NC PROGRAMMING

IE450 Manufacturing Systems

 Agenda
Introduction
Types of NC Machines
Components of a NC Machine
Control Mechanisms
Interpolation
Software Components
 Readings
• Chapters 9-10 of Computer
Aided Manufacturing, Wang,
H.P., Chang, T.C. and Wysk, R.
A., 2rd Edition ,1991.

• http://www.engr.psu.edu/cim/ie4
50/mllwrkbk.pdf
 Exercise
Readiness Assessment Test A.K.A.
RAT

AS A INDIVIDUAL,
INDIVIDUAL prepare a detailed
response for the Readiness
Assessment test found on the web
http://www.engr.psu.edu/cim/ie450/ie450r
at3.doc
(ratNC.doc in this module directory)

Open Book / Open Notes

 Objectives
• To be able to read and interpret an NC
part program
• To be able to create NC part programs for
milled parts
• To understand the difference between
world, machine and part coordinates
• To understand how to set machine offsets
• To execute an NC part program
 HISTORICAL
DEVELOPMENT
• 15th century - machining metal.
• 18th century - industrialization, production-type machine tools.
• 20th century - F.W. Taylor - tool metal - HSS
Automated production equipment -
Screw machines
Transfer lines
Assembly lines
using cams and preset stops
Programmable automation -
NC
PLC
Robots
 NEW NCs or
CNCs
•high speed spindle (> 20,000 rpm)

•high feed rate drive ( > 600 ipm)

•high precision ( < 0.0001" accuracy)

 NC
MACHINES
• Computer control
• Servo axis control
• Tool changers
• Pallet changers
• On-machine programming
• Data communication
• Graphical interface
 Group Exercise

As a group, discuss how you could justify

the purchase of an NC machine.
• What are the downsides for purchasing
an NC machine?
• Besides direct labor reductions, what
other benefits come from NC
machines?
 NC
MACHINES MCU - Machine control
unit
Machine
MCU Tool

CLU - Control-loops unit

CLU
DPU
DPU - Data processing
unit
 NC MOTION-
CONTROL NC Pro g ra m

Exe c u t io n
Sy s t e m

Dim e n s io n s Co m m a n d s

In t e rp o la t o r & T r a n s la t o r
Se rvo -c o n t ro l
Me c h a n is m

Co n t ro l Lo g ic Po we r Re la y

Lin e a r Mo t io n S o le n o id
 NC MACHINE
CLASSIFICATIONS
1. Motion control:
point to point (PTP)
continuous (contouring) path

2. Control loops:
open loop
closed loop

3. Power drives:
hydraulic, electric,or pneumatic
 NC MACHINE
CLASSIFICATIONS
4. Positioning systems:
incremental
absolute positioning

5. Hardwired NC and softwired

Computer Numerical Control (CNC)
 POINT TO POINT
• Moving at maximum rate from point to point.

• Accuracy of the destination is important but not the path.

• Drilling is a good application.

 CONTINUOUS
• PATH
Controls both the displacement and the
velocity.
• Machining profiles.
• Precise control.
• Use linear and circular interpolators.
 COMPONENTS OF AN NC
MACHINE TOOL

Machine table Gear Tachometer

Position box
Controller transducer
Motor

Leadscrew
Servo
drive

Magnetics control
cabinet
 NC MACHINE
• Accuracy
RATING
• Repeatability
• Spindle and axis motor horsepower
• Number of controlled axes
• Dimension of workspace
• Features of the machine and the
controller.
 NC
•ACCURACY
Accuracy = control instrumentation
resolution and hardware accuracy.
• Control resolution: the minimum
length distinguishable by the control
unit (BLU).
• Hardware inaccuracies are caused by
physical machine errors.
 HARDWARE
INACCURACIES
Component tolerances:
inaccuracies in the machine elements,
machine-tool assembly errors, spindle
runout, and leadscrew backlash.

Machine operation:
Tool deflection (a function of the cutting
force), produces dimensional error and
chatter marks on the finished part.
 HARDWARE
INACCURACIES
Thermal error:
heat generated by the motor operation,
cutting process, friction on the ways and
bearings, etc. Use cutting fluids, locating
drive motors away from the center of a
machine, and reducing friction from the
ways and bearings
REPEATABILIT
Y
Programmed position
Repeatability

Avg. error

Test result
 LEADSCREW
S
Converting the rotational motion of the motors to a linear motion.
Nut

Leadscrew

Pitch

pitch (p): the distance between adjacent screw threads

the number of teeth per inch (n):
n=1/p
BLU: Basic Length Unit (machine resolution)
BLU = p / N
 CONTROL
LOOPS
Open loop - No position feedback.
table

pulses motor

Use stepping motor.

