It describes initially configuring the router, adding the PLC as a device, creating a VPN hub and adding the PLC as a client, and configuring the VPN connection. It also discusses verifying the PLC's IP settings and network configuration, and how to add the remote PLC to RSLinx Classic software in order to upload, download, monitor and modify the PLC over the VPN connection.

    Original Title

    Compactlogix_Teltonika

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document discusses how to configure a Teltonika RUT240 or RUT300 router to remotely access a CompactLogix PLC via VPN. It describes initially configuring the router, adding the PLC as a device, creating a VPN hub and adding the PLC as a client, and configuring the VPN connection. It also discusses verifying the PLC's IP settings and network configuration, and how to add the remote PLC to RSLinx Classic software in order to upload, download, monitor and modify the PLC over the VPN connection.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    49 views17 pages

    Compactlogix Remote Communication Via Teltonika Rut240 & 300

    Uploaded by

    Vinoth Kumar M
    This document discusses how to configure a Teltonika RUT240 or RUT300 router to remotely access a CompactLogix PLC via VPN. It describes initially configuring the router, adding the PLC as a device, creating a VPN hub and adding the PLC as a client, and configuring the VPN connection. It also discusses verifying the PLC's IP settings and network configuration, and how to add the remote PLC to RSLinx Classic software in order to upload, download, monitor and modify the PLC over the VPN connection.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 17

     

    COMPACTLOGIX REMOTE COMMUNICATION


     VIA TELTONIKA RUT240 & 300

    1
    2 WHAT IS TELTONIKA AND ITS USE.

     It is device which we can use it as Wi-Fi router as well as VPN router based on our requirement.
     By using these modules we can access the PLC or other devices remotely. (i.e. upload,
    download, monitoring in online.)
    BASIC CONFIGURATION

     Initially the device has its default


    IP:192.168.1.1, to change the LAN IP and
    more setting we have type the default IP in
    chrome.
     The Login page will display as shown in
    attached picture
     Then we have enter the default user name
    and password
     User name: admin
     Password: Admin01
     Then click on login to change the LAN IP,
    password and to enable more settings.

    3
    BASIC CONFIGURATION

     Change password and user name if


    required.
     Change the LAN IP its segment should be
    similar to the device which you are
    communicate through router’s LAN port.
    (i.e. Router LAN IP: 192.168.0.10
    PLC IP: 192.168.0.40).

    4
    ADDING A DEVICE
     Enter RMS teltonika in Google search
    engine.
     Create RMS LOGIN to check the router
    status ,Client devices connected to the
    router and to establish VPN connection.
     Then we have to create the device
    configuration. Click on devices and select
    add new devices.
     Enter the name of your device, serial
    number and LAN mac ID.

    5
    VPN HUB CONFIGURATION
     Next step is to create VPN hub and
    configure the added device to the create
    VPN connection.
     Click on RMS VPN which is located on the
    below right side, then click on add new hub
    and enter the user name which you have
    created for RMS login then click on create.
     After creation click on that VPN hub and
    go to client option. Here we have to add the
    user and the device which is added to user.
     By clicking on add client we can add the
    user and its devices.

    6
    VPN CONFIGURATION
     Go to Routes option it will show you the
    user and device which you added in clients.
     Click the LAN forwarding button if the
    device is connected to the router through
    LAN port.
     Click on add route and select the auto scan
    it will shows all devices which are
    connected to the router through LAN port.
     If the device is not shown in auto scan.
    Choose manual and enter the IP address of
    the device and select the user.
     Here I have used another laptop for testing.
    VPN CONFIGURATION
     After configuring the device in router click
    on restart hub and go to client.
     Click on download option which is shown
    in user.
     Upload the downloaded file to the
    OPENVPN CONNECT software.

    8
    VPN CONFIGURATION
     Click on the downloaded file, it will run the
    software if it is installed in your pc.
     Ping the PLC IP.
     Now we can Upload , download and
    monitor the program remotely.

    9
    COMPACT LOGIX – REQUIRED SETTINGS
     Verify the PLC IP address’s segment
    should be same as router’s LAN port IP
    address.(i.e. PLC IP: 192.168.0.50
    Router’s LAN IP: 192.168.0.10 )
     Subnet mask should identical.
     PLC gateway IP should be router’s LAN
    port IP.
     PLC IP : 192.168.0.50
    SUBNET : 255.255.255.0
    PLC gateway IP : 192.168.0.1
    way
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Open RSLinx Classic Software
    Start  Rockwell Software RSLinx Classic
    Select Configure Drivers Icon

    11
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Select Available Driver types

    12
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Select Remote Devices via Linx Gateway
    Driver

    13
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Select Add new and give it a name
    (optional) or leave it as the default
     Need to Create new driver for each PLC.

    14
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Assign IP address of the CompactLogix
    PLC (which connected to Router as Client
    device)
     Client Device IP address will be available
    in Remote Management System VPN
    HUB Routes

    15
    RSLINX SETTINGS – TO ADD REMOTE PLC
     Verify the Driver status for PLC connection
     If PLC is Connected – Remote
    Upload/Download/Modifications can be
    carried out via Rslogix500 Software

    16
    17

    You might also like