CENTURION UNIVERSITY OF TECHNOLOGY AND MANAGEMENT

PHARMACOGNOSY AND PHYTOCHEMISTRY I

LIPIDS

UNDER THE GUIDANCE PRESENTED BY:-

OF:- RINKU KUNDU
SUBHASHREE DAS MAM B.PHARM(4TH SEM)
ASSISTANT PROFESSOR
DEPARTMENT OF B.PHARM
 INTRODUCTION TO LIPIDS
CONTENT
DRUG CONTAING LIPIDS

BEES WAX

LANOLIN

CASTOR OIL
INTRODUCTION

LIPIDS
The lipids are a large and diverse group of naturally occurring
organic compounds that are related by their solubility in nonpolar
organic solvents (e.g. ether, chloroform, acetone, and benzene)
and are generally insoluble in water. There is great structural
variety among the lipids and comprise of fixed oils, fats, and
waxes. The lipids of physiological importance for humans have
the following major functions:
1. They serve as structural components of biological
membranes.
2. They provide energy reserves, predominantly in the form of
triacylglycerols.
3. Both lipids and lipid derivatives serve as vitamins and
hormones.
4. Lipophilic bile acids aid in lipid solubilization.
 FIXED OIL AND FATS WAXES
LIPIDS  Fixed oils and fats are obtained from plants
or animal. They are rich in calories and are
 Waxes are esters of long-chain fatty acids and
alcohols. The fatty acids are same in wax and fats,
the reserve substances of the plants and but the difference being saponification.
animals.  Waxes are saponified only by alcoholic alkali but
 They differ only according to their melting the fats may be saponified either by alcoholic alkali
or by aqueous alkali. Along with fatty acids it also
point and chemically they belong to the
contains monohydroxy alcohols of high molecular
same group. If a substance is liquid at 15.5–
weight especially cetyl alcohol, melissyl alcohol,
16.5°C it is called fixed oils and solid or and myricyl alcohol.
semisolid at the above temperature, it is  Sometimes cholesterol or phytosterols are also
called fats. present. As such they are not suitable as food
 They possess the following properties: because hydrolysing enzymes of wax are not
 Fixed oils are thick, viscous, yellow- present in system.
coloured liquids with characteristic odour.  Waxes are widely distributed in nature. The leaves
 They are non-volatile and cannot be and fruits of many plants have waxy coatings,
distilled. which may protect them from dehydration and
 Fixed oils and fats are insoluble in water and small predators. The feathers of birds and the fur of
alcohol and are soluble in lipid solvents like some animals have similar coatings which serve as
light petroleum, ether, chloroform, and a water repellent.
 Spermaceti, beeswax, carnauba wax, etc. are the
benzene.
examples of waxes.
BEES WAX
SYNONYMS
White beeswax, yellow beeswax,
cera alba, and cera flava.

BIOLOGICAL SOURCE
Beeswax is the purified wax obtained from
honeycomb of hive bee, Apis mellifera and other
species of Apis, belonging to family Apidae.

GEOGRAPHICAL SOURCE
It is mainly found in Jamaica, Egypt,
Africa, India, France, Italy, California
etc.

METHOD OF PREPARATION
The combs and capping honeycomb broken and boiled in soft water.
These are then enclosed in a porous bag weighted to keep under water, the boiling causes
oozing of the wax which gets collected outside the bag and forms a cake after cooling.
The debris on outer surface is removed by scraping, then purified by heating in boiling water
or dil. Sulphuric acid and settling.
The process is repeated several times and finally wax is skimmed off then by various
techniques are adopted to bleach wax such as treatment with hydrogen peroxide, chromic acid,
ozone, etc. then the bees wax found.
 BEES WAX
DESCRIPTION
 Colour – yellow to
yellowish brown
 Odour – agreeable
and honey-like
 Taste - faint and CHEMICAL CONSTITUENTS
characteristic Beeswax contains myricin, which is
melissyl palmitate; melting point 64°C,
free cerotic acid (C26H52O2 ), myricyl
alcohol (C30H61OH) is liberated when
myricyl palmitate is saponified. Melissic
EXTRA FEATURES acid, some unsaturated acids of the oleic
 Yellow beeswax is smooth series, ceryl alcohol, and 12 to 13% higher
and soft to touch but breaks hydrocarbons are present.
with granular fracture. USES
 In hot water it melts in liquid
form and can be made any  Beeswax is used in the preparation of ointments,
required shape and design plaster, and polishes.
after cooling.  It is also used in cosmetics for preparation of
 It is insoluble in water, lipsticks and face creams.
soluble in chloroform, ether,
fixed oil, and volatile oils
(hot turpentine oil) and
sparingly soluble in alcohol.
 LANOLIN
SYNONYM METHOD OF PREPARATION
Wool fat, Oesipos, Agnin, Alapurin, Wool is cut and washed with a soap or alkali. An
Anhydrous lanolin, Adeps lanae, Laniol. emulsion of wool fat, called as wool grease, takes place
in water. Raw lanolin is separated by cracking the
emulsion with sulphuric acid. Wool grease floats on the
upper layer and fatty acids are dissolved in the lower
layer. Lanolin is purified by treating with sodium
peroxide and bleaching with reagents.