 CONTROL
• LOOPS
A machine has 1 BLU = 0.001".To move the
table 5" on X axis at a speed (feed rate) of
6 ipm.
• pulse rate = speed/BLU = 6 ipm/0.001
ipp= 6,000 pulse/min
• pulse count = distance/BLU
= 5/0.001 = 5,000 pulses
 CLOSED
LOOP
Differential
_ amplifier Shaft

Up-down + DC Tacho-
DAC Amp Motor meter Encoder
counter

+
Reference pulses

Closed-loop control mechanism

 INTERPOLATIO
N simultaneously to
Control multiple axes
move on a line, a circle,
Y Y
or a curve.

(10,5) (10,5)

(3,2) (3,2)
X X
Point-to-point control path Linear path
(10-3) 7
Vx =6 = 6 = 5.5149
2
(10-3) + (5-2) 2 49+ 9
(5-2) 3
Vy =6 = 6 = 2.3635
2
(10-3) + (5-2) 2 49+ 9
 INTERPOLATOR
• S and circular
Most common : linear
• Since interpolation is right above the servo
level, speed is critical, and the process
must not involve excessive computation.
• Traditional NC interpolators: Digital
Differential Analyzer (DDA)
• Higher order curves, such as Bezier's
curve, use off-line approximation
algorithms to break the curves into linear
or circular segments.
 COORDINATE
SYSTEMS y z
y

• Right hand rule z x

• Z axis align with the spindle - +Z moves

away from the workpiece or the spindle.
• X axis - Lathe: perpendicular to the
spindle.
• Horizontal machine: parallel to the table.
• Vertical machine: +X points to the right.
 MACHINE
COORDINATES
Z X - Primary Feed axis
Z - Spindle axis
Y - Remaining axis

X
 PROGRAM
• STORAGE
Paper tape
Paper or Mylar coated paper.
• Diskettes
• From other computers through RS 232 or
local area network (LAN)
 SYMBOLIC
• ASCII
CODES
or ISO, use even parity
• EIA - Binary Coded Decimal (BCD), RS
244A standard, use odd parity.
 TAPE INPUT
• EIA RS-274FORMATS
standard

• Fixed sequential format

0010 01 07500 06250 00000 00000 612

• Tab sequential format

T0010 T01 T07500 T06250 T T T612

• Word-address format
N0010 G01 X07500 Y06250 S612
 Resource
sReference:
• Primary
Chang T-C., Wysk, R. A., and Wang, H-P., “Computer
Aided Manufacturing”, Prentice Hall International Series
in Industrial and Systems Engineering, Upper Saddle
Valley, NJ 07458. ISBN 0-13-754524-X
 Agenda
• Introduction
• Absolute and Incremental Programming
• Elements of NC Program
• NC Words (G, M, T, S, … Codes)
• Examples
• Cutter Compensation and Offsets
• Examples
• Conclusions
 Introduction to NC
programming
• Manual part programming
• Computer-assisted part programming
• Formats
– Fixed-Address
– Tab-Sequential
– Word-Address
 Manual NC
programming

• Absolute Programming
• Incremental Programming
• Example (on Board)
 Basic Elements of NC Program

• Blocks of Commands
• NC Words
• NC Function ~ NC word(s)
• Several Functions in one block
• When viewing, a block is same as a line of text
• Pre-defined Terminator
• Optional Blocks
 NC WORDS

• A G-code program consists the following

words:
N, G, X, Y, Z, A, B, C, I, J, K, F, S, T, R, M

• An EIA standard, RS-273 defines a set of

standard codes.
 Basic Elements of NC Program
a. Preparatory functions: which unit, which interpolator, absolute or
incremental programming, which circular interpolation plane, cutter
compensation, etc.
b. Coordinates: three translational, and three rotational axes.
c. Machining parameters: feed, and speed.
d. Tool control: tool diameter, next tool number, tool change.
e. Cycle functions: drill cycle, ream cycle, bore cycle, mill cycle,
clearance plane.
f. Coolant control: coolant on/off, flood, mist.
g. Miscellaneous control: spindle on/off, tape rewind, spindle rotation
direction, pallet change, clamps control, etc.
h. Interpolators: linear, circular interpolation
 NC WORDS – G codes
Table 9.1 G codes
g00 Rapid traverse g40 Cutter compensation - cancel

N code. g01 Linear interpolation g41 Cutter compensation - left

sequence *
g02 Circular interpolation, CW g42 Cutter compensation -right
number
example g03 Circular interpolation, CCW g70 Inch format

: N0010 g04 Dwell * g71 Metric format

G code. g08 Acceleration g74 Full circle programming Off

preparatory
word. g09 Deceleration g75 Full circle programming On

g17 X-Y Plane * g80 Fixed cycle cancel

*g18 Z-X Plane g81 -9 Fixed cycles

g19 Y-Z Plane g90 Absolute dimension

* programming
g33 Thread cutting, constant lead g91
Incremental deimension
g34 Thread cutting, increasing programming
 NC WORDS- BLU

• X, Y, Z, A, B, C Codes. coordinate positions of the tool.

