Scribd
Upload
622 views15 pages

Computer Systems Servicing

This document outlines the qualifications and requirements for Computer Systems Servicing NC II. It consists of competencies in installing and configuring computer systems, setting up computer networks and servers, and maintaining and repairing computer systems and networks. The core competencies include installing and configuring computer systems, setting up computer networks, setting up computer servers, and maintaining and repairing computer and networks. Specific skills are outlined for each competency, along with the learning outcomes, methodology, and assessment approach. Requirements for passing the assessment include knowledge of topics like assembling computers safely, installing operating systems correctly, configuring networking and servers, and performing maintenance tasks properly.

Uploaded by

Akmad Ali Abdul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
622 views15 pages

Computer Systems Servicing

This document outlines the qualifications and requirements for Computer Systems Servicing NC II. It consists of competencies in installing and configuring computer systems, setting up computer networks and servers, and maintaining and repairing computer systems and networks. The core competencies include installing and configuring computer systems, setting up computer networks, setting up computer servers, and maintaining and repairing computer and networks. Specific skills are outlined for each competency, along with the learning outcomes, methodology, and assessment approach. Requirements for passing the assessment include knowledge of topics like assembling computers safely, installing operating systems correctly, configuring networking and servers, and performing maintenance tasks properly.

Uploaded by

Akmad Ali Abdul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 15

COMPUTER SYSTEMS SERVICING

NC II QUALIFICATIONS

consists of competencies that must possess to enable to install and


configure computers systems, set-up computer networks and servers and
to maintain and repair computer systems and networks.

The units of competency comprising this qualification include the


following:
 

BASIC COMPETENCIES

Participate in workplace communication


Work in a team environment
Practice career professionalism
Practice occupational health and safety procedures
COMMON COMPETENCIES
Apply quality standards
Perform computer operations
Perform mensuration and calculation
Prepare and interpret technical drawing
Use hand tools
Terminate and connect electrical wiring and electronic circuits
Test electronic components

CORE COMPETENCIES
Install and configure computer systems
Set-up Computer Networks
Set-up Computer Servers
Maintain and Repair Computer Systems and Networks
 INSTALL AND CONFIGURE COMPUTER SYSTEMS

This unit covers the outcomes required in installing and configuring


desktop and workstation computers systems. It consists of
competencies to assemble computer hardware, install operating
system and drivers for peripherals/devices, and install application
software as well as to conduct testing and documentation.

 Set-up Computer Networks

This unit covers the outcomes required in setting-up computers


networks for LANs and small-office home-office (SOHO) systems. It
consists of competencies to install network cables, set network
configuration, set router/Wi-Fi/ wireless access point/repeater
configuration as well as to inspect and test the configured computer
networks.
 Set-up Computer Servers

This unit covers the knowledge, skills and attitudes needed to set-
up computer servers for LANs and SOHO systems. It consists of
competencies to set-up user access and configures network services
as well as to perform testing, documentation and pre-deployment
procedures.

 Maintain and Repair Computer Systems and Networks

This unit covers the knowledge, skills and attitudes needed to


maintain and service computer systems and networks.
GUIDELINES
CORE COMPETENCIES
Unit of Competency Learning Outcome Methodology Assessment Approach
1. Install and 1. Assemble computer hardware  Lecture  Written examination
configure
2. Install operating system and  Discussion  Practical
computer systems
drivers for peripherals/ devices. examination
 Demonstration
3. Install the computer application
 Viewing multimedia
software
4. Conduct testing and
documentation
1. Set-up computer 1. Install network cables  Lecture  Written examination
networks
2. Set network configuration  Discussion  Practical
3. Set router/Wi-Fi/ wireless access  Demonstration examination
point/repeater configuration  Viewing multimedia
4. Inspect and test the configured
computer networks
1. Set-up Computer 1. Set-up user access  Lecture  Written examination
Servers
2. Configure network services  Discussion  Practical
examination
3. Perform testing, documentation  Demonstration
and pre-deployment practices
 Viewing multimedia
 
1. Maintain and 1. Plan and prepare for  Lecture  Written examination
repair computer maintenance and repair
 Discussion  Practical
systems and 2. Maintain computer systems and examination
networks  Demonstration
networks  
 Viewing multimedia
3. Diagnose faults of computer
systems
4. Rectify/correct defects in
computer systems
5. Inspect and test the computer
systems and networks
 
How to pass the assessment of
Computer Systems Servicing
NC II?
To pass this assessment you need these following:
For Assemble PC:
1. Make sure you are knowledgeable about static electricity or ESD, why do I
say that? Because I see some candidates or students taking this for granted
and the result? The computer have been damaged and can't even boot in BIOS
settings.
2. Make sure you are familiar in the connection of Front Panel Led's in the
motherboard because not all mobo have the same standard in connecting this
wire(s). And take note some Assessor are very strict on this part, though your
PC is working they will not accept incorrect connection.
3. Be 90% calm and 10% nervous. Being nervous is really part of taking the
assessment. :P , if you're not then good for you :)
For OS Installation:
1. This is the easiest part, just make sure you install the operating system in
its right location I mean Drive C: (exception is for the dual OS). If you failed
on this one it will consume your time, always remember that the assessment
has a time duration.
2. Install the appropriate drivers ONLY, Do not install other software
included in the CD/DVD installer (Ex. Adobe Acrobat etc.) it will just
consume your time.
For Networking:
1. Use a good crimping tool and punch down tool
2. Create network cables slowly but surely (but make sure it will not take too
long, we have time duration remember?)
3. Make sure you memorize the wiring arrangement of creating straight-thru and
crossover cables
4. You must be knowledgeable in configuring wireless router
For Server Setup:
1. You should know how to configure the following:
 DHCP
 DNS
 QOS
 MAC Filtering
 File/Printer Server
 Remote Desktop

For Maintenance:
1. You should know how to:
 Create and Use System Image
 Install and Use anti-virus, registry cleaner, disk defragmentation
 Create and Use System Restore
What are the requirements in
Computer Systems Servicing NC
II?
These are the requirements (Tools, Materials, Equipment) for CSS NC II:
For Assemble PC:
 Screw Drivers (Standard, Philip)
 Pliers (Mechanical, Longnose) - optional
 Anti-static Wrist Strap - optional
 Anti-static Mat - optional
For OS Installation:
 Windows Server 2008 Installer
 Windows 7 Installer
 Device Drivers
For OS Installation:
 Windows Server 2008 Installer
 Windows 7 Installer
 Device Drivers
For Networking:
 Impact Punch Down Tool
 Crimping Tool
 RJ-45
 Modular RJ-45 I/O
 Patch Panel
 Network Switch
 Router with WI-FI
For Server Setup:
 Windows Server 2008 & 2014 PC
 Windows 7,8 & 10 PC
 Laptop (Windows 7 or Windows 8)
For Maintenance:
 Blank DVD-R/USB Bootable (for System Image)
 Anti-virus Installer (Ex. Avast, Avg etc.)
 Registry Cleaner (Ex. CCleaner)
 Disk Defragmenter (Ex. Defragler)
 System Restore (Restorepoint)

A person who has achieved this Qualification is competent to be:


 Computer Assembler
 Computer Service Technician
 Network Technician
 Computer Maintenance Technician
THANK YOU…!

You might also like