BIOLOGICAL SOURCE DESCRIPTION

Lanolin is the fat-like purified secretion of  Colour : Whitish yellow
the sebaceous glands which is deposited  Odour : Characteristic
into the wool fibres of sheep, Ovis aries  Taste : Bland
Linn., belonging to family Bovidae.

EXTRA FEATURES
 It is found in the form of ointment like
GEOGRAPHICAL SOURCE
mass and on heating in water bath, it
Commercially it is prepared in New
seperates into two layers.
Zealand, Australia, USA and India.
 Practically it is insoluble in water,
sparingly soluble in cold, more in hot
alcohol, freely soluble in benzene,
chloroform, ether, carbon disulphide,
acetone, and petroleum ether.
 LANOLIN
CHEMICAL CONSTITUENTS
Lanolin is a complex mixture of esters and polyesters of 33
high molecular weight alcohols, and 36 fatty acids. The chief
constituents of lanolin are cholesterol, isocholesterol,
unsaturated monohydric alcohols of the formula C27H45OH, USES
both free and combined with lanoceric (C30H60O4 ),  It is used as a moisturizer to treat dry, rough, scaly,
lanopalmitic (C16H22O3 ), carnaubic, and other fatty acids. itchy skin and in minor skin irritations.
Lanolin also contains esters of oleic and myristic acids,  It is mainly used as water absorbable ointment base.
aliphatic alcohols, such as cetyl, ceryl and carnaubyl alcohols,  Lanolin is often used as a raw material for producing
lanosterol, and agnosterol. cholecalciferol using irradiation (vitamin D).

INDENTIFICATION TEST
Dissolve 0.5 g of lanolin in chloroform, and
to it add 1 ml of acetic anhydride and two
drops of sulphuric acid. A deep green colour
is produced, indicating the presence of
cholesterol.
 01
CASTOR OIL SYNONYMS
Castor bean oil, castor oil seed, oleum ricini,
ricinus oil, oil of palma christi, cold-drawn
castor oil.

02
BIOLOGICAL SOURCE
Castor oil is the fixed oil obtained by cold
expression of the seeds of Ricinus communis Linn.,
belonging to family Euphorbiaceae.

03
GEOGRAPHICAL SOURCE
It is mainly found in India, Brazil, America,
China, Thailand. In India, it is cultivated in
Gujarat, Andhra Pradesh, and Karnataka.
 METHOD OF PREPARATION

CASTOR Castor oil is obtained from castor seeds. The oil is obtained by two ways;
either after the removal of the seed coat or with the seed coat. Seed coats are

OIL
removed by crushing the seeds under the grooved rollers and then they are
subjected to a current of air to blow the testas. The kernels are fed in oil
expellers and at room temperature they are expressed with 1 to 2 tons
pressure per square inch till about 30% oil is obtained. The oil is filtered,
steamed 80–100°C to facilitate the coagulation and precipitation of
poisonous principle ricin, proteins and enzyme lipase present in it. Oil is then
filtered and this oil with 1% acidity is used for medical purpose. The oil cake
which remains contains of ricin, lipase and about 20% oil. The cake is
grounded, steamed to 40° to 80°C, and a pressure of 3 tons pressure per sq.
inch is applied. This yields the second quality of oil with 5% acidity and is
used for industrial purpose. The residual cake which remains after the
expression of the second quality oil still contains about 8 to 10% oil. This oil
is obtained by subjecting it to extraction in soxhlet with lipid solvents. This
oil obtained is also used in industry. The residual cake is used as manure and
not fed to animal due to the presence of ricin. The cake is also used for the
production of lipase.
 CASTOR OIL

DESCRIPTION IDENTIFICATION TEST

 Colour - colourless or slightly yellow coloured About 5 ml of light petroleum (50° to 60°) when
 Odour – Soft and faint mixed with 10 ml of castor oil at 15.5° shows a clear
 Taste – slightly acrid taste solution, but if the amount of light petroleum is
 Solubility - Soluble in alcohol, organic increased to 15 ml, the mixture becomes turbid. This
solvents like benzene, chloroform but test is not shown by other oils.
insoluble in other mineral oils.

CHEMICAL CONSTITUENTS USES

The oil is made up of triglycerides of 91-95% ricinoleic  Castor oil is mild purgative, fungistatic, used as an ointment base, as
acid, 4-5% linoleic acid, and 1-2% palmitic and stearic plasticizer, wetting agents, as a lubricating agent.
acids. The viscosity mainly depends on the presence of  Ricinoleic acid is used in contraceptive creams and jellies.
ricinoleic acid (95%). Apart from that Oleic acid (6%),  It is also used as an emollient in the preparation of lipsticks, in tooth
Linolenic acid (5%), stearic acid and palmitic acid are formulation, as an ingredient in hair oil.
also present.  The dehydrated oil is used in the manufacture of linoleum and alkyl
resin.
 LIPIDS

Thank You!!