The coordinates may be specified in decimal number (Decimal
Programming), or integer number (BLU Programming).

• BLU programming: leading zero, trailing zero.

– In the leading zero format:
• X00112 Y002275 Z001
– In the trailing zero format, the program looks like:
X11200 Y22750 Z10000
 NC WORDS – Circular Interpolation
Circular Interpolation:

Full circle ON
(5.000,4.000) ? destination
sequence no.
center
N0100 G02 X7.000 Y2.000 I5.000 J2.000

Cut from (5.000,4.000) to (7.000,2.000) CW

(7.000,2.000)
(5.000,2.000)
 NC WORDS- F and S
• F Code. feed speed.
inch/min (ipm), or ipr. Codes

• F code must be given before either G01, G02, or G03 can be used.

• Example:
N0100 G02 X7.000 Y2.000 I5.000 J2.000 F6.00

• S Code. cutting speed code.

Programmed in rpm.

• S code does not turn on the spindle, spindle is turned on by a M code.

• N0010 S1000
 NC WORDS- T and R Codes
• T Code. tool number. (1,2,2)
1
Actual tool change does not Initial height

occur until a tool change M 0.7" 2

code is specified.
R plane
0.3"

• R Code. cycle parameter. 1" 3 5

The cycle may be programmed in one
block, such as (cycle programming is Z point
4
vendor specific.):
N0010 G81 X1.000 Y2.000 Z0.000 R 1.300
 NC WORDS – M Codes
M Code. miscellaneous word.

Table 9.2. M codes

m00 Program stop m06 Tool change

m01 Optional stop m07 Flood coolant on

m02 End of program m08 Mist coolant on

m03 Spindle CW m09 Coolant off

m04 Spindle CCW m30 End of tape

m05 Spindle off

 MANUAL PART
Example 9.1 PROGRAMMING
Machined from a 5" x 4" x 2" workpiece. low carbon steel.
The process plan:
1. Set the lower left bottom corner of the part as the machine zero
point (floating zero programming).
2. Clamp the workpiece in a vise.
3. Mill the slot with a 3/4" four flute flat end mill made of carbide. From
the machinability data handbook, the recommended feed is 0.005
inch/tooth/rev, and the recommended cutting speed is 620 fpm.
4. Drill two holes with a 0.75" dia twist drill. Use 0.18 ipr feed and 100
fpm speed.
 PART2 ho les ø0 .7 5 ± 0 .0 0 1

DRAWING
.7 5 ø0 .0 0 1 M
MA B C

4 .0 0 0
R1 .0 0 0

3 .0 0 0

2 .0 0 0
1 .0 0 0

A 1 .7 5
3 .0 0 0
B
5 .0 0 0

.5 00

2.0 0 0

All dim en sion in inche s. All t ole ra nce ±0. 0 0 1 "

 SOLUTION TO
Solution: EXAMPLE
The cutting parameters need be converted into rpm and ipm.

Milling: RPM = 12 V = 12 x 620 fpm = 3,157 rpm

 D  0.75 inch

12 x 100 fpm
12 V
RPM = =  0.75 inch = 509 rpm
D
Drilling:
Vf = f RPM = 0.018 ipr x 509 rpm = 9.16 ipm
SETUP AND CUTTER
PATH p2 p3

H2 p6
p7
p8
H1
p4 p5

p9

p1
(0,0,0)

Drill End mill

Vise jaw

(0,0,0)
 CUTTER
LOCATIONS
The coordinates of each point (cutter location) are calculated below:

p1': ( 1.75+0.375, -0.1-0.375, 4.00) = (2.125, -0.475, 4.000)

p1: (2.125,-0.475, 2.000-0.500) = (2.125,-0.475,1.500)
p2: (2.125,4.000+0.100,1.500) = (2.125,4.100,1.500)
p3: (3.000-0.375,4.100,1.500) = (2.625,4.100,1.500)
p4: (2.625,1.375,1.500)
p5: (3.000,2.000-1.000+0.375,1.500) = (3.000,1.375,1.500)
p6: (3.000,2.625,1.500)
p7: (3.000,2.000,1.500)
p8: (2.625,2.000,1.500)
p9: (2.625,-0.100,1.500)
p9': (2.625,-0.100,4.000)
 PART
PROGRAM
Part program Explanation
N0010 G70 G 90 T08 M06 Set the machine to inch format
and absolute dimension
programming.

N0020 G00 X2.125 Y-0.475 Z4.000 S3157 Rapid to p1'.

N0030 G01 Z1.500 F63 M03 Down feed to p1, spindle CW.

N0040 G01 Y4.100 Feed to p2.

N0050 G01 X2.625 To p3.

N0060 G01 Y1.375 To p4.

 PART
Part program PROGRAM
Explanation

N0070 G01 X3.000 To p5.

N0080 G03 Y2.625 I3.000 J2.000 Circular interpolation
to p6.
N0090 G01 Y2.000 To p7.
N0100 G01 X2.625 To p8.
N0110 G01 Y-0.100 To p9
N0120 G00 Z4.000 T02 M05 To p9', spindle off, tool #2.
N0130 F9.16 S509 M06 Tool change, set new feed
and speed.
N0140 G81 X0.750 Y1.000 Z-0.1 R2.100 M03 Drill hole 1.
N0150 G81 X0.750 Y3.000 Z-0.1 R2.100 Drill hole 2.
N0160 G00 X-1.000 Y-1.000 M30 Move to home
position, stop
the machine.
 CNCS
VERIFICATION
CNCS 3D
DRAWING
 Offset
• Fixture s
– G10, G54, G54.1
• Diameter
• Tool
– Length compensation
– Part-Edge compensation
• Cutter Compensation – Next Slides
• Others Discussed in Lab Exercises (Simulators)
 Tool Radius
• Compensation
Cutter Compensation
Shifting tool path so that the actual finished cut is
either moved to the left or right of the programmed
path.
• Normally, shifted exactly by tool radius
• Tool Entry and Exit Issues
 Tool Radius
Start of Compensation.Compensation

(a) G41 (b) G42

G41 (or G42) and G01 in the same block ramp takes place at block N0010.
N0010 G01 G42 X0.500 Y1.700 (0.5, 1.7)

N0020 G01 X1.500 G41 (1.5, 1.7)

G42

G41 (or G42) and G01 in separate blocks the compensation is effective from
the start.
N0010 G41 G41

N0020 G01 X0.500 Y1.700

N0030 G01 X1.500 G42
 Tool Radius
Inside Corner.
Compensation
Cutter path is inside a corner, stops at the inside cutting point

(1.5, 2.0)
N0010 G41
G42
N0020 G01 X1.500 Y2.000
N0030 G01 X0.000 Y1.600
(0, 1.6)

Use of M96 and M97.

Cutting tool that is larger than the height of the step, M97 must be used
G41
M96
N0010 G41
N0020 G01 X1.000 Y1.000
G41
M97
N0030 G01 Y0.800 M97
N0040 G01 X2.000
 TOOL-RADIUS
COMPENSATION G41 G40
Cancel Tool Compensation.
G40 in the same block ramp off block.
N0060 G40 X2.000 Y1.700 M02 G42

(2.000, 1.700)

G40 in a block following the last motion, the compensation is

effective to the end point (2.000,1.700).
N0060 X2.000 Y1.700
G41
N0070 G40 M02
G40

G42 (2.000, 1.700)

 EXAMPL
Ethe square.
A square 2.0 in. x 2.0 in. is to be milled using a 1/2 in. end milling cutter.
Write an NC part program to make
Solution
Let us set up the lower left corner of the square at (6.0,6.0). Using
tool-radius compensation, the square can be produced.

2.000

2.000

(6,6)
 PART
Part Program PROGRAM
Explanation
N0010 G41 S1000 F5 M03 Begin compensation, set feed and speed, spindle on
N0020 G00 X6.000 Y6.000 Move to lower left corner
N0030 G01 Z-1.000 Plunge down the tool
N0040 Y8.000 Cut to upper left corner
N0050 X8.000 Cut to upper right corner
N0060 Y6.000 Cut to lower right corner
N0070 X6.000 Cut to lower left corner
N0080 Z1.000 Lift the tool
N0090 G40 M30 End compensation, stop the machine
 Exercise
• Complete the exercise on setting up an
NC machine. The exercise can be found
at

http://www.engr.psu.edu/cim/ie450/ie450as2.do
c
 TURNIN
2.875

G
.250

.625

1.125
R.125

1.000 Z
2.125
2.875 X

Part design

Cutter path Tool

Cutter path
 TURNIN
Programming tool point
G
No compensation needed.

Surfaces cut

IMAGINARY TOOL POINT

Programmed
tool path
Surface created
 COMPUTER ASSISTE PART
PROGRAMMING
Machine-oriented languages - machine
specific

General-purpose languagesPart
- program
use post
processors to generate
Language
machine specific code Processor

CL data

Translate input symbols Post

Processor
Arithmetic calculation
CL N-G code
CutterRS-494
BCL offset calculations
RS-273
Post processing
 Summary
• NC can reduce machining skill
• NC can reduce the time required to
machine a part
• NC provides sophisticated contour
capability
• NC is a flexible method for manufacture of
sophisticated machined components
Questions